Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:43194 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932128AbcFBO46 (ORCPT ); Thu, 2 Jun 2016 10:56:58 -0400 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Subject: Re: [1/5] ath10k: fix operating irq mode for ahb device From: Kalle Valo In-Reply-To: <20160527144559.4053-1-rmanohar@qti.qualcomm.com> To: Rajkumar Manoharan CC: , , "Rajkumar Manoharan" , Message-ID: (sfid-20160602_165701_534926_31ADF67B) Date: Thu, 2 Jun 2016 16:56:51 +0200 Sender: linux-wireless-owner@vger.kernel.org List-ID: Rajkumar Manoharan wrote: > Earlier when operating irq mode is legacy, interrupts are disabled > and re-enabled based on num_msi_intrs. commit cfe9011a05a8 ("ath10k: > remove MSI range support") replaced num_msi_intrs by oper_irq_mode. > Since oper_irq_mode is not initialized for ahb devices (i.e qca4019), > device boot up is failed during probe. > > Fixes: cfe9011a05a8 ("ath10k: remove MSI range support") > Signed-off-by: Rajkumar Manoharan Thanks, 5 patches applied to ath.git: 2e550b6d277b ath10k: fix operating irq mode for ahb device 10f8ec64a2a6 ath10k: remove unused phy_mode_to_band b855de0f5792 ath10k: update module description 64e001f41676 ath10k: add new ATH10K_FW_FEATURE_BTCOEX_PARAM 39136248cf8d ath10k: add pdev param support to enable/disable btcoex -- Sent by pwcli https://patchwork.kernel.org/patch/9138581/