Return-path: Received: from mx0b-0016f401.pphosted.com ([67.231.156.173]:44645 "EHLO mx0b-0016f401.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751042AbcCRLJU (ORCPT ); Fri, 18 Mar 2016 07:09:20 -0400 From: Amitkumar Karwar To: CC: Cathy Luo , Nishant Sarmukadam , , Wei-Ning Huang , Xinming Hu , Amitkumar Karwar Subject: [PATCH v5 1/2] dt: bindings: add MARVELL's sd8xxx wireless device Date: Fri, 18 Mar 2016 04:03:51 -0700 Message-ID: <1458299032-31929-1-git-send-email-akarwar@marvell.com> (sfid-20160318_120923_884682_BD8B053C) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Xinming Hu Add device tree binding documentation for MARVELL's sd8xxx (sd8897 and sd8997) wlan chip. Signed-off-by: Xinming Hu Signed-off-by: Amitkumar Karwar --- Listing changelist for both 1/2 and 2/2 patches v3: Don't update adapter->dt_node if mwifiex_plt_dev is NULL v4: a)Corrected the 'name' and 'compatible' property names.(Arnd Bergmann and Rob Herring) b)Patch description wraped in 72 columns(Rob Herring) c)Moved DT binding file to bindings/net/wireless/(Rob Herring) d)Renamed "mwifiex,chip-gpio" to "marvell,wakeup-gpios"(Rob Herring/ Arnd Bergmann) e)Replaced #ifdef with __maybe_unused(Arnd Bergmann) v5: a)Removed wildcards from compatible string(Arnd Bergmann) b)Prepared single patch for all binding changes(Rob Herring) c)Specified our node as a subnode of SDIO controller. With this approach, we don't need to register new platform driver. (Rob herring) --- .../bindings/net/wireless/marvell-sd8xxx.txt | 56 ++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt new file mode 100644 index 0000000..c43d488 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt @@ -0,0 +1,56 @@ +Marvell 8897/8997 (sd8897/sd8997) SDIO devices +------ + +This node provides properties for controlling the marvell sdio wireless device. +The node is expected to be specified as a child node to the SDIO controller that +connects the device to the system. + +Required properties: + + - compatible : should be one of the following: + * "marvell,sd8897" + * "marvell,sd8997" + +Optional properties: + + - marvell,caldata* : A series of properties with marvell,caldata prefix, + represent Calibration data downloaded to the device during + initialization. This is an array of unsigned values. + - marvell,wakeup-pin : 'wakeuppin' is a wakeup pin number of wifi chip which will + be configured to firmware. firmware will wakeup host side use + the pin during suspend/resume stage. + - interrupt-parent: phandle of the parent interrupt controller + - interrupts : interrupt pin number to the cpu. driver will request an irq based on + this interrupt number. during system suspend, the irq will be enabled + as system wakeup source, so that the wifi chip can wakeup host + platform under certain condition. during system resume, the irq will + be disabled to make sure unnecessary interrupt is not received. + +Example: + +Tx power limit calibration data is configured in below example. +The calibration data is an array of unsigned values, the length +can vary between hw versions. +IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured +so that firmware can wakeup host using this device side pin. + +&mmc3 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + mwifiex: mwifiex@3 { + compatible = "marvell,sd8897"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + + marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 < + 0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>; + marvell,wakeup-pin = <3>; + }; +}; -- 1.8.1.4