Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]:38566 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752311AbcL2OgB (ORCPT ); Thu, 29 Dec 2016 09:36:01 -0500 Date: Thu, 29 Dec 2016 20:05:00 +0530 From: Mohammed Shafi Shajakhan To: Christian Lamparter Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org, Kalle Valo , michal.kazior@tieto.com Subject: Re: [PATCH] ath10k: merge extended peer info data with existing peers info Message-ID: <20161229143459.GA3566@atheros-ThinkPad-T61> (sfid-20161229_153621_243297_D0145672) References: <20161216052418.GA8936@atheros-ThinkPad-T61> <2696316.Ugl5Pim1oL@debian64> <20161222154801.GA16241@atheros-ThinkPad-T61> <1563376.k5ulprKP3Z@debian64> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1563376.k5ulprKP3Z@debian64> Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Christian, On Thu, Dec 22, 2016 at 06:58:41PM +0100, Christian Lamparter wrote: > Hello Shafi, > > On Thursday, December 22, 2016 9:18:01 PM CET Mohammed Shafi Shajakhan wrote: > > > On Monday, December 19, 2016 10:19:57 PM CET Mohammed Shafi Shajakhan wrote: > > > > On Sat, Dec 17, 2016 at 06:46:34PM +0100, Christian Lamparter wrote: > > > > > The 10.4 firmware adds extended peer information to the > > > > > firmware's statistics payload. This additional info is > > > > > stored as a separate data field. During review of > > > > > "ath10k: add accounting for the extended peer statistics" [0] > > > > > > > > > > Mohammed Shafi Shajakhan commented that the extended peer statistics > > > > > lists are of little use:"... there is not much use in appending > > > > > the extended peer stats (which gets periodically updated) to the > > > > > linked list '&ar->debug.fw_stats.peers_extd)' and should we get > > > > > rid of the below (and the required cleanup as well) > > > > > > > > > > list_splice_tail_init(&stats.peers_extd, > > > > > &ar->debug.fw_stats.peers_extd); > > > > > > > > > > since rx_duration is getting updated periodically to the per sta > > > > > information." > > > > > > > > > > This patch replaces the extended peers list with a lookup and > > > > > puts the retrieved data (rx_duration) into the existing > > > > > ath10k_fw_stats_peer entry that was created earlier. > > > > > > > > [shafi] Its good to maintain the extended stats variable > > > > and retain the two different functions to update rx_duration. > > > > > > > > a) extended peer stats supported - mainly for 10.4 > > > > b) extender peer stats not supported - for 10.2 > > > Well, I have to ask why you want to retain the two different > > > functions to update the same arsta->rx_duration? I think a > > > little bit of code that helps to explain what's on your mind > > > (or how you would do it) would help immensely in this case. > > > Since I have the feeling that this is the problem here. > > > So please explain it in C(lang). > > > > [shafi] I see you prefer to stuff the 'rx_duration' from > > the extended stats to the existing global 'ath10k_peer_stats' > > The idea of extended stats is, ideally its not going to stop > > for 'rx_duration' . Extended stats is maintained as a seperate > > list / entry for addition of new fields as well > I'm guessing you are trying to say here: > > replace: > > dst->rx_duration = __le32_to_cpu(src->rx_duration); > > with > > dst->rx_duration += __le32_to_cpu(src->rx_duration); > > in ath10k_wmi_10_4_op_pull_fw_stats()? [shafi] oh no sorry, I am trying to say more members related to stats shall be added in extended stats structure . The extended stats structure is specifically introduced for adding more stats related variables. > > Is this correct? If so then can you tell me why ath10k_wmi_10_4_op_pull_fw_stats() > is using for (i = 0; i < num_peer_stats; i++) to iterate over the extended peer > stats instead of looking up the