Return-path: Received: from mout.kundenserver.de ([212.227.17.24]:54835 "EHLO mout.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753286AbbJTWsL (ORCPT ); Tue, 20 Oct 2015 18:48:11 -0400 From: Arnd Bergmann To: linux-wireless@vger.kernel.org Cc: Rachel Kim , devel@driverdev.osuosl.org, Chris Park , gregkh@linuxfoundation.org, Stanislav Kholmanskikh , Johnny Kim , linux-kernel@vger.kernel.org, Tony Cho , Glen Lee , Leo Kim , Arnd Bergmann Subject: [PATCH 06/19] staging/wilc1000: avoid static definitions in header Date: Wed, 21 Oct 2015 00:47:25 +0200 Message-Id: <1445381258-1455986-7-git-send-email-arnd@arndb.de> (sfid-20151021_005621_232032_FF15B9B4) In-Reply-To: <1445381258-1455986-1-git-send-email-arnd@arndb.de> References: <1445381258-1455986-1-git-send-email-arnd@arndb.de> Sender: linux-wireless-owner@vger.kernel.org List-ID: The wilc_wfi_cfgoperations.h header defines the ieee80211_txrx_stypes and cipher_suites variables that are only used in wilc_wfi_cfgoperations.c and should not be shared in a header file. This moves over all that data into the .c file, and also moves all the macro definitions from the file that are also not needed here. Signed-off-by: Arnd Bergmann --- drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 84 +++++++++++++++++++++++ drivers/staging/wilc1000/wilc_wfi_cfgoperations.h | 83 ---------------------- 2 files changed, 84 insertions(+), 83 deletions(-) diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index 0ed05aafa5bf..702c40c1df4b 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -17,6 +17,90 @@ #include "host_interface.h" #include +/* The following macros describe the bitfield map used by the firmware to determine its 11i mode */ +#define NO_ENCRYPT 0 +#define ENCRYPT_ENABLED BIT(0) +#define WEP BIT(1) +#define WEP_EXTENDED BIT(2) +#define WPA BIT(3) +#define WPA2 BIT(4) +#define AES BIT(5) +#define TKIP BIT(6) + +/*Public action frame index IDs*/ +#define FRAME_TYPE_ID 0 +#define ACTION_CAT_ID 24 +#define ACTION_SUBTYPE_ID 25 +#define P2P_PUB_ACTION_SUBTYPE 30 + +/*Public action frame Attribute IDs*/ +#define ACTION_FRAME 0xd0 +#define GO_INTENT_ATTR_ID 0x04 +#define CHANLIST_ATTR_ID 0x0b +#define OPERCHAN_ATTR_ID 0x11 +#define PUB_ACTION_ATTR_ID 0x04 +#define P2PELEM_ATTR_ID 0xdd + +/*Public action subtype values*/ +#define GO_NEG_REQ 0x00 +#define GO_NEG_RSP 0x01 +#define GO_NEG_CONF 0x02 +#define P2P_INV_REQ 0x03 +#define P2P_INV_RSP 0x04 +#define PUBLIC_ACT_VENDORSPEC 0x09 +#define GAS_INTIAL_REQ 0x0a +#define GAS_INTIAL_RSP 0x0b + +#define INVALID_CHANNEL 0 + +#define nl80211_SCAN_RESULT_EXPIRE (3 * HZ) +#define SCAN_RESULT_EXPIRE (40 * HZ) + +static const u32 cipher_suites[] = { + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, + WLAN_CIPHER_SUITE_AES_CMAC, +}; + +static const struct ieee80211_txrx_stypes + wilc_wfi_cfg80211_mgmt_types[NUM_NL80211_IFTYPES] = { + [NL80211_IFTYPE_STATION] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, + [NL80211_IFTYPE_AP] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4) + }, + [NL80211_IFTYPE_P2P_CLIENT] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) + } +}; + +/* Time to stay on the channel */ +#define WILC_WFI_DWELL_PASSIVE 100 +#define WILC_WFI_DWELL_ACTIVE 40 + +#define TCP_ACK_FILTER_LINK_SPEED_THRESH 54 +#define