Return-path: Received: from mail-pd0-f173.google.com ([209.85.192.173]:34014 "EHLO mail-pd0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752856AbbEQNAD convert rfc822-to-8bit (ORCPT ); Sun, 17 May 2015 09:00:03 -0400 Received: by pdbnk13 with SMTP id nk13so10631219pdb.1 for ; Sun, 17 May 2015 06:00:03 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: References: <5557556C.2080107@lwfinger.net> <5557B396.9080300@gmail.com> Date: Sun, 17 May 2015 15:00:03 +0200 Message-ID: (sfid-20150517_150007_483715_6AA814AD) Subject: Re: lspci not working From: Schmirr Wurst To: Arend van Spriel , =?UTF-8?Q?S=C3=A9bastien_Brennion?= Cc: =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= , Larry Finger , b43-dev , linux-wireless Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: 2015-05-17 14:57 GMT+02:00 Schmirr Wurst : > I'm not familiar with inline answers and mailing list, tried to put > some order in my answer + log file > > 2015-05-17 13:18 GMT+02:00 Rafał Miłecki : >> On 17 May 2015 at 12:23, Arend van Spriel wrote: >>> On 05/17/15 02:21, Schmirr Wurst wrote: >>>> I tried as suggested to had a look at >>>> /sys/bus/sdio/devices, but the only devices around there a 3 >>>> mmc1:0001:1 to :3, I guess it is something else... >>>> >>>> I already try to install brcmfmac_sdio , with some tutorial from the >>>> internet, but it didn't work... >>>> actually, I see under /sys/bus/sdio/drivers brcmfmac_sdio ... >>>> >>>> In that directory, I see a directory mmc1:0001:2 >>>> under device I have 0xa94d >>>> >>>> I completly lost, maybe you understand that information, sorry.. >>> >>> >>> I do. The fact that you see a subdirectory mmc1:0001:2 in >>> /sys/bus/sdio/drivers/brcmfmac_sdio means that the driver was probed for >>> this device. Now would be a good time to share your (friends') kernel log, >>> but my guess is you are either missing firmware or nvram data or both for >>> this device. > I ve attatched the kernel.log here https://drive.google.com/file/d/0B8gm4mLCCQAgMmNlVVFSYmNjOGs/view?usp=sharing > In dmsg I see following linked with the brc driver : > dmesg | grep brc > [ 7.987661] brcmf_sdio_drivestrengthinit: No SDIO Drive strength > init done for chip 43340 rev 2 pmurev 20 > [ 7.993487] usbcore: registered new interface driver brcmfmac > [ 7.996318] brcmfmac_sdio mmc1:0001:1: Direct firmware load for > brcm/brcmfmac43340-sdio.bin failed with error -2 > [ 9.011572] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 > [ 10.037365] brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 >> >> It could also mean driver was loaded manually. So please also make >> sure the friend uses kernel 4.0 or newer. > Kernel : 4.0.0 #3 SMP PREEMPT Wed Apr 22 17:52:53 MSK 2015 > Distro: > Distributor ID: T100 Ubuntu 15.04 > Description: Ubuntu 15.04 > Release: 15.04 > Codename: vivid > I ve installed it from the magic stick here > https://plus.google.com/communities/117853703024346186936