Return-path: Received: from mail-wi0-f172.google.com ([209.85.212.172]:36656 "EHLO mail-wi0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751110AbbEFN2g (ORCPT ); Wed, 6 May 2015 09:28:36 -0400 Received: by wizk4 with SMTP id k4so202375039wiz.1 for ; Wed, 06 May 2015 06:28:35 -0700 (PDT) From: Arik Nemtsov To: Cc: Johannes Berg Subject: [PATCH v2] cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA Date: Wed, 6 May 2015 16:28:31 +0300 Message-Id: <1430918911-14715-1-git-send-email-arik@wizery.com> (sfid-20150506_152840_617249_5E1E6643) Sender: linux-wireless-owner@vger.kernel.org List-ID: The GO_CONCURRENT regulatory definition can be extended to station interfaces requesting to IR as part of TDLS off-channel operations. Rename the GO_CONCURRENT flag to IR_CONCURRENT and allow the added use-case. Change internal users of GO_CONCURRENT to use the new definition. Signed-off-by: Arik Nemtsov Reviewed-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 2 +- include/net/cfg80211.h | 4 +-- include/uapi/linux/nl80211.h | 28 +++++++++++--------- net/wireless/chan.c | 38 ++++++++++++++++------------ net/wireless/nl80211.c | 4 +-- net/wireless/reg.c | 4 +-- 6 files changed, 45 insertions(+), 35 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index 83903a5..0b5a81d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -248,7 +248,7 @@ static u32 iwl_get_channel_flags(u8 ch_num, int ch_idx, bool is_5ghz, */ if ((nvm_flags & NVM_CHANNEL_GO_CONCURRENT) && (flags & IEEE80211_CHAN_NO_IR)) - flags |= IEEE80211_CHAN_GO_CONCURRENT; + flags |= IEEE80211_CHAN_IR_CONCURRENT; return flags; } diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f8d6813..d63ecec 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -111,7 +111,7 @@ enum ieee80211_band { * This may be due to the driver or due to regulatory bandwidth * restrictions. * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY - * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT + * @IEEE80211_CHAN_IR_CONCURRENT: see %NL80211_FREQUENCY_ATTR_IR_CONCURRENT * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted * on this channel. * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted @@ -129,7 +129,7 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_80MHZ = 1<<7, IEEE80211_CHAN_NO_160MHZ = 1<<8, IEEE80211_CHAN_INDOOR_ONLY = 1<<9, - IEEE80211_CHAN_GO_CONCURRENT = 1<<10, + IEEE80211_CHAN_IR_CONCURRENT = 1<<10, IEEE80211_CHAN_NO_20MHZ = 1<<11, IEEE80211_CHAN_NO_10MHZ = 1<<12, }; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 241220c..c0ab6b0 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2620,16 +2620,17 @@ enum nl80211_band_attr { * an indoor surroundings, i.e., it is connected to AC power (and not * through portable DC inverters) or is under the control of a master * that is acting as an AP and is connected to AC power. - * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this + * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this * channel if it's connected concurrently to a BSS on the same channel on * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz - * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a - * channel that has the GO_CONCURRENT attribute set can be done when there - * is a clear assessment that the device is operating under the guidance of - * an authorized master, i.e., setting up a GO while the device is also - * connected to an AP with DFS and radar detection on the UNII band (it is - * up to user-space, i.e., wpa_supplicant to perform the required - * verifications) + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS + * off-channel on a channel that has the IR_CONCURRENT attribute set can be + * done when there is a clear assessment that the device is operating under + * the guidance of an authorized master, i.e., setting up a GO or TDLS + * off-channel while the device is also connected to an AP with DFS and + * radar detection on the UNII band (it is up to user-space, i.e., + * wpa_supplicant to perform the required verifications). Using this + * attribute for IR is disallowed for master interfaces (IBSS, AP). * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed @@ -2641,7 +2642,7 @@ enum nl80211_band_attr { * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 * for more information on the FCC description of the relaxations allowed * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and - * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. + * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -2659,7 +2660,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_160MHZ, NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, NL80211_FREQUENCY_ATTR_INDOOR_ONLY, - NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_IR_CONCURRENT, NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, @@ -2672,6 +2673,8 @@ enum nl80211_frequency_attr { #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ + NL80211_FREQUENCY_ATTR_IR_CONCURRENT /** * enum nl80211_bitrate_attr - bitrate attributes @@ -2830,7 +2833,7 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. - * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT + * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed @@ -2847,7 +2850,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_IR = 1<<7, __NL80211_RRF_NO_IBSS = 1<<8, NL80211_RRF_AUTO_BW = 1<<11, - NL80211_RRF_GO_CONCURRENT = 1<<12, + NL80211_RRF_IR_CONCURRENT = 1<<12, NL80211_RRF_NO_HT40MINUS = 