Return-path: Received: from mail-pd0-f182.google.com ([209.85.192.182]:36666 "EHLO mail-pd0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752895AbbEQOII convert rfc822-to-8bit (ORCPT ); Sun, 17 May 2015 10:08:08 -0400 Received: by pdfh10 with SMTP id h10so107793418pdf.3 for ; Sun, 17 May 2015 07:08:08 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: References: <5557556C.2080107@lwfinger.net> <5557B396.9080300@gmail.com> <555894E7.3080600@hauke-m.de> Date: Sun, 17 May 2015 16:08:08 +0200 Message-ID: (sfid-20150517_160814_759562_629FF849) Subject: Fwd: lspci not working From: Schmirr Wurst To: Schmirr Wurst , Arend van Spriel , =?UTF-8?Q?S=C3=A9bastien_Brennion?= , linux-wireless , b43-dev , Larry Finger Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: ---------- Forwarded message ---------- From: Schmirr Wurst Date: 2015-05-17 16:07 GMT+02:00 Subject: Re: lspci not working To: Hauke Mehrtens 2015-05-17 15:17 GMT+02:00 Hauke Mehrtens : > On 05/17/2015 03:00 PM, Schmirr Wurst wrote: >> 2015-05-17 14:57 GMT+02:00 Schmirr Wurst : >>> I'm not familiar with inline answers and mailing list, tried to put >>> some order in my answer + log file >>> >>> 2015-05-17 13:18 GMT+02:00 Rafał Miłecki : >>>> On 17 May 2015 at 12:23, Arend van Spriel wrote: >>>>> On 05/17/15 02:21, Schmirr Wurst wrote: >>>>>> I tried as suggested to had a look at >>>>>> /sys/bus/sdio/devices, but the only devices around there a 3 >>>>>> mmc1:0001:1 to :3, I guess it is something else... >>>>>> >>>>>> I already try to install brcmfmac_sdio , with some tutorial from the >>>>>> internet, but it didn't work... >>>>>> actually, I see under /sys/bus/sdio/drivers brcmfmac_sdio ... >>>>>> >>>>>> In that directory, I see a directory mmc1:0001:2 >>>>>> under device I have 0xa94d >>>>>> >>>>>> I completly lost, maybe you understand that information, sorry.. >>>>> >>>>> >>>>> I do. The fact that you see a subdirectory mmc1:0001:2 in >>>>> /sys/bus/sdio/drivers/brcmfmac_sdio means that the driver was probed for >>>>> this device. Now would be a good time to share your (friends') kernel log, >>>>> but my guess is you are either missing firmware or nvram data or both for >>>>> this device. >>> I ve attatched the kernel.log here https://drive.google.com/file/d/0B8gm4mLCCQAgMmNlVVFSYmNjOGs/view?usp=sharing >>> In dmsg I see following linked with the brc driver : >>> dmesg | grep brc >>> [ 7.987661] brcmf_sdio_drivestrengthinit: No SDIO Drive strength >>> init done for chip 43340 rev 2 pmurev 20 >>> [ 7.993487] usbcore: registered new interface driver brcmfmac >>> [ 7.996318] brcmfmac_sdio mmc1:0001:1: Direct firmware load for >>> brcm/brcmfmac43340-sdio.bin failed with error -2 >>> [ 9.011572] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 >>> [ 10.037365] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 >>>> >>>> It could also mean driver was loaded manually. So please also make >>>> sure the friend uses kernel 4.0 or newer. >>> Kernel : 4.0.0 #3 SMP PREEMPT Wed Apr 22 17:52:53 MSK 2015 >>> Distro: >>> Distributor ID: T100 Ubuntu 15.04 >>> Description: Ubuntu 15.04 >>> Release: 15.04 >>> Codename: vivid >>> I ve installed it from the magic stick here >>> https://plus.google.com/communities/117853703024346186936 > > The driver complains about missing firmware and Ubuntu 15.04 does not > contain it. > > Please place this file > https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/brcmfmac43340-sdio.bin > > to /lib/firmware/brcm/brcmfmac43340-sdio.bin > > Hauke Before that, the system was complaining about brcm/brcmfmac43340-sdio.bin, and now about brcm/brcmfmac43340-sdio.txt but errors are similar... 43340 rev 2 pmurev 20 May 17 15:53:48 scheissasus kernel: [ 7.372974] usbcore: registered new interface driver brcmfmac May 17 15:53:48 scheissasus kernel: [ 7.374344] brcmfmac_sdio mmc1:0001:1: Direct firmware load for brcm/brcmfmac43340-sdio.bin failed with error -2 May 17 15:53:48 scheissasus kernel: [ 8.383270] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 May 17 15:53:50 scheissasus kernel: [ 11.401582] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 May 17 15:59:23 scheissasus kernel: [ 7.496560] brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43340 rev 2 pmurev 20 May 17 15:59:23 scheissasus kernel: [ 7.500086] usbcore: registered new interface driver brcmfmac May 17 15:59:23 scheissasus kernel: [ 7.506911] brcmfmac_sdio mmc1:0001:1: Direct firmware load for brcm/brcmfmac43340-sdio.txt failed with error -2 May 17 15:59:23 scheissasus kernel: [ 8.514107] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 May 17 15:59:23 scheissasus kernel: [ 9.531340] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50