Return-path: Received: from mail-wm0-f43.google.com ([74.125.82.43]:32999 "EHLO mail-wm0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753078AbcJORFH (ORCPT ); Sat, 15 Oct 2016 13:05:07 -0400 Received: by mail-wm0-f43.google.com with SMTP id f193so4945282wmg.0 for ; Sat, 15 Oct 2016 10:04:50 -0700 (PDT) Received: from localhost.localdomain (127.7.150.83.ftth.as8758.net. [83.150.7.127]) by smtp.gmail.com with ESMTPSA id z65sm4257189wmg.16.2016.10.15.10.04.47 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sat, 15 Oct 2016 10:04:48 -0700 (PDT) Subject: Re: compex wle900vx (ath10k) problem on 4.4.24 / armv7 To: linux-wireless@vger.kernel.org References: <41e828b1-c340-d6c6-61f4-051c845820c8@gmail.com> From: Oliver Zemann Message-ID: <80788796-5768-1650-dcef-59ccfbe7be6f@gmail.com> (sfid-20161015_190521_636421_DDB6011E) Date: Sat, 15 Oct 2016 19:04:47 +0200 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: I hope thats what you mean. I am not that familiar with linux drivers [root@alarm ~]# lsmod Module Size Used by ath10k_pci 30053 0 ath10k_core 193491 1 ath10k_pci ath 18176 1 ath10k_core mac80211 405739 1 ath10k_core cfg80211 215848 3 ath,mac80211,ath10k_core rfkill 14391 2 cfg80211 marvell_cesa 25839 0 des_generic 16747 1 marvell_cesa sch_fq_codel 7757 9 ip_tables 11170 0 x_tables 11520 1 ip_tables autofs4 22783 2 [root@alarm ~]# rmmod ath10k_pci ath10k_core [root@alarm ~]# modprobe ath10k_core [root@alarm ~]# modprobe ath10k_pci [28501.637198] ath10k_pci 0000:02:00.0: Refused to change power state, currently in D3 [28501.675138] ath10k_pci 0000:02:00.0: failed to wake up device : -110 [28501.681625] ath10k_pci: probe of 0000:02:00.0 failed with error -110 Am 15.10.2016 um 16:44 schrieb Sebastian Gottschall: > could you please attach a full log? i see no driver loading here. this > is just a small part of the kernel boot log, but no driver intialisation > > Am 15.10.2016 um 16:00 schrieb Oliver Zemann: >> I have a clearfog pro (arm7) from marvel and bought a pcie wifi card. >> Unfortunately, it does not work. >> I am not sure if this is a bug in the module or even in some pci-e >> driver. Maybe someone could tell me that. >> >> dmesg: >> >> [ 5.348307] mvebu-pcie soc:pcie-controller: >> /soc/pcie-controller/pcie@2,0: reset gpio is active low >> [ 5.358026] mvebu-pcie soc:pcie-controller: >> /soc/pcie-controller/pcie@3,0: reset gpio is active low >> [ 5.421496] mvebu-pcie soc:pcie-controller: PCI host bridge to bus >> 0000:00 >> [ 5.428390] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] >> [ 5.434680] pci_bus 0000:00: root bus resource [mem >> 0xf8000000-0xffdfffff] >> [ 5.441575] pci_bus 0000:00: root bus resource [bus 00-ff] >> [ 5.447083] pci 0000:00:02.0: [11ab:6828] type 01 class 0x060400 >> [ 5.447198] pci 0000:00:03.0: [11ab:6828] type 01 class 0x060400 >> [ 5.447295] PCI: bus0: Fast back to back transfers disabled >> [ 5.452887] pci 0000:00:02.0: bridge configuration invalid ([bus >> 00-00]), reconfiguring >> [ 5.460911] pci 0000:00:03.0: bridge configuration invalid ([bus >> 00-00]), reconfiguring >> [ 5.468986] PCI: bus1: Fast back to back transfers enabled >> [ 5.474491] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 >> [ 5.474561] pci 0000:02:00.0: [168c:003c] type 00 class 0x028000 >> [ 5.474593] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x001fffff >> 64bit] >> [ 5.474617] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] >> [ 5.474667] pci 0000:02:00.0: supports D1 D2 >> [ 5.511395] PCI: bus2: Fast back to back transfers enabled >> [ 5.516894] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 >> [ 5.516905] pci 0000:02:00.0: of_irq_parse_pci() failed with rc=134 >> [ 5.523207] pci 0000:00:03.0: BAR 14: assigned [mem >> 0xf8000000-0xf82fffff] >> [ 5.530098] pci 0000:00:02.0: PCI bridge to [bus 01] >> [ 5.535082] pci 0000:02:00.0: BAR 0: assigned [mem >> 0xf8000000-0xf81fffff 64bit] >> [ 5.542413] pci 0000:02:00.0: BAR 0: error updating (0xf8000004 != >> 0xffffffff) >> [ 5.549652] pci 0000:02:00.0: BAR 0: error updating (high 0x000000 != >> 0xffffffff) >> [ 5.557155] pci 0000:02:00.0: BAR 6: assigned [mem >> 0xf8200000-0xf820ffff pref] >> [ 5.564396] pci 0000:00:03.0: PCI bridge to [bus 02] >> [ 5.569372] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xf82fffff] >> [ 5.576256] pcieport 0000:00:03.0: enabling device (0140 -> 0142) >> >> lspci: >> >> >> [root@alarm alarm]# lspci >> 00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 04) >> 00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 04) >> 02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac >> Wireless Network Adapter (rev ff) > >> >> Thanks! >> >> > >