Return-path: Received: from mail.kernel.org ([198.145.29.136]:47307 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932485AbcCTAuo (ORCPT ); Sat, 19 Mar 2016 20:50:44 -0400 Date: Sat, 19 Mar 2016 19:50:39 -0500 From: Rob Herring To: Amitkumar Karwar Cc: linux-wireless@vger.kernel.org, Cathy Luo , Nishant Sarmukadam , devicetree@vger.kernel.org, Wei-Ning Huang , Xinming Hu Subject: Re: [PATCH v5 1/2] dt: bindings: add MARVELL's sd8xxx wireless device Message-ID: <20160320005039.GA10937@rob-hp-laptop> (sfid-20160320_015048_479375_43C9367E) References: <1458299032-31929-1-git-send-email-akarwar@marvell.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1458299032-31929-1-git-send-email-akarwar@marvell.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Fri, Mar 18, 2016 at 04:03:51AM -0700, Amitkumar Karwar wrote: > From: Xinming Hu > > Add device tree binding documentation for MARVELL's sd8xxx > (sd8897 and sd8997) wlan chip. > > Signed-off-by: Xinming Hu > Signed-off-by: Amitkumar Karwar > --- > Listing changelist for both 1/2 and 2/2 patches > v3: Don't update adapter->dt_node if mwifiex_plt_dev is NULL > > v4: a)Corrected the 'name' and 'compatible' property names.(Arnd Bergmann and Rob > Herring) > b)Patch description wraped in 72 columns(Rob Herring) > c)Moved DT binding file to bindings/net/wireless/(Rob Herring) > d)Renamed "mwifiex,chip-gpio" to "marvell,wakeup-gpios"(Rob Herring/ > Arnd Bergmann) > e)Replaced #ifdef with __maybe_unused(Arnd Bergmann) > > v5: a)Removed wildcards from compatible string(Arnd Bergmann) > b)Prepared single patch for all binding changes(Rob Herring) > c)Specified our node as a subnode of SDIO controller. With this approach, we > don't need to register new platform driver. (Rob herring) > --- > .../bindings/net/wireless/marvell-sd8xxx.txt | 56 ++++++++++++++++++++++ > 1 file changed, 56 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt > > diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt > new file mode 100644 > index 0000000..c43d488 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt > @@ -0,0 +1,56 @@ > +Marvell 8897/8997 (sd8897/sd8997) SDIO devices > +------ > + > +This node provides properties for controlling the marvell sdio wireless device. > +The node is expected to be specified as a child node to the SDIO controller that > +connects the device to the system. > + > +Required properties: > + > + - compatible : should be one of the following: > + * "marvell,sd8897" > + * "marvell,sd8997" > + > +Optional properties: > + > + - marvell,caldata* : A series of properties with marvell,caldata prefix, > + represent Calibration data downloaded to the device during > + initialization. This is an array of unsigned values. You need to list out the specific property names and size of the data. > + - marvell,wakeup-pin : 'wakeuppin' is a wakeup pin number of wifi chip which will > + be configured to firmware. firmware will wakeup host side use > + the pin during suspend/resume stage. > + - interrupt-parent: phandle of the parent interrupt controller > + - interrupts : interrupt pin number to the cpu. driver will request an irq based on > + this interrupt number. during system suspend, the irq will be enabled > + as system wakeup source, so that the wifi chip can wakeup host > + platform under certain condition. during system resume, the irq will > + be disabled to make sure unnecessary interrupt is not received. > + > +Example: > + > +Tx power limit calibration data is configured in below example. > +The calibration data is an array of unsigned values, the length > +can vary between hw versions. > +IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured > +so that firmware can wakeup host using this device side pin. > + > +&mmc3 { > + status = "okay"; > + vmmc-supply = <&wlan_en_reg>; > + bus-width = <4>; > + cap-power-off-card; > + keep-power-in-suspend; > + > + #address-cells = <1>; > + #size-cells = <0>; > + mwifiex: mwifiex@3 { The unit address and reg value don't match. IIRC, the correct value is the SDIO function number. > + compatible = "marvell,sd8897"; > + reg = <1>; > + interrupt-parent = <&pio>; > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > + > + marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 < > + 0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>; > + marvell,wakeup-pin = <3>; > + }; > +}; > -- > 1.8.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html