Return-path: Received: from mail2.candelatech.com ([208.74.158.173]:48227 "EHLO mail2.candelatech.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751248AbbFKNXS (ORCPT ); Thu, 11 Jun 2015 09:23:18 -0400 Message-ID: <55798BC5.3030800@candelatech.com> (sfid-20150611_152321_846540_9EF8EF6C) Date: Thu, 11 Jun 2015 06:23:17 -0700 From: Ben Greear MIME-Version: 1.0 To: Michal Kazior CC: ath10k , "linux-wireless@vger.kernel.org" Subject: Re: Anyone tried ath10k AP with 40Mhz operation? References: <55789EBF.2060501@candelatech.com> In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 06/10/2015 11:54 PM, Michal Kazior wrote: > On 10 June 2015 at 22:31, Ben Greear wrote: >> I'm trying this hostapd config file. Beacons seem OK, and station >> associates. Station puts DHCP Discover on the air (using 20Mhz according >> to wireshark). AP reads this, and thinks it is sending a DHCP response back, >> but sniffer never shows DHCP response on the air. > > Is the MSDU carrying DHCP resp completed with "ok" status? Or is it > maybe no-ack or discarded? I'll check, and also try stock firmware to see if that makes a difference. >> Kernel is 4.0.4+, ath10k firmware is CT firmware, 10.1.467 based. >> >> I am curious if anyone else has tried to do this? >> >> Thanks, >> Ben >> >> interface=vap50 >> driver=nl80211 >> logger_syslog=-1 >> logger_syslog_level=2 >> logger_stdout=-1 >> logger_stdout_level=2 >> ctrl_interface=/var/run/hostapd >> ctrl_interface_group=0 >> ssid=ben-ota-2a > [...] > > Works for me on c7b39fdeb479a7956a3c41638d527196ce295fdd > (github.com/kvalo/ath) with > AP: qca988x hw2.0, 10.1.467.2-1 > STA: qca6174 hw2.2 (its a 2x2), What NIC model is your qca6174? In case I cannot get my setup to work, it would be nice to be able to be able to duplicate your configuration... Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com