Return-path: Received: from softlayer.compulab.co.il ([50.23.254.55]:35305 "EHLO compulab.co.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753389AbbLXRYV (ORCPT ); Thu, 24 Dec 2015 12:24:21 -0500 Subject: Re: [PATCH v2 2/3] wlcore/wl12xx: spi: add device tree support To: Grygorii Strashko , Kalle Valo , Rob Herring , Tony Lindgren References: <1450971335-15961-1-git-send-email-uri.mashiach@compulab.co.il> <1450971335-15961-3-git-send-email-uri.mashiach@compulab.co.il> <567C1E19.1090500@ti.com> Cc: Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , bcousson@baylibre.com, Igor Grinberg , Eliad Peller , devicetree@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-wireless@vger.kernel.org From: Uri Mashiach Message-ID: <567C2A41.1030207@compulab.co.il> (sfid-20151224_182425_910857_1E3D7214) Date: Thu, 24 Dec 2015 19:24:17 +0200 MIME-Version: 1.0 In-Reply-To: <567C1E19.1090500@ti.com> Content-Type: text/plain; charset=windows-1252; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Grygorii, On 12/24/2015 06:32 PM, Grygorii Strashko wrote: > On 12/24/2015 05:35 PM, Uri Mashiach wrote: >> Add DT support for the wl1271 SPI WiFi. >> >> Add documentation file for the wl1271 SPI WiFi. >> >> Signed-off-by: Uri Mashiach >> Acked-by: Igor Grinberg >> --- >> v1 -> v2: update interrupt documentation. >> replace interrupts and interrupt-parent with interrupts-extended. >> IRQ parameters retrieved from spi_device instead of DT. >> remove redundant #ifdef CONFIG_OF >> >> .../bindings/net/wireless/ti,wlcore,spi.txt | 34 +++++++++++++ >> drivers/net/wireless/ti/wlcore/spi.c | 55 ++++++++++++++++++++-- >> 2 files changed, 85 insertions(+), 4 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt >> >> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt >> new file mode 100644 >> index 0000000..502c27e >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt >> @@ -0,0 +1,34 @@ >> +* Texas Instruments wl1271 wireless lan controller >> + >> +The wl1271 chip can be connected via SPI or via SDIO. This >> +document describes the binding for the SPI connected chip. >> + >> +Required properties: >> +- compatible : Should be "ti,wl1271" >> +- reg : Chip select address of device >> +- spi-max-frequency : Maximum SPI clocking speed of device in Hz >> +- ref-clock-frequency : Reference clock frequency >> +- interrupts-extended : Should contain parameters for 1 interrupt line. >> + Interrupt parameters: parent, line number, type. >> +- vwlan-supply : Point the node of the regulator that powers/enable the wl1271 chip >> + >> +Optional properties: >> +- clock-xtal : boolean, clock is generated from XTAL >> + >> +- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt >> + for optional SPI connection related properties, >> + >> +Examples: >> + >> +&spi1 { >> + wl1271@1 { >> + compatible = "ti,wl1271"; >> + >> + reg = <1>; >> + spi-max-frequency = <48000000>; >> + clock-xtal; >> + ref-clock-frequency = <38400000>; >> + interrupts-extended = <&gpio3 8 IRQ_TYPE_LEVEL_HIGH>; >> + vwlan-supply = <&vwlan_fixed>; >> + }; >> +}; >> diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c >> index d3a4bcb..e9e8d54 100644 >> --- a/drivers/net/wireless/ti/wlcore/spi.c >> +++ b/drivers/net/wireless/ti/wlcore/spi.c >> @@ -30,6 +30,7 @@ >> #include >> #include >> #include >> +#include >> #include >> >> #include "wlcore.h" >> @@ -357,6 +358,46 @@ static struct wl1271_if_operations spi_ops = { >> .set_block_size = NULL, >> }; >> >> +#ifdef CONFIG_OF >> +static const struct of_device_id wlcore_spi_of_match_table[] = { >> + { .compatible = "ti,wl1271" }, >> + { } >> +}; >> + >> +/** >> + * wlcore_probe_of - DT node parsing. >> + * @spi: SPI slave device parameters. >> + * @res: resource parameters. >> + * @glue: wl12xx SPI bus to slave device glue parameters. >> + * @pdev_data: wlcore device parameters >> + */ >> +static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue, >> + struct wlcore_platdev_data *pdev_data) >> +{ >> + struct device_node *dt_node = spi->dev.of_node; >> + int ret; >> + >> + if (of_find_property(dt_node, "clock-xtal", NULL)) >> + pdev_data->ref_clock_xtal = true; >> + >> + ret = of_property_read_u32(dt_node, "ref-clock-frequency", >> + &pdev_data->ref_clock_freq); >> + if (IS_ERR_VALUE(ret)) { >> + dev_err(glue->dev, >> + "can't get reference clock frequency (%d)\n", ret); >> + return ret; >> + } >> + >> + return 0; >> +} >> +#else /* CONFIG_OF */ >> +static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue, >> + struct wlcore_platdev_data *pdev_data) >> +{ >> + return -ENODATA; >> +} >> +#endif /* CONFIG_OF */ > > My question for your v1 was related to all above ifdefs. > If CONFIG_OF=n is not going to be supported then all this ifdefs > can be dropped and proper dependency can be added to Kconfig instead. > Will be done in v3. >> + >> static int wl1271_probe(struct spi_device *spi) >> { >> struct wl12xx_spi_glue *glue; >> @@ -366,8 +407,6 @@ static int wl1271_probe(struct spi_device *spi) >> >> memset(&pdev_data, 0x00, sizeof(pdev_data)); >> >> - /* TODO: add DT parsing when needed */ >> - >> pdev_data.if_ops = &spi_ops; >> >> glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL); >> @@ -390,6 +429,13 @@ static int wl1271_probe(struct spi_device *spi) >> return PTR_ERR(glue->reg); >> } >> >> + ret = wlcore_probe_of(spi, glue, &pdev_data); >> + if (IS_ERR_VALUE(ret)) { >> + dev_err(glue->dev, >> + "can't get device tree parameters (%d)\n", ret); >> + return ret; >> + } >> + >> ret = spi_setup(spi); >> if (ret < 0) { >> dev_err(glue->dev, "spi_setup failed\n"); >> @@ -407,7 +453,8 @@ static int wl1271_probe(struct spi_device *spi) >> memset(res, 0x00, sizeof(res)); >> >> res[0].start = spi->irq; >> - res[0].flags = IORESOURCE_IRQ; >> + res[0].flags = IORESOURCE_IRQ | >> + irqd_get_trigger_type(irq_get_irq_data(spi->irq)); > > > irq_get_trigger_type()? > Will be replaced in v3. >> res[0].name = "irq"; >> >> ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); >> @@ -445,10 +492,10 @@ static int wl1271_remove(struct spi_device *spi) >> return 0; >> } >> >> - >> static struct spi_driver wl1271_spi_driver = { >> .driver = { >> .name = "wl1271_spi", >> + .of_match_table = of_match_ptr(wlcore_spi_of_match_table), >> }, >> >> .probe = wl1271_probe, >> > > Sorry for delayed replay. > -- Thanks, Uri