Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]:47262 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752097AbcFPMxL (ORCPT ); Thu, 16 Jun 2016 08:53:11 -0400 From: Mohammed Shafi Shajakhan To: CC: , , "Mohammed Shafi Shajakhan" Subject: [PATCH] ath10k: Enable beacon loss detection support for 10.4 Date: Thu, 16 Jun 2016 18:24:44 +0530 Message-ID: <1466081684-8074-1-git-send-email-mohammed@qca.qualcomm.com> (sfid-20160616_145315_237467_1D228F20) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Mohammed Shafi Shajakhan Enable beacon loss detection support for 10.4 by handling roam event. With this change QCA99X0 station is able to detect beacon loss when the AP is powered off Signed-off-by: Mohammed Shafi Shajakhan --- drivers/net/wireless/ath/ath10k/wmi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 6279ab4..4dd35f1 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -5257,6 +5257,9 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_4_PEER_STA_KICKOUT_EVENTID: ath10k_wmi_event_peer_sta_kickout(ar, skb); break; + case WMI_10_4_ROAM_EVENTID: + ath10k_wmi_event_roam(ar, skb); + break; case WMI_10_4_HOST_SWBA_EVENTID: ath10k_wmi_event_host_swba(ar, skb); break; @@ -7903,6 +7906,7 @@ static const struct wmi_ops wmi_10_4_ops = { .pull_phyerr = ath10k_wmi_10_4_op_pull_phyerr_ev, .pull_svc_rdy = ath10k_wmi_main_op_pull_svc_rdy_ev, .pull_rdy = ath10k_wmi_op_pull_rdy_ev, + .pull_roam_ev = ath10k_wmi_op_pull_roam_ev, .get_txbf_conf_scheme = ath10k_wmi_10_4_txbf_conf_scheme, .gen_pdev_suspend = ath10k_wmi_op_gen_pdev_suspend, -- 1.9.1