Return-path: Received: from mail-la0-f46.google.com ([209.85.215.46]:41546 "EHLO mail-la0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752497AbbCIMnN (ORCPT ); Mon, 9 Mar 2015 08:43:13 -0400 Received: by labmn12 with SMTP id mn12so3448093lab.8 for ; Mon, 09 Mar 2015 05:43:12 -0700 (PDT) From: Marek Puzyniak To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Michal Kazior , Marek Puzyniak Subject: [PATCH v3 1/3] ath10k: unify tx mode and dispatch Date: Mon, 9 Mar 2015 13:45:36 +0100 Message-Id: <1425905138-9966-2-git-send-email-marek.puzyniak@tieto.com> (sfid-20150309_134317_871622_9B996338) In-Reply-To: <1425905138-9966-1-git-send-email-marek.puzyniak@tieto.com> References: <1425905138-9966-1-git-send-email-marek.puzyniak@tieto.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Michal Kazior There are a few different tx paths depending on firmware and frame itself. Creating a uniform decision will make it possible to switch between different txmode easier, both for testing and for future features as well. Signed-off-by: Michal Kazior Signed-off-by: Marek Puzyniak --- drivers/net/wireless/ath/ath10k/core.h | 2 + drivers/net/wireless/ath/ath10k/htt_rx.c | 8 -- drivers/net/wireless/ath/ath10k/htt_tx.c | 30 +++--- drivers/net/wireless/ath/ath10k/mac.c | 155 ++++++++++++++++++++++++------- drivers/net/wireless/ath/ath10k/mac.h | 8 ++ 5 files changed, 144 insertions(+), 59 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 9b8f486..70bd02b 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -82,6 +82,8 @@ struct ath10k_skb_cb { dma_addr_t paddr; u8 eid; u8 vdev_id; + enum ath10k_hw_txrx_mode txmode; + bool is_protected; struct { u8 tid; diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 01a2b38..756fc19 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -637,14 +637,6 @@ static int ath10k_htt_rx_crypto_tail_len(struct ath10k *ar, return 0; } -struct rfc1042_hdr { - u8 llc_dsap; - u8 llc_ssap; - u8 llc_ctrl; - u8 snap_oui[3]; - __be16 snap_type; -} __packed; - struct amsdu_subframe_hdr { u8 dst[ETH_ALEN]; u8 src[ETH_ALEN]; diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index cbd2bc9..5b2c61b 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -420,9 +420,8 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) int res; u8 flags0 = 0; u16 msdu_id, flags1 = 0; - dma_addr_t paddr; - u32 frags_paddr; - bool use_frags; + dma_addr_t paddr = 0; + u32 frags_paddr = 0; res = ath10k_htt_tx_inc_pending(htt); if (res) @@ -440,12 +439,6 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) prefetch_len = min(htt->prefetch_len, msdu->len); prefetch_len = roundup(prefetch_len, 4); - /* Since HTT 3.0 there is no separate mgmt tx command. However in case - * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx - * fragment list host driver specifies directly frame pointer. */ - use_frags = htt->target_version_major < 3 || - !ieee80211_is_mgmt(hdr->frame_control); - skb_cb->htt.txbuf = dma_pool_alloc(htt->tx_pool, GFP_ATOMIC, &paddr); if (!skb_cb->htt.txbuf) { @@ -466,7 +459,12 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) if (res) goto err_free_txbuf; - if (likely(use_frags)) { + switch (skb_cb->txmode) { + case ATH10K_HW_TXRX_RAW: + case ATH10K_HW_TXRX_NATIVE_WIFI: + flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT; + /* pass through */ + case ATH10K_HW_TXRX_ETHERNET: frags = skb_cb->htt.txbuf->frags; frags[0].paddr = __cpu_to_le32(skb_cb->paddr); @@ -474,15 +472,17 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) frags[1].paddr = 0; frags[1].len = 0; - flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI, - HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); + flags0 |= SM(skb_cb->txmode, HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); frags_paddr = skb_cb->htt.txbuf_paddr; - } else { + break; + case ATH10K_HW_TXRX_MGMT: flags0 |= SM(ATH10K_HW_TXRX_MGMT, HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); + flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT; frags_paddr = skb_cb->paddr; + break; } /* Normally all commands go through HTC which manages tx credits for @@ -508,11 +508,9 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) prefetch_len); skb_cb->htt.txbuf->htc_hdr.flags = 0; - if (!ieee80211_has_protected(hdr->frame_control)) + if (!skb_cb->is_protected) flags0 |= HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT; - flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT; - flags1 |= SM((u16)vdev_id, HTT_DATA_TX_DESC_FLAGS1_VDEV_ID); flags1 |= SM((u16)tid, HTT_DATA_TX_DESC_FLAGS1_EXT_TID); if (msdu->ip_summed == CHECKSUM_PARTIAL) { diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index bfe1eca..d5771e4 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2382,6 +2382,43 @@ static u8 ath10k_tx_h_get_vdev_id(struct ath10k *ar, struct ieee80211_vif *vif) return 0; } +static enum ath10k_hw_txrx_mode +ath10k_tx_h_get_txmode(struct ath10k *ar, struct ieee80211_vif *vif, + struct sk_buff *skb) +{ + const struct ieee80211_hdr *hdr = (void *)skb->data; + __le16 fc = hdr->frame_control; + + if (!vif || vif->type == NL80211_IFTYPE_MONITOR) + return ATH10K_HW_TXRX_RAW; + + if (ieee80211_is_mgmt(fc)) + return ATH10K_HW_TXRX_MGMT; + + /* Workaround: + * + * NullFunc frames are mostly used to ping if a client or AP are still + * reachable and responsive. This implies tx status reports must be + * accurate - otherwise either mac80211 or userspace (e.g. hostapd) can + * come to a conclusion that the other end disappeared and tear down + * BSS connection or it can never disconnect from BSS/client (which is + * the case). + * + * Firmware with HTT older than 3.0 delivers incorrect tx status for + * NullFunc frames to driver. However there's a HTT Mgmt Tx command + * which seems to deliver correct tx reports for NullFunc frames. The + * downside of using it is it ignores client powersave state so it can + * end up disconnecting sleeping clients in AP mode. It should fix STA + * mode though because AP don't sleep. + */ + if (ar->htt.target_version_major < 3 && + (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)) && + !test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, ar->fw_features)) + return ATH10K_HW_TXRX_MGMT; + + return ATH10K_HW_TXRX_NATIVE_WIFI; +} + /* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS * Control in the header. */ @@ -2411,6 +2448,33 @@ static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb) } } +static void ath10k_tx_h_8023(struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr; + struct rfc1042_hdr *rfc1042; + struct ethhdr *eth; + size_t hdrlen; + u8 da[ETH_ALEN]; + u8 sa[ETH_ALEN]; + __be16 type; + + hdr = (void *)skb->data; + hdrlen = ieee80211_hdrlen(hdr->frame_control); + rfc1042 = (void *)skb->data + hdrlen; + + ether_addr_copy(da, ieee80211_get_DA(hdr)); + ether_addr_copy(sa, ieee80211_get_SA(hdr)); + type = rfc1042->snap_type; + + skb_pull(skb, hdrlen + sizeof(*rfc1042)); + skb_push(skb, sizeof(*eth)); + + eth = (void *)skb->data; + ether_addr_copy(eth->h_dest, da); + ether_addr_copy(eth->h_source, sa); + eth->h_proto = type; +} + static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct ieee80211_vif *vif, struct sk_buff *skb) @@ -2447,45 +2511,51 @@ static bool ath10k_mac_need_offchan_tx_work(struct ath10k *ar) ar->htt.target_version_minor >= 4); } -static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb) +static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue; int ret = 0; - if (ar->htt.target_version_major >= 3) { - /* Since HTT 3.0 there is no separate mgmt tx command */ - ret = ath10k_htt_tx(&ar->htt, skb); - goto exit; + spin_lock_bh(&ar->data_lock); + + if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) { + ath10k_warn(ar, "wmi mgmt tx queue is full\n"); + ret = -ENOSPC; + goto unlock; } - if (ieee80211_is_mgmt(hdr->frame_control)) { - if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, - ar->fw_features)) { - if (skb_queue_len(&ar->wmi_mgmt_tx_queue) >= - ATH10K_MAX_NUM_MGMT_PENDING) { - ath10k_warn(ar, "reached WMI management transmit queue limit\n"); - ret = -EBUSY; - goto exit; - } + __skb_queue_tail(q, skb); + ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work); - skb_queue_tail(&ar->wmi_mgmt_tx_queue, skb); - ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work); - } else { - ret = ath10k_htt_mgmt_tx(&ar->htt, skb); - } - } else if (!