Return-path: Received: from mail2.candelatech.com ([208.74.158.173]:49616 "EHLO mail2.candelatech.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752186AbcKOOz1 (ORCPT ); Tue, 15 Nov 2016 09:55:27 -0500 Message-ID: <582B21DD.6000306@candelatech.com> (sfid-20161115_155530_443575_D05B5A56) Date: Tue, 15 Nov 2016 06:55:25 -0800 From: Ben Greear MIME-Version: 1.0 To: voncken CC: linux-wireless@vger.kernel.org, 'OpenWrt Development List' , ath10k@lists.infradead.org Subject: Re: [OpenWrt-Devel] ATH10K VLAN firmware issue References: <773DB8A82AB6A046AE0195C68612A31901C5B293@sbs2003.acksys.local> <566849DB.9040901@candelatech.com> <079401d132a6$7e7e2050$7b7a60f0$@acksys.fr> <27f802e7-79c5-a17f-1883-88e62a6520ef@ezplanet.net> <68bd7ebd-b12a-5dbf-a267-5913127718a1@candelatech.com> <846c145b-3b15-45ca-249a-040518bc2dad@dd-wrt.com> <581DEE2E.3010502@candelatech.com> <001a01d23f4d$cd1df550$6759dff0$@acksys.fr> In-Reply-To: <001a01d23f4d$cd1df550$6759dff0$@acksys.fr> Content-Type: text/plain; charset=UTF-8; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: The beta-18 release on my web page has the fix and should work fine. Probably soon I will promote the beta-18 to final release status. Any help in testing and verifying the beta works well is welcome. Thanks, Ben On 11/15/2016 06:37 AM, voncken wrote: > Hi Ben, > > Do you plan to release a candelatech firmware with this fix? > > Regards. > > Cedric Voncken. >> -----Message d'origine----- >> De : linux-wireless-owner@vger.kernel.org [mailto:linux-wireless- >> owner@vger.kernel.org] De la part de Ben Greear >> Envoyé : samedi 5 novembre 2016 15:35 >> À : Sebastian Gottschall; yu-chieh kung; Bruno Antunes >> Cc : Mauro Mozzarelli; linux-wireless@vger.kernel.org; OpenWrt >> Development List; ath10k@lists.infradead.org >> Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue >> >> Looks to me like 10.4 defaults to the right value, but possibly there >> are other issues with it. I tested my CT 10.4 and it worked OK with >> vlans for me. >> >> Thanks, >> Ben >> >> On 11/05/2016 01:05 AM, Sebastian Gottschall wrote: >>> would be good if qca can fix this bug finally in all available >>> firmwares. its a very annoying issue since a long time >>> >>> Sebastian >>> >>> >>> Am 04.11.2016 um 23:23 schrieb Ben Greear: >>>> The bug appears that vlan-tx-stripping is unconditionally enabled in >>>> at least my firmware. I have re-compiled w/out that flag set, and >> it >>>> appears to work for me. >>>> >>>> Please download this firmware, rename it firmware-2.bin, make sure >>>> you remove/rename any firmware-5.bin (etc) so mine will load, and >> see if that fixes your problem. >>>> >>>> Please note that it is very likely you will have to use same MAC >>>> address for the VLAN devices that the underlying station uses in >> order for this to work. >>>> >>>> https://www.candelatech.com/downloads/tmp/firmware-2-full- >> community.b >>>> in >>>> >>>> >>>> Thanks, >>>> Ben >>>> >>>> >>>> On 11/04/2016 02:50 PM, Ben Greear wrote: >>>>> I can reproduce this in my CT firmware. I'll see if I can fix it, >>>>> but for stock firmware, it might be that changing the driver to use >>>>> Ethernet packet type of native-wifi would make .1q vlans work. >>>>> >>>>> Thanks, >>>>> Ben >>>>> >>>>> On 11/04/2016 10:28 AM, yu-chieh kung wrote: >>>>>> I met the same problem before, >>>>>> if i modify the 1q header to other value (0xaa00) before go into >> firmware. >>>>>> I can capture the packet in the air I think the vlan packet is >>>>>> dropped in firmware. >>>>>> >>>>>> 2016-11-04 22:41 GMT+08:00 Bruno Antunes : >>>>>>> On 4 November 2016 at 14:18, Mauro Mozzarelli >> wrote: >>>>>>>> Since the capability is implemented in software you might be >>>>>>>> testing the limit of your router's