Return-path: Received: from mail.neratec.com ([46.140.151.2]:14361 "EHLO mail.neratec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932263AbcKVLFQ (ORCPT ); Tue, 22 Nov 2016 06:05:16 -0500 From: Zefir Kurtisi To: linux-wireless@vger.kernel.org Cc: kvalo@qca.qualcomm.com, michal.kazior@tieto.com, benjamin@sipsolutions.net Subject: [PATCH] ath9k: feed only active spectral / dfs-detector Date: Tue, 22 Nov 2016 12:05:09 +0100 Message-Id: <1479812709-18875-1-git-send-email-zefir.kurtisi@neratec.com> (sfid-20161122_120519_934773_86BB8052) Sender: linux-wireless-owner@vger.kernel.org List-ID: Radar pulse and spectral scan reports are provided by the HW with the ATH9K_RXERR_PHY flag set. Those are forwarded to the dfs-detector and spectral module for further processing. For some older chips, the pre-conditions checked in those modules are ambiguous, since ATH9K_PHYERR_RADAR is used to tag both types. As a result, spectral frames are fed into the dfs-detector and vice versa. This could lead to a false radar detection on a non-DFS channel (which is uncritical), but more relevant it causes useless CPU load for processing invalid frames. This commit ensures that the dfs-detector and spectral collector are only fed when they are active. Signed-off-by: Zefir Kurtisi --- drivers/net/wireless/ath/ath9k/recv.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6697342..48f8af1 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -867,10 +867,21 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, * can be dropped. */ if (rx_stats->rs_status & ATH9K_RXERR_PHY) { - ath9k_dfs_process_phyerr(sc, hdr, rx_stats, rx_status->mactime); - if (ath_cmn_process_fft(&sc->spec_priv, hdr, rx_stats, rx_status->mactime)) + /* + * DFS and spectral are mutually exclusive + * + * Since some chips use PHYERR_RADAR as indication for both, we + * need to double check which feature is enabled to prevent + * feeding spectral or dfs-detector with wrong frames. + */ + if (hw->conf.radar_enabled) { + ath9k_dfs_process_phyerr(sc, hdr, rx_stats, + rx_status->mactime); + } else if (sc->spec_priv.spectral_mode != SPECTRAL_DISABLED && + ath_cmn_process_fft(&sc->spec_priv, hdr, rx_stats, + rx_status->mactime)) { RX_STAT_INC(rx_spectral); - + } return -EINVAL; } -- 2.7.4