Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]:30183 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752116AbcI1KOP (ORCPT ); Wed, 28 Sep 2016 06:14:15 -0400 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Subject: Re: ath10k: add support for controlling tx power to a station From: Kalle Valo In-Reply-To: <1465925914-6404-1-git-send-email-arnagara@qti.qualcomm.com> References: <1465925914-6404-1-git-send-email-arnagara@qti.qualcomm.com> To: Ashok Raj Nagarajan CC: , Ashok Raj Nagarajan , , Message-ID: (sfid-20160928_121418_461549_DFDCB64E) Date: Wed, 28 Sep 2016 12:14:07 +0200 Sender: linux-wireless-owner@vger.kernel.org List-ID: Ashok Raj Nagarajan wrote: > This patch will add the support to control the transmit power for traffic > to a station associated with the AP. Userspace provide the transmit power > value in mBm units and the allowed range is from 0 to 70. Underlying FW > will enforce that the maximum tx power will be based on the regulatory > requirements. If the user given transmit power is greater than the allowed > tx power in the given channel, then the FW will use the maximum tx power > in the same channel. > > When 0 is sent to the FW as tx power, it will revert to the automatic tx > power for the station. > > Signed-off-by: Ashok Raj Nagarajan No development on the dependency patches. I'm dropping this for now, please resend once mac80211 patches are accepted. Patch set to Changes Requested. -- https://patchwork.kernel.org/patch/9176353/ Documentation about submitting wireless patches and checking status from patchwork: https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches