Return-path: Received: from mail-lf0-f43.google.com ([209.85.215.43]:32998 "EHLO mail-lf0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759368AbcAUNMY (ORCPT ); Thu, 21 Jan 2016 08:12:24 -0500 Received: by mail-lf0-f43.google.com with SMTP id m198so26301317lfm.0 for ; Thu, 21 Jan 2016 05:12:23 -0800 (PST) From: Michal Kazior To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Michal Kazior Subject: [PATCH 2/5] ath10k: add new htt definitions Date: Thu, 21 Jan 2016 14:13:24 +0100 Message-Id: <1453382007-24622-3-git-send-email-michal.kazior@tieto.com> (sfid-20160121_141228_807030_4FE6B8EE) In-Reply-To: <1453382007-24622-1-git-send-email-michal.kazior@tieto.com> References: <1452693668-30030-1-git-send-email-michal.kazior@tieto.com> <1453382007-24622-1-git-send-email-michal.kazior@tieto.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: These definitions are associated with some improvements upcomming for 10.4 and QCA99X0. Signed-off-by: Michal Kazior --- drivers/net/wireless/ath/ath10k/htt.h | 153 +++++++++++++++++++++++++++++++++- 1 file changed, 150 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h index edd3b9070de9..0c5628dafabf 100644 --- a/drivers/net/wireless/ath/ath10k/htt.h +++ b/drivers/net/wireless/ath/ath10k/htt.h @@ -52,6 +52,7 @@ enum htt_h2t_msg_type { /* host-to-target */ /* This command is used for sending management frames in HTT < 3.0. * HTT >= 3.0 uses TX_FRM for everything. */ HTT_H2T_MSG_TYPE_MGMT_TX = 7, + HTT_H2T_MSG_TYPE_TX_FETCH_RESP = 11, HTT_H2T_NUM_MSGS /* keep this last */ }; @@ -1306,9 +1307,43 @@ struct htt_frag_desc_bank_id { * so we use a conservatively safe value for now */ #define HTT_FRAG_DESC_BANK_MAX 4 -#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_MASK 0x03 -#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_LSB 0 -#define HTT_FRAG_DESC_BANK_CFG_INFO_SWAP (1 << 2) +#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_MASK 0x03 +#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_LSB 0 +#define HTT_FRAG_DESC_BANK_CFG_INFO_SWAP BIT(2) +#define HTT_FRAG_DESC_BANK_CFG_INFO_Q_STATE_VALID BIT(3) +#define HTT_FRAG_DESC_BANK_CFG_INFO_Q_STATE_DEPTH_TYPE_MASK BIT(4) +#define HTT_FRAG_DESC_BANK_CFG_INFO_Q_STATE_DEPTH_TYPE_LSB 4 + +enum htt_q_depth_type { + HTT_Q_DEPTH_TYPE_BYTES = 0, + HTT_Q_DEPTH_TYPE_MSDUS = 1, +}; + +#define HTT_TX_Q_STATE_NUM_PEERS (TARGET_10_4_NUM_QCACHE_PEERS_MAX + \ + TARGET_10_4_NUM_VDEVS) +#define HTT_TX_Q_STATE_NUM_TIDS 8 +#define HTT_TX_Q_STATE_ENTRY_SIZE 1 +#define HTT_TX_Q_STATE_ENTRY_MULTIPLIER 0 + +/** + * htt_q_state_conf - part of htt_frag_desc_bank_cfg for host q state config + * + * Defines host q state format and behavior. See htt_q_state. + * + * @record_size: Defines the size of each host q entry in bytes. In practice + * however firmware (at least 10.4.3-00191) ignores this host + * configuration value and uses hardcoded value of 1. + * @record_multiplier: This is valid only when q depth type is MSDUs. It + * defines the exponent for the power of 2 multiplication. + */ +struct htt_q_state_conf { + __le32 paddr; + __le16 num_peers; + __le16 num_tids; + u8 record_size; + u8 record_multiplier; + u8 pad[2]; +} __packed; struct htt_frag_desc_bank_cfg { u8 info; /* HTT_FRAG_DESC_BANK_CFG_INFO_ */ @@ -1316,6 +1351,114 @@ struct htt_frag_desc_bank_cfg { u8 desc_size; __le32 bank_base_addrs[HTT_FRAG_DESC_BANK_MAX]; struct htt_frag_desc_bank_id bank_id[HTT_FRAG_DESC_BANK_MAX]; + struct htt_q_state_conf q_state; +} __packed; + +#define HTT_TX_Q_STATE_ENTRY_COEFFICIENT 128 +#define HTT_TX_Q_STATE_ENTRY_FACTOR_MASK 0x3f +#define HTT_TX_Q_STATE_ENTRY_FACTOR_LSB 0 +#define HTT_TX_Q_STATE_ENTRY_EXP_MASK 0xc0 +#define HTT_TX_Q_STATE_ENTRY_EXP_LSB 6 + +/** + * htt_q_state - shared between host and firmware via DMA + * + * This