Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]:39434 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755542AbcFGOuK (ORCPT ); Tue, 7 Jun 2016 10:50:10 -0400 Date: Tue, 7 Jun 2016 20:20:02 +0530 From: Mohammed Shafi Shajakhan To: Sven Eckelmann Cc: "Valo, Kalle" , "ath10k@lists.infradead.org" , "linux-wireless@vger.kernel.org" Subject: Re: [PATCH 0/2] ath10k: Add support for QCA9887 Message-ID: <20160607145002.GB11250@atheros-ThinkPad-T61> (sfid-20160607_165016_937517_38BD5C44) References: <1568876.Six5hABE57@bentobox> <1505571.v1gM3hzMhG@bentobox> <87wpmf4qm5.fsf@kamboji.qca.qualcomm.com> <2262792.6VVL0Htyzj@bentobox> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <2262792.6VVL0Htyzj@bentobox> Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Sven, On Mon, May 30, 2016 at 01:12:27PM +0200, Sven Eckelmann wrote: > On Friday 27 May 2016 12:44:52 Valo, Kalle wrote: > [...] > > > But maybe I should add that the results with the original AP147 firmware also > > > wasn't better. > > > > That doesn't sound good. Maybe a calibration issue? > > Maybe but I don't have a different card to compare it to. > > [...] > > I pushed a new firmware image firmware-5.bin_10.2.3.31.7-2 with those > > enabled: > > > > https://github.com/kvalo/ath10k-firmware/tree/master/QCA9887 > > Thanks for the updated firmware file. I have done some basic tests and seems > to work fine. Bindiff also looks fine > [shafi] it would be helpful if you can share your basic test results (if its possible to share). Have you tried to bring up the card in 5ghz (or) 2ghz. Or both of them were tried ? regards shafi