Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:19715 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932179AbcE0OqS (ORCPT ); Fri, 27 May 2016 10:46:18 -0400 From: Rajkumar Manoharan To: CC: , , "Rajkumar Manoharan" Subject: [PATCH 1/5] ath10k: fix operating irq mode for ahb device Date: Fri, 27 May 2016 20:15:55 +0530 Message-ID: <20160527144559.4053-1-rmanohar@qti.qualcomm.com> (sfid-20160527_164636_948325_C3EB36AC) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Earlier when operating irq mode is legacy, interrupts are disabled and re-enabled based on num_msi_intrs. commit cfe9011a05a8 ("ath10k: remove MSI range support") replaced num_msi_intrs by oper_irq_mode. Since oper_irq_mode is not initialized for ahb devices (i.e qca4019), device boot up is failed during probe. Fixes: cfe9011a05a8 ("ath10k: remove MSI range support") Signed-off-by: Rajkumar Manoharan --- drivers/net/wireless/ath/ath10k/ahb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c index bd62bc19e758..37ff36fca7bc 100644 --- a/drivers/net/wireless/ath/ath10k/ahb.c +++ b/drivers/net/wireless/ath/ath10k/ahb.c @@ -476,6 +476,7 @@ static irqreturn_t ath10k_ahb_interrupt_handler(int irq, void *arg) static int ath10k_ahb_request_irq_legacy(struct ath10k *ar) { + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar); int ret; @@ -487,6 +488,7 @@ static int ath10k_ahb_request_irq_legacy(struct ath10k *ar) ar_ahb->irq, ret); return ret; } + ar_pci->oper_irq_mode = ATH10K_PCI_IRQ_LEGACY; return 0; } -- 2.8.3