Return-path: Received: from nm.newmedia-net.de ([217.113.179.122]:39240 "EHLO webmail.newmedia-net.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751774AbcKEIFO (ORCPT ); Sat, 5 Nov 2016 04:05:14 -0400 To: Ben Greear , yu-chieh kung , Bruno Antunes References: <773DB8A82AB6A046AE0195C68612A31901C5B293@sbs2003.acksys.local> <566849DB.9040901@candelatech.com> <079401d132a6$7e7e2050$7b7a60f0$@acksys.fr> <27f802e7-79c5-a17f-1883-88e62a6520ef@ezplanet.net> <68bd7ebd-b12a-5dbf-a267-5913127718a1@candelatech.com> Cc: Mauro Mozzarelli , "linux-wireless@vger.kernel.org" , OpenWrt Development List , "ath10k@lists.infradead.org" From: Sebastian Gottschall Message-ID: <846c145b-3b15-45ca-249a-040518bc2dad@dd-wrt.com> (sfid-20161105_090554_729478_A82355B3) Date: Sat, 5 Nov 2016 09:05:03 +0100 MIME-Version: 1.0 In-Reply-To: <68bd7ebd-b12a-5dbf-a267-5913127718a1@candelatech.com> Content-Type: text/plain; charset=utf-8; format=flowed Subject: Re: [OpenWrt-Devel] ATH10K VLAN firmware issue Sender: linux-wireless-owner@vger.kernel.org List-ID: would be good if qca can fix this bug finally in all available firmwares. its a very annoying issue since a long time Sebastian Am 04.11.2016 um 23:23 schrieb Ben Greear: > The bug appears that vlan-tx-stripping is unconditionally enabled in > at least my firmware. I have re-compiled w/out that flag set, and it > appears > to work for me. > > Please download this firmware, rename it firmware-2.bin, make sure you > remove/rename > any firmware-5.bin (etc) so mine will load, and see if that fixes your > problem. > > Please note that it is very likely you will have to use same MAC address > for the VLAN devices that the underlying station uses in order for > this to work. > > https://www.candelatech.com/downloads/tmp/firmware-2-full-community.bin > > > Thanks, > Ben > > > On 11/04/2016 02:50 PM, Ben Greear wrote: >> I can reproduce this in my CT firmware. I'll see if I can fix it, >> but for stock firmware, it might be that changing the driver to use >> Ethernet packet type >> of native-wifi would make .1q vlans work. >> >> Thanks, >> Ben >> >> On 11/04/2016 10:28 AM, yu-chieh kung wrote: >>> I met the same problem before, >>> if i modify the 1q header to other value (0xaa00) before go into >>> firmware. >>> I can capture the packet in the air >>> I think the vlan packet is dropped in firmware. >>> >>> 2016-11-04 22:41 GMT+08:00 Bruno Antunes : >>>> On 4 November 2016 at 14:18, Mauro Mozzarelli >>>> wrote: >>>>> Since the capability is implemented in software you might be >>>>> testing the >>>>> limit of your router's CPU i/o speed. >>>> >>>> By loading the module in rawmode? >>>> >>>> The AP is an APU and Sta is an APU2. >>>> >>>>> >>>>> >>>>> >>>>> On 04/11/16 14:13, Bruno Antunes wrote: >>>>>> >>>>>> Hi all, >>>>>> >>>>>> Old thread but I think the issue is still present. >>>>>> >>>>>> I'm running a setup with VLANs with WDS and ath10k cards. >>>>>> >>>>>> To make it work both cards must be loaded in rawmode, AP >>>>>> and Sta, and with no security. >>>>>> >>>>>> I'm using a OpenWrt trunk r49941 and the most recent firmware, >>>>>> 10.2.4.70.58, from Kalle ath10k firmware tree. >>>>>> >>>>>> Although it works the throughput is very bad. >>>>>> Are there any alternatives to improve the throughput. >>>>>> >>>>>> Best Regards, >>>>>> Bruno >>>>>> >>>>>> On 9 December 2015 at 17:24, voncken >>>>>> wrote: >>>>>>> >>>>>>> >>>>>>>> -----Message d'origine----- >>>>>>>> De : Ben Greear [mailto:greearb@candelatech.com] >>>>>>>> Envoyé : mercredi 9 décembre 2015 16:34 >>>>>>>> À : Cedric VONCKEN; ath10k@lists.infradead.org; linux-wireless >>>>>>>> Objet : Re: ATH10K VLAN firmware issue >>>>>>>> >>>>>>>> This only happens when you use STA + WDS, or is .1q broken for >>>>>>>> you in >>>>>>>> other cases as well? >>>>>>> >>>>>>> No, this issue occurs in all modes (STA, STA + WDS, AP). >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> Cedric. >>>>>>> >>>>>>>> Thanks, >>>>>>>> Ben >>>>>>>> >>>>>>>> On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: >>>>>>>>> >>>>>>>>> I'm testing to transmit frame with 802.1q tag (VLAN). >>>>>>>>> >>>>>>>>> My client is set in STA + WDS and the netdev is bridged >>>>>>>>> with eth0. >>>>>>>>> I have a computer with vlan configuration set connected >>>>>>>>> to the STA >>>>>>>>> eth0. >>>>>>>>> >>>>>>>>> If I try to transmit frames with 802.1q tag, the frames >>>>>>>>> are not >>>>>>> >>>>>>> sent. >>>>>>>>> >>>>>>>>> I checked with wireless sniffer, and I don't see the >>>>>>>>> frame with >>>>>>>>> VLAN >>>>>>>>> tag (the frames without VLAN tag are sent). >>>>>>>>> >>>>>>>>> I tested with firmware 10.2.4.70.14-2 from kale github, >>>>>>>>> 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from >>>>>>>>> openwrt, and in all cases I have the same issue. >>>>>>>>> >>>>>>>>> Thanks for your help. >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> To unsubscribe from this list: send the line "unsubscribe >>>>>>>>> linux-wireless" in the body of a message to >>>>>>>>> majordomo@vger.kernel.org >>>>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>>>>>>> >>>>>>>> -- >>>>>>>> Ben Greear >>>>>>>> Candela Technologies Inc http://www.candelatech.com >>>>>>> >>>>>>> -- >>>>>>> To unsubscribe from this list: send the line "unsubscribe >>>>>>> linux-wireless" >>>>>>> in >>>>>>> the body of a message to majordomo@vger.kernel.org >>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>>>> >>>>>> _______________________________________________ >>>>>> openwrt-devel mailing list >>>>>> openwrt-devel@lists.openwrt.org >>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>>> >>>>> _______________________________________________ >>>>> openwrt-devel mailing list >>>>> openwrt-devel@lists.openwrt.org >>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>> >>>> _______________________________________________ >>>> ath10k mailing list >>>> ath10k@lists.infradead.org >>>> http://lists.infradead.org/mailman/listinfo/ath10k >>> >> >> > > -- Mit freundlichen Grüssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Berliner Ring 101, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com email: s.gottschall@dd-wrt.com Tel.: +496251-582650 / Fax: +496251-5826565