Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]:54494 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752026AbbBLFDb (ORCPT ); Thu, 12 Feb 2015 00:03:31 -0500 From: Vasanthakumar Thiagarajan To: CC: , Vasanthakumar Thiagarajan Subject: [PATCH] ath10k: Fix interrupt storm Date: Thu, 12 Feb 2015 10:29:22 +0530 Message-ID: <1423717162-7788-1-git-send-email-vthiagar@qti.qualcomm.com> (sfid-20150212_060334_441136_16BB3A11) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Promiscuous mode is enabled when wlan interface is added to bridge. ath10k creates a monitor mode when promiscuous mode is enabled. When monitor vdev is runing along with other vdev(s) there is a huge number of interrupts generated especially in noisy condition. Fix this by not enabling promiscuous(monitor) mode when already a vdev is running. This does not change the support of virtual interface of type monitor along with other vdevs. Signed-off-by: Vasanthakumar Thiagarajan --- drivers/net/wireless/ath/ath10k/mac.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index d6d2f0f..310e608 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -932,6 +932,14 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, bool restart) return ret; } + if (ar->filter_flags & FIF_PROMISC_IN_BSS) { + ar->filter_flags &= ~FIF_PROMISC_IN_BSS; + ath10k_dbg(ar, ATH10K_DBG_MAC, "Disabling promiscuous mode when we start a vdev\n"); + ret = ath10k_monitor_recalc(ar); + if (ret) + return ret; + } + ar->num_started_vdevs++; ath10k_recalc_radar_detection(ar); @@ -3369,6 +3377,14 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw, changed_flags &= SUPPORTED_FILTERS; *total_flags &= SUPPORTED_FILTERS; + if (*total_flags & FIF_PROMISC_IN_BSS) { + if (ar->num_started_vdevs) { + ath10k_dbg(ar, ATH10K_DBG_MAC, + "Not enabling promiscuous mode when already a vdev is running\n"); + mutex_unlock(&ar->conf_mutex); + return; + } + } ar->filter_flags = *total_flags; ret = ath10k_monitor_recalc(ar); -- 1.7.9.5