Return-path: Received: from mout.kundenserver.de ([212.227.126.187]:56498 "EHLO mout.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751451AbcDRWAA (ORCPT ); Mon, 18 Apr 2016 18:00:00 -0400 From: Arnd Bergmann To: Jes Sorensen , Kalle Valo Cc: Arnd Bergmann , Jakub Sitnicki , linux-wireless@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] rtl8xxxu: hide unused tables Date: Mon, 18 Apr 2016 23:59:31 +0200 Message-Id: <1461016782-2640046-1-git-send-email-arnd@arndb.de> (sfid-20160419_000026_109456_3F8177B7) Sender: linux-wireless-owner@vger.kernel.org List-ID: The references to some arrays in the rtl8xxxu driver were moved inside of an #ifdef, but the symbols remain outside, resulting in build warnings: rtl8xxxu/rtl8xxxu.c:1506:33: error: 'rtl8188ru_radioa_1t_highpa_table' defined but not used rtl8xxxu/rtl8xxxu.c:1431:33: error: 'rtl8192cu_radioa_1t_init_table' defined but not used rtl8xxxu/rtl8xxxu.c:1407:33: error: 'rtl8192cu_radiob_2t_init_table' defined but not used rtl8xxxu/rtl8xxxu.c:1332:33: error: 'rtl8192cu_radioa_2t_init_table' defined but not used rtl8xxxu/rtl8xxxu.c:239:35: error: 'rtl8192c_power_base' defined but not used rtl8xxxu/rtl8xxxu.c:217:35: error: 'rtl8188r_power_base' defined but not used This adds an extra #ifdef around them to shut up the warnings. Signed-off-by: Arnd Bergmann Fixes: 2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts") Fixes: 4062b8ffec36 ("rtl8xxxu: Move PHY RF init into device specific functions") --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 928ca56f751c..0ba84b5fe0d6 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -214,6 +214,7 @@ static struct rtl8xxxu_reg8val rtl8192e_mac_init_table[] = { {0xffff, 0xff}, }; +#ifdef CONFIG_RTL8XXXU_UNTESTED static struct rtl8xxxu_power_base rtl8188r_power_base = { .reg_0e00 = 0x06080808, .reg_0e04 = 0x00040406, @@ -257,6 +258,7 @@ static struct rtl8xxxu_power_base rtl8192c_power_base = { .reg_084c = 0x0b0c0d0e, .reg_0868 = 0x01030509, }; +#endif static struct rtl8xxxu_power_base rtl8723a_power_base = { .reg_0e00 = 0x0a0c0c0c, @@ -1329,6 +1331,7 @@ static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = { {0xff, 0xffffffff} }; +#ifdef CONFIG_RTL8XXXU_UNTESTED static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = { {0x00, 0x00030159}, {0x01, 0x00031284}, {0x02, 0x00098000}, {0x03, 0x00018c63}, @@ -1577,6 +1580,7 @@ static struct rtl8xxxu_rfregval rtl8188ru_radioa_1t_highpa_table[] = { {0x00, 0x00030159}, {0xff, 0xffffffff} }; +#endif static struct rtl8xxxu_rfregval rtl8192eu_radioa_init_table[] = { {0x7f, 0x00000082}, {0x81, 0x0003fc00}, -- 2.7.0