Return-path: Received: from mail.neratec.com ([46.140.151.2]:19152 "EHLO mail.neratec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754767AbcCaQNx (ORCPT ); Thu, 31 Mar 2016 12:13:53 -0400 From: Zefir Kurtisi To: linux-wireless@vger.kernel.org Cc: kvalo@qca.qualcomm.com, ath9k-devel@lists.ath9k.org Subject: [PATCH] ath9k: interpret requested txpower in EIRP domain Date: Thu, 31 Mar 2016 18:07:10 +0200 Message-Id: <1459440430-7676-1-git-send-email-zefir.kurtisi@neratec.com> (sfid-20160331_181357_052328_F50B62D0) Sender: linux-wireless-owner@vger.kernel.org List-ID: Tx power limitations at upper layers are interpreted in the EIRP domain. When the user requests a given maximum txpower, e.g. with: 'iw phy0 set txpower fixed 1500', he expects the EIRP to be at or below 15dBm. In ath9k_hw_apply_txpower(), the interpretation is different: the antenna-gain is capped against the current txpower limit in the regulatory, but not against the user set value. It ensures that the resulting EIRP is below the limit defined by the active countrycode, but not below the value the user requested. In a scenario like e.g. a) antenna_gain=6 b) countrycode limits to eirp=18 c) user set txpower=15 this will cause a setting for AR_PHY_POWER_TX_RATE regs resulting in an EIRP > 15. This patch ensures that antenna-gain is considered whenever the txpower limit is adjusted and with that the user set limits are kept. Signed-off-by: Zefir Kurtisi --- drivers/net/wireless/ath/ath9k/hw.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index e7a3101..30be8a5 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2834,7 +2834,6 @@ void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, struct ath_regulatory *reg = ath9k_hw_regulatory(ah); struct ieee80211_channel *channel; int chan_pwr, new_pwr, max_gain; - int ant_gain, ant_reduction = 0; if (!chan) return; @@ -2842,15 +2841,10 @@ void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, channel = chan->chan; chan_pwr = min_t(int, channel->max_power * 2, MAX_RATE_POWER); new_pwr = min_t(int, chan_pwr, reg->power_limit); - max_gain = chan_pwr - new_pwr + channel->max_antenna_gain * 2; - - ant_gain = get_antenna_gain(ah, chan); - if (ant_gain > max_gain) - ant_reduction = ant_gain - max_gain; ah->eep_ops->set_txpower(ah, chan, ath9k_regd_get_ctl(reg, chan), - ant_reduction, new_pwr, test); + get_antenna_gain(ah, chan), new_pwr, test); } void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) -- 2.7.4