Return-path: Received: from mail-oi0-f46.google.com ([209.85.218.46]:33422 "EHLO mail-oi0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750818AbcLUPW3 (ORCPT ); Wed, 21 Dec 2016 10:22:29 -0500 Received: by mail-oi0-f46.google.com with SMTP id 128so17372791oig.0 for ; Wed, 21 Dec 2016 07:22:29 -0800 (PST) MIME-Version: 1.0 In-Reply-To: References: From: Matteo Grandi Date: Wed, 21 Dec 2016 16:21:48 +0100 Message-ID: (sfid-20161221_162233_464850_82D7B82C) Subject: Re: ath10k mesh error 80MHz channel To: LinuxWireless Mailing List Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi all again, just an update to the previous message: looking at iw list I found this situation: Frequencies: * 5180 MHz [36] (20.0 dBm) * 5200 MHz [40] (20.0 dBm) * 5220 MHz [44] (20.0 dBm) * 5240 MHz [48] (20.0 dBm) * 5260 MHz [52] (20.0 dBm) (no IR, radar detection) * 5280 MHz [56] (20.0 dBm) (no IR, radar detection) * 5300 MHz [60] (20.0 dBm) (no IR, radar detection) * 5320 MHz [64] (20.0 dBm) (no IR, radar detection) * 5500 MHz [100] (23.0 dBm) (no IR, radar detection) * 5520 MHz [104] (23.0 dBm) (no IR, radar detection) * 5540 MHz [108] (23.0 dBm) (no IR, radar detection) * 5560 MHz [112] (23.0 dBm) (no IR, radar detection) * 5580 MHz [116] (23.0 dBm) (no IR, radar detection) * 5600 MHz [120] (23.0 dBm) (no IR, radar detection) * 5620 MHz [124] (23.0 dBm) (no IR, radar detection) * 5640 MHz [128] (23.0 dBm) (no IR, radar detection) * 5660 MHz [132] (23.0 dBm) (no IR, radar detection) * 5680 MHz [136] (23.0 dBm) (no IR, radar detection) * 5700 MHz [140] (23.0 dBm) (no IR, radar detection) * 5745 MHz [149] (disabled) * 5765 MHz [153] (disabled) * 5785 MHz [157] (disabled) * 5805 MHz [161] (disabled) * 5825 MHz [165] (disabled) Supported commands: * new_interface * set_interface * new_key The no Initial Radiation prevent the interface to start transmitting. I'm almost sure that it's a regulatory domain issue, but i already tried to reinstall the CRD Agent, and even changing the regulatory domain it change only the global (i.e. CH) while the iw list provide the same results. root@MrProper:~# iw reg get global country CH: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS (57000 - 66000 @ 2160), (N/A, 40), (N/A) phy#1 country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#2 country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) Is there a way to remove the no IR flags in the allowed channels? Thanks a lot again Matteo 2016-12-21 15:19 GMT+01:00 Matteo Grandi : > Dear all, > > I'm configuring a simple mesh network using four miniPCIe adapters > (Compex WLE900VX) on two Gateworks Ventana 5410 boards. > Actually, based on the guide > https://wireless.wiki.kernel.org/en/users/drivers/ath10k/mesh > I don't have any problem setting up the mesh network on channels 36, > 149, 153, respectively 5180 80 5210, 5745 80 5775, and 5765 80 5795 > (even if MIMO is not working). > > But while configuring the interfaces to work in 80MHz channel > bandwidth (802.11ac using ath10k driver) on a different channel I > bump into the error: > > command failed: Invalid argument (-22) > > immediately after launching the command for joining the mesh: iw dev > mesh join . > > The syslog provide only this: > > Dec 21 13:52:03 MrProper kernel: [ 7257.058617] util.c | > ieee80211_set_wmm_default: ac=0, enable_qos=true, vif.type=7, > NL80211_IFTYPE_STATION=2 > Dec 21 13:52:03 MrProper kernel: [ 7257.059654] IPv6: > ADDRCONF(NETDEV_UP): mpp1: link is not ready > Dec 21 13:52:03 MrProper kernel: [ 7257.205911] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:03 MrProper kernel: [ 7257.581898] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:03 MrProper kernel: [ 7257.613627] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:04 MrProper kernel: [ 7258.084733] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:04 MrProper kernel: [ 7258.180963] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:04 MrProper kernel: [ 7258.325382] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:04 MrProper kernel: [ 7258.661534] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:05 MrProper kernel: [ 7259.029525] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:05 MrProper kernel: [ 7259.392563] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:08 MrProper kernel: [ 7262.386101] ath10k_warn: 18 > callbacks suppressed > Dec 21 13:52:08 MrProper kernel: [ 7262.386154] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7262.737520] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7262.785597] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7262.971144] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7262.981414] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7263.091578] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7263.445603] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7263.458727] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7263.582180] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:09 MrProper kernel: [ 7263.589649] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:14 MrProper kernel: [ 7267.742838] ath10k_warn: 44 > callbacks suppressed > Dec 21 13:52:14 MrProper kernel: [ 7267.742887] ath10k_pci > 0000:07:00.0: no channel configured; ignoring frame(s)! > Dec 21 13:52:14 MrProper kernel: [ 7267.744466] ath10k_pci > 0000:07:00.0: no channel > > Did someone have a similar issue? > Are there, maybe, some channels that even present in the regulatory > domain with the @80 flags are not configurable in this way? (36, 52, > 100, 116, 132, 149 should be ok, but only 36 and 149 work) > Or maybe it's my reg-domain issue (see below)? > > root@MrProper:~# iw reg get > global > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > phy#1 > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > phy#0 > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > phy#2 > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > > Thanks a lot for every hint! > > Matteo