Return-path: Received: from mail-la0-f44.google.com ([209.85.215.44]:35114 "EHLO mail-la0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933477AbbDJNap (ORCPT ); Fri, 10 Apr 2015 09:30:45 -0400 Received: by labbd9 with SMTP id bd9so13283145lab.2 for ; Fri, 10 Apr 2015 06:30:43 -0700 (PDT) From: Michal Kazior To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Michal Kazior Subject: [PATCH 2/4] ath10k: fix multiple key static wep with ibss Date: Fri, 10 Apr 2015 13:23:21 +0000 Message-Id: <1428672203-8604-3-git-send-email-michal.kazior@tieto.com> (sfid-20150410_153052_402893_E82A7F02) In-Reply-To: <1428672203-8604-1-git-send-email-michal.kazior@tieto.com> References: <1428672203-8604-1-git-send-email-michal.kazior@tieto.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Apparently firmware requires both pairwise and groupwise keys to be installed per-peer for static WEP in IBSS. This wasn't necessary for AP mode (and installing both doesn't seem to break AP mode thus there's no special handling). Also there seems to be some kind of issue with mapping tx/rx keys in firmware properly which resulted in wrong keys being used and broken communication between devices. It can be argued the vdev param part is more of a workaround than a real fix. However I couldn't figure out how to fix this differently. It works and isn't super ugly. Signed-off-by: Michal Kazior --- drivers/net/wireless/ath/ath10k/mac.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 6664bcc9ba88..93f753cb839a 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -230,9 +230,13 @@ static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif, flags = 0; flags |= WMI_KEY_PAIRWISE; - /* set TX_USAGE flag for default key id */ - if (arvif->def_wep_key_idx == i) - flags |= WMI_KEY_TX_USAGE; + ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY, + addr, flags); + if (ret) + return ret; + + flags = 0; + flags |= WMI_KEY_GROUP; ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY, addr, flags); @@ -244,6 +248,27 @@ static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif, spin_unlock_bh(&ar->data_lock); } + /* In some cases (notably with static WEP IBSS with multiple keys) + * multicast Tx becomes broken. Both pairwise and groupwise keys are + * installed already. Using WMI_KEY_TX_USAGE in different combinations + * didn't seem help. Using def_keyid vdev parameter seems to be + * effective so use that. + * + * FIXME: Revisit. Perhaps this can be done in a less hacky way. + */ + if (arvif->def_wep_key_idx == -1) + return 0; + + ret = ath10k_wmi_vdev_set_param(arvif->ar, + arvif->vdev_id, + arvif->ar->wmi.vdev_param->def_keyid, + arvif->def_wep_key_idx); + if (ret) { + ath10k_warn(ar, "failed to re-set def wpa key idxon vdev %i: %d\n", + arvif->vdev_id, ret); + return ret; + } + return 0; } -- 2.1.4