Return-path: Received: from smtp-out05.msg.oleane.net ([62.161.7.3]:50268 "EHLO smtp-out05.msg.oleane.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934246AbcKOSKl (ORCPT ); Tue, 15 Nov 2016 13:10:41 -0500 From: "voncken" To: "'Ben Greear'" Cc: , "'OpenWrt Development List'" , References: <773DB8A82AB6A046AE0195C68612A31901C5B293@sbs2003.acksys.local> <566849DB.9040901@candelatech.com> <079401d132a6$7e7e2050$7b7a60f0$@acksys.fr> <27f802e7-79c5-a17f-1883-88e62a6520ef@ezplanet.net> <68bd7ebd-b12a-5dbf-a267-5913127718a1@candelatech.com> <846c145b-3b15-45ca-249a-040518bc2dad@dd-wrt.com> <581DEE2E.3010502@candelatech.com> In-Reply-To: <581DEE2E.3010502@candelatech.com> Subject: RE: [OpenWrt-Devel] ATH10K VLAN firmware issue Date: Tue, 15 Nov 2016 15:37:32 +0100 Message-ID: <001a01d23f4d$cd1df550$6759dff0$@acksys.fr> (sfid-20161115_191053_342066_B626E902) MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Ben, Do you plan to release a candelatech firmware with this fix? Regards. Cedric Voncken. > -----Message d'origine----- > De : linux-wireless-owner@vger.kernel.org [mailto:linux-wireless- > owner@vger.kernel.org] De la part de Ben Greear > Envoyé : samedi 5 novembre 2016 15:35 > À : Sebastian Gottschall; yu-chieh kung; Bruno Antunes > Cc : Mauro Mozzarelli; linux-wireless@vger.kernel.org; OpenWrt > Development List; ath10k@lists.infradead.org > Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue > > Looks to me like 10.4 defaults to the right value, but possibly there > are other issues with it. I tested my CT 10.4 and it worked OK with > vlans for me. > > Thanks, > Ben > > On 11/05/2016 01:05 AM, Sebastian Gottschall wrote: > > would be good if qca can fix this bug finally in all available > > firmwares. its a very annoying issue since a long time > > > > Sebastian > > > > > > Am 04.11.2016 um 23:23 schrieb Ben Greear: > >> The bug appears that vlan-tx-stripping is unconditionally enabled in > >> at least my firmware. I have re-compiled w/out that flag set, and > it > >> appears to work for me. > >> > >> Please download this firmware, rename it firmware-2.bin, make sure > >> you remove/rename any firmware-5.bin (etc) so mine will load, and > see if that fixes your problem. > >> > >> Please note that it is very likely you will have to use same MAC > >> address for the VLAN devices that the underlying station uses in > order for this to work. > >> > >> https://www.candelatech.com/downloads/tmp/firmware-2-full- > community.b > >> in > >> > >> > >> Thanks, > >> Ben > >> > >> > >> On 11/04/2016 02:50 PM, Ben Greear wrote: > >>> I can reproduce this in my CT firmware. I'll see if I can fix it, > >>> but for stock firmware, it might be that changing the driver to use > >>> Ethernet packet type of native-wifi would make .1q vlans work. > >>> > >>> Thanks, > >>> Ben > >>> > >>> On 11/04/2016 10:28 AM, yu-chieh kung wrote: > >>>> I met the same problem before, > >>>> if i modify the 1q header to other value (0xaa00) before go into > firmware. > >>>> I can capture the packet in the air I think the vlan packet is > >>>> dropped in firmware. > >>>> > >>>> 2016-11-04 22:41 GMT+08:00 Bruno Antunes : > >>>>> On 4 November 2016 at 14:18, Mauro Mozzarelli > wrote: > >>>>>> Since the capability is implemented in software you might be > >>>>>> testing the limit of your router's CPU i/o speed. > >>>>> > >>>>> By loading the module in rawmode? > >>>>> > >>>>> The AP is an APU and Sta is an APU2. > >>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> On 04/11/16 14:13, Bruno Antunes wrote: > >>>>>>> > >>>>>>> Hi all, > >>>>>>> > >>>>>>> Old thread but I think the issue is still present. > >>>>>>> > >>>>>>> I'm running a setup with VLANs with WDS and ath10k cards. > >>>>>>> > >>>>>>> To make it work both cards must be loaded in rawmode, AP and > >>>>>>> Sta, and with no security. > >>>>>>> > >>>>>>> I'm using a OpenWrt trunk r49941 and the most recent firmware, > >>>>>>> 10.2.4.70.58, from Kalle ath10k firmware tree. > >>>>>>> > >>>>>>> Although it works the throughput is very bad. > >>>>>>> Are there any alternatives to improve the throughput. > >>>>>>> > >>>>>>> Best Regards, > >>>>>>> Bruno > >>>>>>> > >>>>>>> On 9 December 2015 at 17:24, voncken > wrote: > >>>>>>>> > >>>>>>>> > >>>>>>>>> -----Message d'origine----- > >>>>>>>>> De : Ben Greear [mailto:greearb@candelatech.com] Envoyé : > >>>>>>>>> mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; > >>>>>>>>> ath10k@lists.infradead.org; linux-wireless Objet : Re: ATH10K > >>>>>>>>> VLAN firmware issue > >>>>>>>>> > >>>>>>>>> This only happens when you use STA + WDS, or is .1q broken > >>>>>>>>> for you in other cases as well? > >>>>>>>> > >>>>>>>> No, this issue occurs in all modes (STA, STA + WDS, AP). > >>>>>>>> > >>>>>>>> Thanks > >>>>>>>> > >>>>>>>> Cedric. > >>>>>>>> > >>>>>>>>> Thanks, > >>>>>>>>> Ben > >>>>>>>>> > >>>>>>>>> On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: > >>>>>>>>>> > >>>>>>>>>> I'm testing to transmit frame with 802.1q tag (VLAN). > >>>>>>>>>> > >>>>>>>>>> My client is set in STA + WDS and the netdev is bridged > with eth0. > >>>>>>>>>> I have a computer with vlan configuration set connected > >>>>>>>>>> to the STA eth0. > >>>>>>>>>> > >>>>>>>>>> If I try to transmit frames with 802.1q tag, the frames > >>>>>>>>>> are not > >>>>>>>> > >>>>>>>> sent. > >>>>>>>>>> > >>>>>>>>>> I checked with wireless sniffer, and I don't see the > >>>>>>>>>> frame with VLAN tag (the frames without VLAN tag are sent). > >>>>>>>>>> > >>>>>>>>>> I tested with firmware 10.2.4.70.14-2 from kale github, > >>>>>>>>>> 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 > >>>>>>>>>> from openwrt, and in all cases I have the same issue. > >>>>>>>>>> > >>>>>>>>>> Thanks for your help. > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> -- > >>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe > >>>>>>>>>> linux-wireless" in the body of a message to > >>>>>>>>>> majordomo@vger.kernel.org More majordomo info at > >>>>>>>>>> http://vger.kernel.org/majordomo-info.html > >>>>>>>>>> > >>>>>>>>> -- > >>>>>>>>> Ben Greear Candela Technologies Inc > >>>>>>>>> http://www.candelatech.com > >>>>>>>> > >>>>>>>> -- > >>>>>>>> To unsubscribe from this list: send the line "unsubscribe > linux-wireless" > >>>>>>>> in > >>>>>>>> the body of a message to majordomo@vger.kernel.org More > >>>>>>>> majordomo info at http://vger.kernel.org/majordomo-info.html > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> openwrt-devel mailing list > >>>>>>> openwrt-devel@lists.openwrt.org > >>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt- > devel > >>>>>> > >>>>>> _______________________________________________ > >>>>>> openwrt-devel mailing list > >>>>>> openwrt-devel@lists.openwrt.org > >>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >>>>> > >>>>> _______________________________________________ > >>>>> ath10k mailing list > >>>>> ath10k@lists.infradead.org > >>>>> http://lists.infradead.org/mailman/listinfo/ath10k > >>>> > >>> > >>> > >> > >> > > > > > > -- > Ben Greear > Candela Technologies Inc http://www.candelatech.com