Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:13901 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751601AbcGRUIO (ORCPT ); Mon, 18 Jul 2016 16:08:14 -0400 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Subject: Re: ath10k: add support for controlling tx power to a station From: Kalle Valo In-Reply-To: <1465925914-6404-1-git-send-email-arnagara@qti.qualcomm.com> To: Ashok Raj Nagarajan CC: , Ashok Raj Nagarajan , , Message-ID: <75a921ad7f1940f6ba046564f67c508d@euamsexm01a.eu.qualcomm.com> (sfid-20160718_220817_943215_A818E621) Date: Mon, 18 Jul 2016 22:08:05 +0200 Sender: linux-wireless-owner@vger.kernel.org List-ID: Ashok Raj Nagarajan wrote: > This patch will add the support to control the transmit power for traffic > to a station associated with the AP. Userspace provide the transmit power > value in mBm units and the allowed range is from 0 to 70. Underlying FW > will enforce that the maximum tx power will be based on the regulatory > requirements. If the user given transmit power is greater than the allowed > tx power in the given channel, then the FW will use the maximum tx power > in the same channel. > > When 0 is sent to the FW as tx power, it will revert to the automatic tx > power for the station. > > Signed-off-by: Ashok Raj Nagarajan (A note to patchwork) Depends on these patches: cfg80211: Add support to set tx power for a station associated https://patchwork.kernel.org/patch/9176355/ mac80211: store tx power value from user to station https://patchwork.kernel.org/patch/9176359/ Both are currently in state Changes Requested. -- Sent by pwcli https://patchwork.kernel.org/patch/9176353/