Return-path: Received: from nm.newmedia-net.de ([217.113.179.122]:36695 "EHLO webmail.newmedia-net.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751497AbcJ3Xns (ORCPT ); Sun, 30 Oct 2016 19:43:48 -0400 To: James Cloos , linux-wireless@vger.kernel.org References: From: Sebastian Gottschall Message-ID: (sfid-20161031_004427_205565_91DE096B) Date: Mon, 31 Oct 2016 00:43:46 +0100 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=iso-8859-15; format=flowed Subject: Re: Backwards 11ac Sender: linux-wireless-owner@vger.kernel.org List-ID: ath10k cannot show tx rates right now in a easy way. since tx rate handling is done by the cards own firmware and not by the mac80211 wireless stack Sebastian Am 30.10.2016 um 21:50 schrieb James Cloos: > I recently received my turris omnia and put it into operation yesterday. > > (It is only doing wireless; I have a different box for my main router.) > > All of the machines on the wlan show backwards transfer speeds; they > upload reasonable fast but downloads are in the kbit/s range. > > That applies to the both the 11ac-capable machines and the 11n-on-2.4 > machines. > > Luci's status/overview page shows 'Bitrate: 6 Mbit/s' for the ath10k and > 'Bitrate: 61.5 Mbit/s' for the ath9k. > > (The two wireless cards in it are: > > 01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01) > 02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter > ) > > Googling has not helped me figure out how to get propper bandwidth. > All of the search results were about wan links, not about wlan links. > > What should I look at to diagnose this? > > -JimC -- Mit freundlichen Gr?ssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Berliner Ring 101, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Gesch?ftsf?hrer: Peter Steinh?user, Christian Scheele http://www.dd-wrt.com email: s.gottschall@dd-wrt.com Tel.: +496251-582650 / Fax: +496251-5826565