Return-path: Received: from sabertooth01.qualcomm.com ([65.197.215.72]:35542 "EHLO sabertooth01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752575AbbIAC4W (ORCPT ); Mon, 31 Aug 2015 22:56:22 -0400 From: Cc: , , , Miaoqing Pan To: Subject: [PATCH] ath9k: enable hw manual peak calibration for QCA9561 Date: Tue, 1 Sep 2015 10:56:09 +0800 Message-ID: <1441076169-13398-1-git-send-email-miaoqing@qca.qualcomm.com> (sfid-20150901_045625_713077_08241E7D) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Miaoqing Pan This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/ 2015-August/034979.html. As the peak detect calibration is set incorrectly. Signed-off-by: Miaoqing Pan --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 174442b..0c39199 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -1249,7 +1249,8 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g) REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain), AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0); - if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) { + if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) || + AR_SREV_9561(ah)) { if (is_2g) REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain), AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR, @@ -1640,7 +1641,8 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah, skip_tx_iqcal: if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { - if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) { + if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) || + AR_SREV_9561(ah)) { for (i = 0; i < AR9300_MAX_CHAINS; i++) { if (!(ah->rxchainmask & (1 << i))) continue; -- 1.9.1