Return-path: Received: from comal.ext.ti.com ([198.47.26.152]:51723 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751629AbbG3TvT (ORCPT ); Thu, 30 Jul 2015 15:51:19 -0400 From: Yaniv Machani To: CC: , Eliad Peller , Eyal Reizer Subject: [PATCH 2/2] ARM: dts: am335x-evm: add wilink8 bluetooth support Date: Thu, 30 Jul 2015 22:39:29 +0300 Message-ID: <1438285169-338-2-git-send-email-yanivma@ti.com> (sfid-20150730_215122_129230_80660E9A) In-Reply-To: <1438285169-338-1-git-send-email-yanivma@ti.com> References: <1438285169-338-1-git-send-email-yanivma@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Eliad Peller uart1 is used for shared transport (used for multiplexing bluetooth and nfc data). add the needed muxes and definitions. Signed-off-by: Eliad Peller Signed-off-by: Eyal Reizer --- arch/arm/boot/dts/am335x-evm.dts | 29 +++++++++++++++++++++++++++++ 1 files changed, 29 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index b690674..a0a3f72 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -135,6 +135,18 @@ }; }; + kim { + compatible = "kim"; + nshutdown_gpio = <117>; /* Bank3, pin21 */ + dev_name = "/dev/ttyO1"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; + sound { compatible = "ti,da830-evm-audio"; ti,model = "AM335x-EVM"; @@ -191,6 +203,16 @@ >; }; + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ @@ -359,6 +381,13 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; -- 1.7.9