Return-path: Received: from sabertooth01.qualcomm.com ([65.197.215.72]:58628 "EHLO sabertooth01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751271AbbDARWr (ORCPT ); Wed, 1 Apr 2015 13:22:47 -0400 From: Kalle Valo To: Michal Kazior CC: , Subject: Re: [PATCH] ath10k: don't call quiet mode if it's not implemented References: <1427200817-7407-1-git-send-email-michal.kazior@tieto.com> Date: Wed, 1 Apr 2015 20:22:29 +0300 In-Reply-To: <1427200817-7407-1-git-send-email-michal.kazior@tieto.com> (Michal Kazior's message of "Tue, 24 Mar 2015 12:40:17 +0000") Message-ID: <87k2xvyd9m.fsf@kamboji.qca.qualcomm.com> (sfid-20150401_192252_137244_3543E885) MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: linux-wireless-owner@vger.kernel.org List-ID: Michal Kazior writes: > qca6174 and wmi-tlv doesn't have quiet mode > implemented. Don't even attempt to call it. This > fixes a warning when bringing first interface up: > > failed to set quiet mode period 100 duarion 0 enabled 0 ret -95 > > Fixes: 8515b5c79a54 ("ath10k: configure thermal throttle while powering up") > Signed-off-by: Michal Kazior Thanks, applied. -- Kalle Valo