Return-path: Received: from mail2.candelatech.com ([208.74.158.173]:48271 "EHLO mail2.candelatech.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751911AbbFKNZq (ORCPT ); Thu, 11 Jun 2015 09:25:46 -0400 Message-ID: <55798C58.9020600@candelatech.com> (sfid-20150611_152549_955456_3F76AD17) Date: Thu, 11 Jun 2015 06:25:44 -0700 From: Ben Greear MIME-Version: 1.0 To: Janusz Dziedzic , Sangwoo Moon CC: Janusz Dziedzic , linux-wireless , ath10k Subject: Re: [PATCH v2] ath10k: enable VHT for IBSS References: <1433913284-18444-1-git-send-email-janusz.dziedzic@tieto.com> <911fece613ad9dd7975e53ac808fd495@lanada.kaist.ac.kr> <4e93e535617121ba802385eef13b9ef7@lanada.kaist.ac.kr> In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 06/10/2015 11:33 PM, Janusz Dziedzic wrote: > 2015-06-11 8:32 GMT+02:00 Sangwoo Moon : >> Hello, >> >> I have successfully installed the latest version of ath10k driver from >> backports. >> >> However, I have some difficulties on configuring wpa_supplicant for IBSS VHT >> mode. >> Looked at wpa_supplicant configuration file, but I couldn't found any option >> related to explicit setting VHT (though I've found disable_vht instead) >> >> Sorry for annoying questions, but can you help this out? >> At least you could let me know your configuration of wpa_supplicant. >> > supplicant by default setup wildest BW, no special parameter required > for IBSS VHT > > network = { > ssid="ibss" > mode=1 > key_mgmt=NONE > frequency=5180 > } > > Just use latest version of wpa_supplicant. > next check you have 80MHz BW > iw wlan0 info Make sure you compile supplicant with this option enabled: CONFIG_IBSS_RSN=y I think only particular firmware versions are doing to do IBSS as well. Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com