Return-path: Received: from mail-wm0-f66.google.com ([74.125.82.66]:34258 "EHLO mail-wm0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750972AbcFWPNi (ORCPT ); Thu, 23 Jun 2016 11:13:38 -0400 Received: by mail-wm0-f66.google.com with SMTP id 187so11790136wmz.1 for ; Thu, 23 Jun 2016 08:13:37 -0700 (PDT) From: Martin Blumenstingl To: ath9k-devel@qca.qualcomm.com, linux-wireless@vger.kernel.org, ath9k-devel@lists.ath9k.org Cc: nbd@nbd.name, Martin Blumenstingl Subject: [PATCH 1/2] ath9k: parse the device configuration from an OF node Date: Thu, 23 Jun 2016 17:13:27 +0200 Message-Id: <20160623151328.24061-2-martin.blumenstingl@googlemail.com> (sfid-20160623_171341_839092_DC7D202A) In-Reply-To: <20160623151328.24061-1-martin.blumenstingl@googlemail.com> References: <20160623151328.24061-1-martin.blumenstingl@googlemail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: This makes it possible to configure ath9k based devices using devicetree. That makes some out-of-tree "convert devicetree to ath9k_platform_data glue"-code obsolete. Signed-off-by: Martin Blumenstingl --- drivers/net/wireless/ath/ath9k/init.c | 70 +++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index a0f4a52..0f76137 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -555,6 +557,70 @@ static int ath9k_init_platform(struct ath_softc *sc) return 0; } +static int ath9k_of_init(struct ath_softc *sc) +{ + struct device_node *np = sc->dev->of_node; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + const char *mac, *eeprom_name; + int led_pin, ret; + u32 gpio_data; + + if (!np) + return 0; + + ath_dbg(common, CONFIG, "parsing configuration from OF node\n"); + + if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) + ah->led_pin = led_pin; + + if (!of_property_read_u32(np, "ath,gpio-mask", &gpio_data)) + ah->gpio_mask = gpio_data; + + if (!of_property_read_u32(np, "ath,gpio-val", &gpio_data)) + ah->gpio_val = gpio_data; + + if (of_property_read_bool(np, "ath,clk-25mhz")) + ah->is_clk_25mhz = true; + + if (!of_property_read_u32(np, "ath,gpio-mask", &gpio_data)) + ah->gpio_mask = gpio_data; + + if (!of_property_read_u32(np, "ath,gpio-val", &gpio_data)) + ah->gpio_val = gpio_data; + + if (of_property_read_bool(np, "ath,clk-25mhz")) + ah->is_clk_25mhz = true; + + if (of_property_read_bool(np, "ath,led-active-high")) + ah->config.led_active_high = true; + + if (of_property_read_bool(np, "ath,disable-2ghz")) + ah->disable_2ghz = true; + + if (of_property_read_bool(np, "ath,disable-5ghz")) + ah->disable_5ghz = true; + + if (of_property_read_bool(np, "ath,check-eeprom-endianness")) + ah->ah_flags &= ~AH_NO_EEP_SWAP; + else + ah->ah_flags |= AH_NO_EEP_SWAP; + + if (!of_property_read_string(np, "ath,eeprom-name", &eeprom_name)) { + ret = ath9k_eeprom_request(sc, eeprom_name); + if (ret) + return ret; + } + + mac = of_get_mac_address(np); + if (mac) + ether_addr_copy(common->macaddr, mac); + + ah->ah_flags &= ~AH_USE_EEPROM; + + return 0; +} + static int ath9k_init_softc(u16 devid, struct ath_softc *sc, const struct ath_bus_ops *bus_ops) { @@ -611,6 +677,10 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, if (ret) return ret; + ret = ath9k_of_init(sc); + if (ret) + return ret; + if (ath9k_led_active_high != -1) ah->config.led_active_high = ath9k_led_active_high == 1; -- 2.9.0