Return-path: Received: from mx1.redhat.com ([209.132.183.28]:45550 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752013AbcF2OVa (ORCPT ); Wed, 29 Jun 2016 10:21:30 -0400 From: Hans de Goede To: "John W . Linville" Cc: Arend van Spriel , Maxime Ripard , Chen-Yu Tsai , linux-wireless@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree , linux-sunxi@googlegroups.com, Hans de Goede Subject: [PATCH 4/4] ARM: dts: sun5i-a10s-auxtek-t004: Set brcm,nvram_file_name Date: Wed, 29 Jun 2016 16:04:34 +0200 Message-Id: <1467209074-15634-4-git-send-email-hdegoede@redhat.com> (sfid-20160629_162136_043634_D7617F3B) In-Reply-To: <1467209074-15634-1-git-send-email-hdegoede@redhat.com> References: <1467209074-15634-1-git-send-email-hdegoede@redhat.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: The auxtek t004 uses a toc9002 sdio wifi module, the android nvram file for this is for an older firmware which does not work with the mainline kernel driver. So we set brcm,nvram_file_name to brcmfmac43362-ap6210.txt which works fine for this wifi module. Setting brcm,nvram_file_name allows us to ship the ap6210 specific nvram file in linux-firmware to get the wifi to work out of the box without users needing to download and install the nvram file themselves. Signed-off-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index a790ec8..e15d1ef 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -118,6 +118,12 @@ non-removable; cap-sdio-irq; status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + brcm,nvram_file_name = "brcm/brcmfmac43362-ap6210.txt"; + }; }; &ohci0 { -- 2.7.4