CPU i/o speed. >>>>>>> >>>>>>> By loading the module in rawmode? >>>>>>> >>>>>>> The AP is an APU and Sta is an APU2. >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On 04/11/16 14:13, Bruno Antunes wrote: >>>>>>>>> >>>>>>>>> Hi all, >>>>>>>>> >>>>>>>>> Old thread but I think the issue is still present. >>>>>>>>> >>>>>>>>> I'm running a setup with VLANs with WDS and ath10k cards. >>>>>>>>> >>>>>>>>> To make it work both cards must be loaded in rawmode, AP and >>>>>>>>> Sta, and with no security. >>>>>>>>> >>>>>>>>> I'm using a OpenWrt trunk r49941 and the most recent firmware, >>>>>>>>> 10.2.4.70.58, from Kalle ath10k firmware tree. >>>>>>>>> >>>>>>>>> Although it works the throughput is very bad. >>>>>>>>> Are there any alternatives to improve the throughput. >>>>>>>>> >>>>>>>>> Best Regards, >>>>>>>>> Bruno >>>>>>>>> >>>>>>>>> On 9 December 2015 at 17:24, voncken >> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> -----Message d'origine----- >>>>>>>>>>> De : Ben Greear [mailto:greearb@candelatech.com] Envoyé : >>>>>>>>>>> mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; >>>>>>>>>>> ath10k@lists.infradead.org; linux-wireless Objet : Re: ATH10K >>>>>>>>>>> VLAN firmware issue >>>>>>>>>>> >>>>>>>>>>> This only happens when you use STA + WDS, or is .1q broken >>>>>>>>>>> for you in other cases as well? >>>>>>>>>> >>>>>>>>>> No, this issue occurs in all modes (STA, STA + WDS, AP). >>>>>>>>>> >>>>>>>>>> Thanks >>>>>>>>>> >>>>>>>>>> Cedric. >>>>>>>>>> >>>>>>>>>>> Thanks, >>>>>>>>>>> Ben >>>>>>>>>>> >>>>>>>>>>> On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: >>>>>>>>>>>> >>>>>>>>>>>> I'm testing to transmit frame with 802.1q tag (VLAN). >>>>>>>>>>>> >>>>>>>>>>>> My client is set in STA + WDS and the netdev is bridged >> with eth0. >>>>>>>>>>>> I have a computer with vlan configuration set connected >>>>>>>>>>>> to the STA eth0. >>>>>>>>>>>> >>>>>>>>>>>> If I try to transmit frames with 802.1q tag, the frames >>>>>>>>>>>> are not >>>>>>>>>> >>>>>>>>>> sent. >>>>>>>>>>>> >>>>>>>>>>>> I checked with wireless sniffer, and I don't see the >>>>>>>>>>>> frame with VLAN tag (the frames without VLAN tag are sent). >>>>>>>>>>>> >>>>>>>>>>>> I tested with firmware 10.2.4.70.14-2 from kale github, >>>>>>>>>>>> 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 >>>>>>>>>>>> from openwrt, and in all cases I have the same issue. >>>>>>>>>>>> >>>>>>>>>>>> Thanks for your help. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe >>>>>>>>>>>> linux-wireless" in the body of a message to >>>>>>>>>>>> majordomo@vger.kernel.org More majordomo info at >>>>>>>>>>>> http://vger.kernel.org/majordomo-info.html >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Ben Greear Candela Technologies Inc >>>>>>>>>>> http://www.candelatech.com >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe >> linux-wireless" >>>>>>>>>> in >>>>>>>>>> the body of a message to majordomo@vger.kernel.org More >>>>>>>>>> majordomo info at http://vger.kernel.org/majordomo-info.html >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> openwrt-devel mailing list >>>>>>>>> openwrt-devel@lists.openwrt.org >>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt- >> devel >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> openwrt-devel mailing list >>>>>>>> openwrt-devel@lists.openwrt.org >>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>>>>> >>>>>>> _______________________________________________ >>>>>>> ath10k mailing list >>>>>>> ath10k@lists.infradead.org >>>>>>> http://lists.infradead.org/mailman/listinfo/ath10k >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> -- >> Ben Greear >> Candela Technologies Inc http://www.candelatech.com > -- Ben Greear Candela Technologies Inc http://www.candelatech.com