Return-path: Received: from sabertooth01.qualcomm.com ([65.197.215.72]:60734 "EHLO sabertooth01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751773AbbHMLVt (ORCPT ); Thu, 13 Aug 2015 07:21:49 -0400 From: Kalle Valo To: Vivek Natarajan CC: , Subject: Re: [PATCH 1/2] ath10k: Support different txbf configuration schemes References: <1438665312-2768-1-git-send-email-nataraja@qti.qualcomm.com> Date: Thu, 13 Aug 2015 14:21:38 +0300 In-Reply-To: <1438665312-2768-1-git-send-email-nataraja@qti.qualcomm.com> (Vivek Natarajan's message of "Tue, 4 Aug 2015 10:45:11 +0530") Message-ID: <87a8tvo2m5.fsf@kamboji.qca.qualcomm.com> (sfid-20150813_132152_159608_F75ADF5A) MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: linux-wireless-owner@vger.kernel.org List-ID: Vivek Natarajan writes: > qca61x4 uses the vdev param as a sole sufficient configuration > for txbf while qca99x0 enables txbf during peer assoc by > combining the vdev param value with peer assoc's vht capabilities > > This patch gets the appropriate txbf configuration scheme > before passing the wmi command to enable the same in the firmware. > > Signed-off-by: Vivek Natarajan Thanks, both patches applied. -- Kalle Valo