Return-path: Received: from mx1.redhat.com ([209.132.183.28]:59029 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752135AbcF2OMb (ORCPT ); Wed, 29 Jun 2016 10:12:31 -0400 From: Hans de Goede To: "John W . Linville" Cc: Arend van Spriel , Maxime Ripard , Chen-Yu Tsai , linux-wireless@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree , linux-sunxi@googlegroups.com, Hans de Goede Subject: [PATCH 3/4] ARM: dts: sun7i-a20-wits-pro-a20-dkt: Set brcm,nvram_file_name Date: Wed, 29 Jun 2016 16:04:33 +0200 Message-Id: <1467209074-15634-3-git-send-email-hdegoede@redhat.com> (sfid-20160629_161240_904738_27DD2D88) In-Reply-To: <1467209074-15634-1-git-send-email-hdegoede@redhat.com> References: <1467209074-15634-1-git-send-email-hdegoede@redhat.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: The wits pro uses an ap6476 sdio wifi module, we do not have a nvram file for this, so set brcm,nvram_file_name to brcmfmac43362-ap6210.txt which works fine for this wifi module. Setting brcm,nvram_file_name allows us to ship the ap6210 specific nvram file in linux-firmware to get the wifi to work out of the box without users needing to download and install the nvram file themselves. Signed-off-by: Hans de Goede --- arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index dc31d47..3c5455a9 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -140,6 +140,7 @@ brcmf: bcrmf@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; + brcm,nvram_file_name = "brcm/brcmfmac43362-ap6210.txt"; interrupt-parent = <&pio>; interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ interrupt-names = "host-wake"; -- 2.7.4