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, - ar->fw_features) && - ieee80211_is_nullfunc(hdr->frame_control)) { - /* FW does not report tx status properly for NullFunc frames - * unless they are sent through mgmt tx path. mac80211 sends - * those frames when it detects link/beacon loss and depends - * on the tx status to be correct. */ - ret = ath10k_htt_mgmt_tx(&ar->htt, skb); - } else { - ret = ath10k_htt_tx(&ar->htt, skb); +unlock: + spin_unlock_bh(&ar->data_lock); + + return ret; +} + +static void ath10k_mac_tx(struct ath10k *ar, struct sk_buff *skb) +{ + struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb); + struct ath10k_htt *htt = &ar->htt; + int ret = 0; + + switch (cb->txmode) { + case ATH10K_HW_TXRX_RAW: + case ATH10K_HW_TXRX_NATIVE_WIFI: + case ATH10K_HW_TXRX_ETHERNET: + ret = ath10k_htt_tx(htt, skb); + break; + case ATH10K_HW_TXRX_MGMT: + if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, + ar->fw_features)) + ret = ath10k_mac_tx_wmi_mgmt(ar, skb); + else if (ar->htt.target_version_major >= 3) + ret = ath10k_htt_tx(htt, skb); + else + ret = ath10k_htt_mgmt_tx(htt, skb); + break; } -exit: if (ret) { ath10k_warn(ar, "failed to transmit packet, dropping: %d\n", ret); @@ -2558,7 +2628,7 @@ void ath10k_offchan_tx_work(struct work_struct *work) ar->offchan_tx_skb = skb; spin_unlock_bh(&ar->data_lock); - ath10k_tx_htt(ar, skb); + ath10k_mac_tx(ar, skb); ret = wait_for_completion_timeout(&ar->offchan_tx_completed, 3 * HZ); @@ -2783,6 +2853,7 @@ static void ath10k_tx(struct ieee80211_hw *hw, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_vif *vif = info->control.vif; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + __le16 fc = hdr->frame_control; /* We should disable CCK RATE due to P2P */ if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE) @@ -2791,12 +2862,26 @@ static void ath10k_tx(struct ieee80211_hw *hw, ATH10K_SKB_CB(skb)->htt.is_offchan = false; ATH10K_SKB_CB(skb)->htt.tid = ath10k_tx_h_get_tid(hdr); ATH10K_SKB_CB(skb)->vdev_id = ath10k_tx_h_get_vdev_id(ar, vif); + ATH10K_SKB_CB(skb)->txmode = ath10k_tx_h_get_txmode(ar, vif, skb); + ATH10K_SKB_CB(skb)->is_protected = ieee80211_has_protected(fc); - /* it makes no sense to process injected frames like that */ - if (vif && vif->type != NL80211_IFTYPE_MONITOR) { + switch (ATH10K_SKB_CB(skb)->txmode) { + case ATH10K_HW_TXRX_MGMT: + case ATH10K_HW_TXRX_NATIVE_WIFI: ath10k_tx_h_nwifi(hw, skb); ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb); ath10k_tx_h_seq_no(vif, skb); + break; + case ATH10K_HW_TXRX_ETHERNET: + ath10k_tx_h_8023(skb); + break; + case ATH10K_HW_TXRX_RAW: + /* FIXME: Packet injection isn't implemented. It should be + * doable with firmware 10.2 on qca988x. + */ + WARN_ON_ONCE(1); + ieee80211_free_txskb(hw, skb); + return; } if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) { @@ -2818,7 +2903,7 @@ static void ath10k_tx(struct ieee80211_hw *hw, } } - ath10k_tx_htt(ar, skb); + ath10k_mac_tx(ar, skb); } /* Must not be called with conf_mutex held as workers can use that also. */ diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h index 6829611..7b63def 100644 --- a/drivers/net/wireless/ath/ath10k/mac.h +++ b/drivers/net/wireless/ath/ath10k/mac.h @@ -28,6 +28,14 @@ struct ath10k_generic_iter { int ret; }; +struct rfc1042_hdr { + u8 llc_dsap; + u8 llc_ssap; + u8 llc_ctrl; + u8 snap_oui[3]; + __be16 snap_type; +} __packed; + struct ath10k *ath10k_mac_create(size_t priv_size); void ath10k_mac_destroy(struct ath10k *ar); int ath10k_mac_register(struct ath10k *ar); -- 2.1.4