Return-path: Received: from mx0a-0016f401.pphosted.com ([67.231.148.174]:55806 "EHLO mx0b-0016f401.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751870AbcKUHHd (ORCPT ); Mon, 21 Nov 2016 02:07:33 -0500 From: Amitkumar Karwar To: Wolfram Sang CC: "linux-wireless@vger.kernel.org" , "Nishant Sarmukadam" , Kalle Valo Subject: RE: Problems getting mwifiex with sd8887 to work Date: Mon, 21 Nov 2016 07:07:26 +0000 Message-ID: <915ae2d7b20d455d86a574c562dfd5fe@SC-EXCH04.marvell.com> (sfid-20161121_080736_867411_28112DDE) References: <20161110175915.GB1585@katana> <507fff29bd2048c2b2295beb451943b5@SC-EXCH04.marvell.com> <20161113141348.GA32086@katana> In-Reply-To: <20161113141348.GA32086@katana> Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Wolfram, > From: Wolfram Sang [mailto:wsa@the-dreams.de] > Sent: Sunday, November 13, 2016 7:44 PM > To: Amitkumar Karwar > Cc: linux-wireless@vger.kernel.org; Nishant Sarmukadam; Kalle Valo > Subject: Re: Problems getting mwifiex with sd8887 to work > > > 0x242 command failure is expected for sd8887, as It's not supported. > > Is the same true for 0x10f? > > mwifiex_sdio mmc2:0001:1: CMD_RESP: cmd 0x10f error, result=0x2 > > Otherwise I can connect to the network and run performance tests now. Error code 2 from firmware is unsupported command. You can ignore this and earlier error seen for 0x242 command. They aren't harmful. Regards, Amitkumar