1<<13, NL80211_RRF_NO_HT40PLUS = 1<<14, NL80211_RRF_NO_80MHZ = 1<<15, @@ -2859,6 +2862,7 @@ enum nl80211_reg_rule_flags { #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ NL80211_RRF_NO_HT40PLUS) +#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT /* For backport compatibility with older userspace */ #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 5bcffdb..915b328 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -698,19 +698,20 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, EXPORT_SYMBOL(cfg80211_chandef_usable); /* - * For GO only, check if the channel can be used under permissive conditions - * mandated by the some regulatory bodies, i.e., the channel is marked with - * IEEE80211_CHAN_GO_CONCURRENT and there is an additional station interface + * Check if the channel can be used under permissive conditions mandated by + * some regulatory bodies, i.e., the channel is marked with + * IEEE80211_CHAN_IR_CONCURRENT and there is an additional station interface * associated to an AP on the same channel or on the same UNII band * (assuming that the AP is an authorized master). - * In addition allow the GO to operate on a channel on which indoor operation is + * In addition allow operation on a channel on which indoor operation is * allowed, iff we are currently operating in an indoor environment. */ -static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev, +static bool cfg80211_ir_permissive_chan(struct wiphy *wiphy, + enum nl80211_iftype iftype, struct ieee80211_channel *chan) { struct wireless_dev *wdev; - struct wiphy *wiphy = wiphy_idx_to_wiphy(rdev->wiphy_idx); + struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); ASSERT_RTNL(); @@ -718,16 +719,22 @@ static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev, !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR)) return false; + /* only valid for GO and TDLS off-channel (station/p2p-CL) */ + if (iftype != NL80211_IFTYPE_P2P_GO && + iftype != NL80211_IFTYPE_STATION && + iftype != NL80211_IFTYPE_P2P_CLIENT) + return false; + if (regulatory_indoor_allowed() && (chan->flags & IEEE80211_CHAN_INDOOR_ONLY)) return true; - if (!(chan->flags & IEEE80211_CHAN_GO_CONCURRENT)) + if (!(chan->flags & IEEE80211_CHAN_IR_CONCURRENT)) return false; /* * Generally, it is possible to rely on another device/driver to allow - * the GO concurrent relaxation, however, since the device can further + * the IR concurrent relaxation, however, since the device can further * enforce the relaxation (by doing a similar verifications as this), * and thus fail the GO instantiation, consider only the interfaces of * the current registered device. @@ -748,7 +755,8 @@ static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev, * GO_CONCURRENT is disconnected now. But then we must make sure * we're not outdoor on an indoor-only channel. */ - if (wdev->iftype == NL80211_IFTYPE_P2P_GO && + if (iftype == NL80211_IFTYPE_P2P_GO && + wdev->iftype == NL80211_IFTYPE_P2P_GO && wdev->beacon_interval && !(chan->flags & IEEE80211_CHAN_INDOOR_ONLY)) other_chan = wdev->chandef.chan; @@ -793,7 +801,6 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, enum nl80211_iftype iftype) { - struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); bool res; u32 prohibited_flags = IEEE80211_CHAN_DISABLED | IEEE80211_CHAN_RADAR; @@ -801,13 +808,12 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype); /* - * Under certain conditions suggested by the some regulatory bodies - * a GO can operate on channels marked with IEEE80211_NO_IR - * so set this flag only if such relaxations are not enabled and - * the conditions are not met. + * Under certain conditions suggested by some regulatory bodies a + * GO/STA can IR on channels marked with IEEE80211_NO_IR. Set this flag + * only if such relaxations are not enabled and the conditions are not + * met. */ - if (iftype != NL80211_IFTYPE_P2P_GO || - !cfg80211_go_permissive_chan(rdev, chandef->chan)) + if (!cfg80211_ir_permissive_chan(wiphy, iftype, chandef->chan)) prohibited_flags |= IEEE80211_CHAN_NO_IR; if (cfg80211_chandef_dfs_required(wiphy, chandef, iftype) > 0 && diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 8a33bba..c264eff 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -639,8 +639,8 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if ((chan->flags & IEEE80211_CHAN_INDOOR_ONLY) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_INDOOR_ONLY)) goto nla_put_failure; - if ((chan->flags & IEEE80211_CHAN_GO_CONCURRENT) && - nla_put_flag(msg, NL80211_FREQUENCY_ATTR_GO_CONCURRENT)) + if ((chan->flags & IEEE80211_CHAN_IR_CONCURRENT) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_IR_CONCURRENT)) goto nla_put_failure; if ((chan->flags & IEEE80211_CHAN_NO_20MHZ) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_20MHZ)) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 0e347f8..d359e06 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -989,8 +989,8 @@ static u32 map_regdom_flags(u32 rd_flags) channel_flags |= IEEE80211_CHAN_NO_OFDM; if (rd_flags & NL80211_RRF_NO_OUTDOOR) channel_flags |= IEEE80211_CHAN_INDOOR_ONLY; - if (rd_flags & NL80211_RRF_GO_CONCURRENT) - channel_flags |= IEEE80211_CHAN_GO_CONCURRENT; + if (rd_flags & NL80211_RRF_IR_CONCURRENT) + channel_flags |= IEEE80211_CHAN_IR_CONCURRENT; if (rd_flags & NL80211_RRF_NO_HT40MINUS) channel_flags |= IEEE80211_CHAN_NO_HT40MINUS; if (rd_flags & NL80211_RRF_NO_HT40PLUS) -- 2.1.0