Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]:34893 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933139AbbKROqp (ORCPT ); Wed, 18 Nov 2015 09:46:45 -0500 From: Kalle Valo To: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 15/27] zd1201: move under zydas vendor directory Date: Wed, 18 Nov 2015 16:45:54 +0200 Message-Id: <1447857966-19560-16-git-send-email-kvalo@codeaurora.org> (sfid-20151118_155351_744111_704E197A) In-Reply-To: <1447857966-19560-1-git-send-email-kvalo@codeaurora.org> References: <1447857966-19560-1-git-send-email-kvalo@codeaurora.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo --- MAINTAINERS | 2 +- drivers/net/wireless/Kconfig | 20 +---------------- drivers/net/wireless/Makefile | 3 +-- drivers/net/wireless/zydas/Kconfig | 33 +++++++++++++++++++++++++++++ drivers/net/wireless/zydas/Makefile | 1 + drivers/net/wireless/{ => zydas}/zd1201.c | 0 drivers/net/wireless/{ => zydas}/zd1201.h | 0 7 files changed, 37 insertions(+), 22 deletions(-) create mode 100644 drivers/net/wireless/zydas/Kconfig create mode 100644 drivers/net/wireless/zydas/Makefile rename drivers/net/wireless/{ => zydas}/zd1201.c (100%) rename drivers/net/wireless/{ => zydas}/zd1201.h (100%) diff --git a/MAINTAINERS b/MAINTAINERS index e622877aaab4..ec098370ef3d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11252,7 +11252,7 @@ USB ZD1201 DRIVER L: linux-wireless@vger.kernel.org W: http://linux-lc100020.sourceforge.net S: Orphan -F: drivers/net/wireless/zd1201.* +F: drivers/net/wireless/zydas/zd1201.* USB ZR364XX DRIVER M: Antoine Jacquet diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 315982a5ee73..35155e2dc8bf 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -24,6 +24,7 @@ source "drivers/net/wireless/cisco/Kconfig" source "drivers/net/wireless/intel/Kconfig" source "drivers/net/wireless/marvell/Kconfig" source "drivers/net/wireless/st/Kconfig" +source "drivers/net/wireless/zydas/Kconfig" config PCMCIA_RAYCS tristate "Aviator/Raytheon 2.4GHz wireless support" @@ -70,25 +71,6 @@ config PRISM54 When built as module you get the module prism54 -config USB_ZD1201 - tristate "USB ZD1201 based Wireless device support" - depends on CFG80211 && USB - select WIRELESS_EXT - select WEXT_PRIV - select FW_LOADER - ---help--- - Say Y if you want to use wireless LAN adapters based on the ZyDAS - ZD1201 chip. - - This driver makes the adapter appear as a normal Ethernet interface, - typically on wlan0. - - The zd1201 device requires external firmware to be loaded. - This can be found at http://linux-lc100020.sourceforge.net/ - - To compile this driver as a module, choose M here: the - module will be called zd1201. - config USB_NET_RNDIS_WLAN tristate "Wireless RNDIS USB support" depends on USB diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 9498753f596b..4ee6d6d08743 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/ obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/ obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/ obj-$(CONFIG_WLAN_VENDOR_ST) += st/ +obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/ obj-$(CONFIG_HERMES) += orinoco/ @@ -24,8 +25,6 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o -obj-$(CONFIG_USB_ZD1201) += zd1201.o - obj-$(CONFIG_RT2X00) += rt2x00/ obj-$(CONFIG_WL_MEDIATEK) += mediatek/ diff --git a/drivers/net/wireless/zydas/Kconfig b/drivers/net/wireless/zydas/Kconfig new file mode 100644 index 000000000000..6140dfa04fed --- /dev/null +++ b/drivers/net/wireless/zydas/Kconfig @@ -0,0 +1,33 @@ +config WLAN_VENDOR_ZYDAS + bool "ZyDAS devices" + default y + ---help--- + If you have a wireless card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about cards. If you say Y, you will be asked for + your specific card in the following questions. + +if WLAN_VENDOR_ZYDAS + +config USB_ZD1201 + tristate "USB ZD1201 based Wireless device support" + depends on CFG80211 && USB + select WIRELESS_EXT + select WEXT_PRIV + select FW_LOADER + ---help--- + Say Y if you want to use wireless LAN adapters based on the ZyDAS + ZD1201 chip. + + This driver makes the adapter appear as a normal Ethernet interface, + typically on wlan0. + + The zd1201 device requires external firmware to be loaded. + This can be found at http://linux-lc100020.sourceforge.net/ + + To compile this driver as a module, choose M here: the + module will be called zd1201. + +endif # WLAN_VENDOR_ZYDAS diff --git a/drivers/net/wireless/zydas/Makefile b/drivers/net/wireless/zydas/Makefile new file mode 100644 index 000000000000..37179ef890ea --- /dev/null +++ b/drivers/net/wireless/zydas/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_USB_ZD1201) += zd1201.o diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zydas/zd1201.c similarity index 100% rename from drivers/net/wireless/zd1201.c rename to drivers/net/wireless/zydas/zd1201.c diff --git a/drivers/net/wireless/zd1201.h b/drivers/net/wireless/zydas/zd1201.h similarity index 100% rename from drivers/net/wireless/zd1201.h rename to drivers/net/wireless/zydas/zd1201.h -- 1.7.9.5