DEFAULT_LINK_SPEED 72 + + #define IS_MANAGMEMENT 0x100 #define IS_MANAGMEMENT_CALLBACK 0x080 #define IS_MGMT_STATUS_SUCCES 0x040 diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.h b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.h index ae2aaea508db..158d98c0eb87 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.h +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.h @@ -10,86 +10,6 @@ #define NM_WFI_CFGOPERATIONS #include "wilc_wfi_netdevice.h" -/* The following macros describe the bitfield map used by the firmware to determine its 11i mode */ -#define NO_ENCRYPT 0 -#define ENCRYPT_ENABLED BIT(0) -#define WEP BIT(1) -#define WEP_EXTENDED BIT(2) -#define WPA BIT(3) -#define WPA2 BIT(4) -#define AES BIT(5) -#define TKIP BIT(6) - -/*Public action frame index IDs*/ -#define FRAME_TYPE_ID 0 -#define ACTION_CAT_ID 24 -#define ACTION_SUBTYPE_ID 25 -#define P2P_PUB_ACTION_SUBTYPE 30 - -/*Public action frame Attribute IDs*/ -#define ACTION_FRAME 0xd0 -#define GO_INTENT_ATTR_ID 0x04 -#define CHANLIST_ATTR_ID 0x0b -#define OPERCHAN_ATTR_ID 0x11 -#define PUB_ACTION_ATTR_ID 0x04 -#define P2PELEM_ATTR_ID 0xdd - -/*Public action subtype values*/ -#define GO_NEG_REQ 0x00 -#define GO_NEG_RSP 0x01 -#define GO_NEG_CONF 0x02 -#define P2P_INV_REQ 0x03 -#define P2P_INV_RSP 0x04 -#define PUBLIC_ACT_VENDORSPEC 0x09 -#define GAS_INTIAL_REQ 0x0a -#define GAS_INTIAL_RSP 0x0b - -#define INVALID_CHANNEL 0 - -#define nl80211_SCAN_RESULT_EXPIRE (3 * HZ) -#define SCAN_RESULT_EXPIRE (40 * HZ) - -static const u32 cipher_suites[] = { - WLAN_CIPHER_SUITE_WEP40, - WLAN_CIPHER_SUITE_WEP104, - WLAN_CIPHER_SUITE_TKIP, - WLAN_CIPHER_SUITE_CCMP, - WLAN_CIPHER_SUITE_AES_CMAC, -}; - -static const struct ieee80211_txrx_stypes - wilc_wfi_cfg80211_mgmt_types[NUM_NL80211_IFTYPES] = { - [NL80211_IFTYPE_STATION] = { - .tx = 0xffff, - .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | - BIT(IEEE80211_STYPE_PROBE_REQ >> 4) - }, - [NL80211_IFTYPE_AP] = { - .tx = 0xffff, - .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | - BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | - BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | - BIT(IEEE80211_STYPE_DISASSOC >> 4) | - BIT(IEEE80211_STYPE_AUTH >> 4) | - BIT(IEEE80211_STYPE_DEAUTH >> 4) | - BIT(IEEE80211_STYPE_ACTION >> 4) - }, - [NL80211_IFTYPE_P2P_CLIENT] = { - .tx = 0xffff, - .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | - BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | - BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | - BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | - BIT(IEEE80211_STYPE_DISASSOC >> 4) | - BIT(IEEE80211_STYPE_AUTH >> 4) | - BIT(IEEE80211_STYPE_DEAUTH >> 4) - } -}; - -/* Time to stay on the channel */ -#define WILC_WFI_DWELL_PASSIVE 100 -#define WILC_WFI_DWELL_ACTIVE 40 - struct wireless_dev *wilc_create_wiphy(struct net_device *net); void wilc_free_wiphy(struct net_device *net); int WILC_WFI_update_stats(struct wiphy *wiphy, u32 pktlen, u8 changed); @@ -101,7 +21,4 @@ struct net_device *WILC_WFI_init_mon_interface(const char *name, struct net_devi void wilc_mgmt_frame_register(struct wiphy *wiphy, struct wireless_dev *wdev, u16 frame_type, bool reg); -#define TCP_ACK_FILTER_LINK_SPEED_THRESH 54 -#define DEFAULT_LINK_SPEED 72 - #endif -- 2.1.0.rc2