Return-path: Received: from softlayer.compulab.co.il ([50.23.254.55]:40945 "EHLO compulab.co.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754817AbbL3NgF (ORCPT ); Wed, 30 Dec 2015 08:36:05 -0500 From: Uri Mashiach To: Kalle Valo , Rob Herring , Tony Lindgren Cc: Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , bcousson@baylibre.com, Igor Grinberg , Eliad Peller , devicetree@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-wireless@vger.kernel.org, Uri Mashiach Subject: [PATCH v4 2/3] wlcore/wl12xx: spi: add device tree support Date: Wed, 30 Dec 2015 15:35:32 +0200 Message-Id: <1451482533-8624-3-git-send-email-uri.mashiach@compulab.co.il> (sfid-20151230_143624_582689_54BE1703) In-Reply-To: <1451482533-8624-1-git-send-email-uri.mashiach@compulab.co.il> References: <1451482533-8624-1-git-send-email-uri.mashiach@compulab.co.il> Sender: linux-wireless-owner@vger.kernel.org List-ID: Add DT support for the wl1271 SPI WiFi. Add documentation file for the wl1271 SPI WiFi. Signed-off-by: Uri Mashiach Acked-by: Rob Herring --- v1 -> v2: update interrupt documentation. replace interrupts and interrupt-parent with interrupts-extended. IRQ parameters retrieved from spi_device instead of DT. remove redundant #ifdef CONFIG_OF v2 -> v3: Add MODULE_DEVICE_TABLE. Remove #ifdef CONFIG_OF. Make the Kconfig symbol to depend on OF. Replace irqd_get_trigger_type() with irq_get_trigger_type(). v3 -> v4: replace interrupts-extended with interrupts and interrupt-parent. (revert v2 modification). According to Rob Herring and Documentation/devicetree/bindings/interrupt-controller/interrupts.txt, interrupts-extended should only be used when a device has multiple interrupt parents. .../bindings/net/wireless/ti,wlcore,spi.txt | 36 +++++++++++++++++ drivers/net/wireless/ti/wlcore/Kconfig | 2 +- drivers/net/wireless/ti/wlcore/spi.c | 47 ++++++++++++++++++++-- 3 files changed, 80 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt new file mode 100644 index 0000000..9180724 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt @@ -0,0 +1,36 @@ +* Texas Instruments wl1271 wireless lan controller + +The wl1271 chip can be connected via SPI or via SDIO. This +document describes the binding for the SPI connected chip. + +Required properties: +- compatible : Should be "ti,wl1271" +- reg : Chip select address of device +- spi-max-frequency : Maximum SPI clocking speed of device in Hz +- ref-clock-frequency : Reference clock frequency +- interrupt-parent, interrupts : + Should contain parameters for 1 interrupt line. + Interrupt parameters: parent, line number, type. +- vwlan-supply : Point the node of the regulator that powers/enable the wl1271 chip + +Optional properties: +- clock-xtal : boolean, clock is generated from XTAL + +- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt + for optional SPI connection related properties, + +Examples: + +&spi1 { + wl1271@1 { + compatible = "ti,wl1271"; + + reg = <1>; + spi-max-frequency = <48000000>; + clock-xtal; + ref-clock-frequency = <38400000>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + vwlan-supply = <&vwlan_fixed>; + }; +}; diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index 7c09954..5918080 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -13,7 +13,7 @@ config WLCORE config WLCORE_SPI tristate "TI wlcore SPI support" - depends on WLCORE && SPI_MASTER + depends on WLCORE && SPI_MASTER && OF select CRC7 ---help--- This module adds support for the SPI interface of adapters using diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index dec1512..020ac1a 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "wlcore.h" @@ -357,6 +358,39 @@ static struct wl1271_if_operations spi_ops = { .set_block_size = NULL, }; +static const struct of_device_id wlcore_spi_of_match_table[] = { + { .compatible = "ti,wl1271" }, + { } +}; +MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table); + +/** + * wlcore_probe_of - DT node parsing. + * @spi: SPI slave device parameters. + * @res: resource parameters. + * @glue: wl12xx SPI bus to slave device glue parameters. + * @pdev_data: wlcore device parameters + */ +static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue, + struct wlcore_platdev_data *pdev_data) +{ + struct device_node *dt_node = spi->dev.of_node; + int ret; + + if (of_find_property(dt_node, "clock-xtal", NULL)) + pdev_data->ref_clock_xtal = true; + + ret = of_property_read_u32(dt_node, "ref-clock-frequency", + &pdev_data->ref_clock_freq); + if (IS_ERR_VALUE(ret)) { + dev_err(glue->dev, + "can't get reference clock frequency (%d)\n", ret); + return ret; + } + + return 0; +} + static int wl1271_probe(struct spi_device *spi) { struct wl12xx_spi_glue *glue; @@ -366,8 +400,6 @@ static int wl1271_probe(struct spi_device *spi) memset(&pdev_data, 0x00, sizeof(pdev_data)); - /* TODO: add DT parsing when needed */ - pdev_data.if_ops = &spi_ops; glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL); @@ -392,6 +424,13 @@ static int wl1271_probe(struct spi_device *spi) return PTR_ERR(glue->reg); } + ret = wlcore_probe_of(spi, glue, &pdev_data); + if (IS_ERR_VALUE(ret)) { + dev_err(glue->dev, + "can't get device tree parameters (%d)\n", ret); + return ret; + } + ret = spi_setup(spi); if (ret < 0) { dev_err(glue->dev, "spi_setup failed\n"); @@ -409,7 +448,7 @@ static int wl1271_probe(struct spi_device *spi) memset(res, 0x00, sizeof(res)); res[0].start = spi->irq; - res[0].flags = IORESOURCE_IRQ; + res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq); res[0].name = "irq"; ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); @@ -447,10 +486,10 @@ static int wl1271_remove(struct spi_device *spi) return 0; } - static struct spi_driver wl1271_spi_driver = { .driver = { .name = "wl1271_spi", + .of_match_table = of_match_ptr(wlcore_spi_of_match_table), }, .probe = wl1271_probe, -- 2.5.0