structure is used for the host to expose it's software queue state to + * firmware so that its rate control can schedule fetch requests for optimized + * performance. This is most notably used for MU-MIMO aggregation when multiple + * MU clients are connected. + * + * @count: Each element defines the host queue depth. When q depth type was + * configured as HTT_Q_DEPTH_TYPE_BYTES then each entry is defined as: + * FACTOR * 128 * 8^EXP (see HTT_TX_Q_STATE_ENTRY_FACTOR_MASK and + * HTT_TX_Q_STATE_ENTRY_EXP_MASK). When q depth type was configured as + * HTT_Q_DEPTH_TYPE_MSDUS the number of packets is scaled by 2 ** + * record_multiplier (see htt_q_state_conf). + * @map: Used by firmware to quickly check which host queues are not empty. It + * is a bitmap simply saying. + * @seq: Used by firmware to quickly check if the host queues were updated + * since it last checked. + * + * FIXME: Is the q_state map[] size calculation really correct? + */ +struct htt_q_state { + u8 count[HTT_TX_Q_STATE_NUM_TIDS][HTT_TX_Q_STATE_NUM_PEERS]; + u32 map[HTT_TX_Q_STATE_NUM_TIDS][(HTT_TX_Q_STATE_NUM_PEERS + 31) / 32]; + __le32 seq; +} __packed; + +#define HTT_TX_FETCH_RECORD_INFO_PEER_ID_MASK 0x0fff +#define HTT_TX_FETCH_RECORD_INFO_PEER_ID_LSB 0 +#define HTT_TX_FETCH_RECORD_INFO_TID_MASK 0xf000 +#define HTT_TX_FETCH_RECORD_INFO_TID_LSB 12 + +struct htt_tx_fetch_record { + __le16 info; /* HTT_TX_FETCH_IND_RECORD_INFO_ */ + __le16 num_msdus; + __le32 num_bytes; +} __packed; + +struct htt_tx_fetch_ind { + u8 pad0; + __le16 fetch_seq_num; + __le32 token; + __le16 num_resp_ids; + __le16 num_records; + struct htt_tx_fetch_record records[0]; + __le32 resp_ids[0]; /* ath10k_htt_get_tx_fetch_ind_resp_ids() */ +} __packed; + +static inline void * +ath10k_htt_get_tx_fetch_ind_resp_ids(struct htt_tx_fetch_ind *ind) +{ + return (void *)&ind->records[le16_to_cpu(ind->num_records)]; +} + +struct htt_tx_fetch_resp { + u8 pad0; + __le16 resp_id; + __le16 fetch_seq_num; + __le16 num_records; + __le32 token; + struct htt_tx_fetch_record records[0]; +} __packed; + +struct htt_tx_fetch_confirm { + u8 pad0; + __le16 num_resp_ids; + __le32 resp_ids[0]; +} __packed; + +enum htt_tx_mode_switch_mode { + HTT_TX_MODE_SWITCH_PUSH = 0, + HTT_TX_MODE_SWITCH_PUSH_PULL = 1, +}; + +#define HTT_TX_MODE_SWITCH_IND_INFO0_ENABLE BIT(0) +#define HTT_TX_MODE_SWITCH_IND_INFO0_NUM_RECORDS_MASK 0xfffe +#define HTT_TX_MODE_SWITCH_IND_INFO0_NUM_RECORDS_LSB 1 + +#define HTT_TX_MODE_SWITCH_IND_INFO1_MODE_MASK 0x0003 +#define HTT_TX_MODE_SWITCH_IND_INFO1_MODE_LSB 0 +#define HTT_TX_MODE_SWITCH_IND_INFO1_THRESHOLD_MASK 0xfffc +#define HTT_TX_MODE_SWITCH_IND_INFO1_THRESHOLD_LSB 2 + +#define HTT_TX_MODE_SWITCH_RECORD_INFO0_PEER_ID_MASK 0x0fff +#define HTT_TX_MODE_SWITCH_RECORD_INFO0_PEER_ID_LSB 0 +#define HTT_TX_MODE_SWITCH_RECORD_INFO0_TID_MASK 0xf000 +#define HTT_TX_MODE_SWITCH_RECORD_INFO0_TID_LSB 12 + +struct htt_tx_mode_switch_record { + __le16 info0; /* HTT_TX_MODE_SWITCH_RECORD_INFO0_ */ + __le16 num_max_msdus; +} __packed; + +struct htt_tx_mode_switch_ind { + u8 pad0; + __le16 info0; /* HTT_TX_MODE_SWITCH_IND_INFO0_ */ + __le16 info1; /* HTT_TX_MODE_SWITCH_IND_INFO1_ */ + u8 pad1[2]; + struct htt_tx_mode_switch_record records[0]; } __packed; union htt_rx_pn_t { @@ -1340,6 +1483,7 @@ struct htt_cmd { struct htt_oob_sync_req oob_sync_req; struct htt_aggr_conf aggr_conf; struct htt_frag_desc_bank_cfg frag_desc_bank_cfg; + struct htt_tx_fetch_resp tx_fetch_resp; }; } __packed; @@ -1364,6 +1508,9 @@ struct htt_resp { struct htt_rx_pn_ind rx_pn_ind; struct htt_rx_offload_ind rx_offload_ind; struct htt_rx_in_ord_ind rx_in_ord_ind; + struct htt_tx_fetch_ind tx_fetch_ind; + struct htt_tx_fetch_confirm tx_fetch_confirm; + struct htt_tx_mode_switch_ind tx_mode_switch_ind; }; } __packed; -- 2.1.4