Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:40766 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932231AbcDYM6Q (ORCPT ); Mon, 25 Apr 2016 08:58:16 -0400 From: Maya Erez To: Kalle Valo Cc: Maya Erez , linux-wireless@vger.kernel.org, wil6210@qca.qualcomm.com Subject: [PATCH v2 3/7] wil6210: change RX_HTRSH interrupt print level to debug Date: Mon, 25 Apr 2016 15:57:54 +0300 Message-Id: <1461589078-29854-4-git-send-email-qca_merez@qca.qualcomm.com> (sfid-20160425_145824_527945_8BB54FE9) In-Reply-To: <1461589078-29854-1-git-send-email-qca_merez@qca.qualcomm.com> References: <1461589078-29854-1-git-send-email-qca_merez@qca.qualcomm.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: When using interrupt moderation RX_HTRSH interrupt can occur frequently during high throughput and should not be considered as error. Such print-outs can degrade the performance hence should be printed in debug print level. Signed-off-by: Maya Erez --- drivers/net/wireless/ath/wil6210/interrupt.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index fe66b2b..6897754 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -228,11 +228,8 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie) */ if (likely(isr & (BIT_DMA_EP_RX_ICR_RX_DONE | BIT_DMA_EP_RX_ICR_RX_HTRSH))) { - wil_dbg_irq(wil, "RX done\n"); - - if (unlikely(isr & BIT_DMA_EP_RX_ICR_RX_HTRSH)) - wil_err_ratelimited(wil, - "Received \"Rx buffer is in risk of overflow\" interrupt\n"); + wil_dbg_irq(wil, "RX done / RX_HTRSH received, ISR (0x%x)\n", + isr); isr &= ~(BIT_DMA_EP_RX_ICR_RX_DONE | BIT_DMA_EP_RX_ICR_RX_HTRSH); -- 1.8.5.2