number of extended peer items. Because this does > imply that there are the "same" (and every peer stat has a matching extended > peer stat)... (This will be important for the comment below - so ***). > Of course, if this isn't true then this is a bug and should be fixed because > otherwise the ath10k_wmi_10_4_op_pull_fw_stats functions might return -EPROTO > at some point which causes a "failed to pull fw stats: -71" and unprocessed/lost > stats. [shafi] sorry i am not sure I got you, have you come across this error, please let me know ? > > > > > > > > [0] > > > > > Cc: Mohammed Shafi Shajakhan > > > > > Signed-off-by: Christian Lamparter > > > > > --- > > > > > drivers/net/wireless/ath/ath10k/core.h | 2 -- > > > > > drivers/net/wireless/ath/ath10k/debug.c | 17 -------------- > > > > > drivers/net/wireless/ath/ath10k/debugfs_sta.c | 32 ++----------------------- > > > > > drivers/net/wireless/ath/ath10k/wmi.c | 34 ++++++++++++++++++++------- > > > > > 4 files changed, 28 insertions(+), 57 deletions(-) > > > > > > > > > > diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h > > > > > index 09ff8b8a6441..3fffbbb18c25 100644 > > > > > --- a/drivers/net/wireless/ath/ath10k/core.h > > > > > +++ b/drivers/net/wireless/ath/ath10k/core.h > > > > > @@ -268,11 +268,9 @@ struct ath10k_fw_stats_pdev { > > > > > }; > > > > > > > > > > struct ath10k_fw_stats { > > > > > - bool extended; > > > > > struct list_head pdevs; > > > > > struct list_head vdevs; > > > > > struct list_head peers; > > > > > - struct list_head peers_extd; > > > > > }; > > > > > > > > > > #define ATH10K_TPC_TABLE_TYPE_FLAG 1 > > > > > diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c > > > > > index 82a4c67f3672..89f7fde77cdf 100644 > > > > > --- a/drivers/net/wireless/ath/ath10k/debug.c > > > > > +++ b/drivers/net/wireless/ath/ath10k/debug.c > > > > > @@ -315,25 +315,13 @@ static void ath10k_fw_stats_peers_free(struct list_head *head) > > > > > } > > > > > } > > > > > > > > > > -static void ath10k_fw_extd_stats_peers_free(struct list_head *head) > > > > > -{ > > > > > - struct ath10k_fw_extd_stats_peer *i, *tmp; > > > > > - > > > > > - list_for_each_entry_safe(i, tmp, head, list) { > > > > > - list_del(&i->list); > > > > > - kfree(i); > > > > > - } > > > > > -} > > > > > - > > > > > static void ath10k_debug_fw_stats_reset(struct ath10k *ar) > > > > > { > > > > > spin_lock_bh(&ar->data_lock); > > > > > ar->debug.fw_stats_done = false; > > > > > - ar->debug.fw_stats.extended = false; > > > > > > > > [shafi] this looks fine, but not removing the 'extended' variable > > > > from ath10k_fw_stats structure, I see the design for 'rx_duration' > > > > arguably some what convoluted ! > > > I removed extended because it is now a write-only variable. > > > So I figured, there's no point in keeping it around? I don't have > > > access to the firmware interface documentation, so I don't know > > > if there's a reason why it would be good to have it later. > > > So please tell me, what information do we gain from it? [shafi] sorry this is purely ath10k specific nothing to map with the firmware > > > > [shafi] while parsing the stats from 'wmi' we clearly mark there whether > > the extended stats is available (or) not and if its there parse it and > > deal with it seperately > No, there's no difference between stats or extended stats (10.2.4 vs 10.4): > both ath10k_sta_update_extd_stats_rx_duration() [0] > and ath10k_sta_update_stats_rx_duration() [1] are adding the > ath10k_fw_stats_peer(_extd)->rx_duration to ath10k_sta->rx_duration. > > With the merge of the peer stats and extended peer stats, this also > removed the only usage of stats->extended. And hence it becomes a > write-only variable. So there's no point in keeping it around ATM (as > all other extended peer stats entries aren't used). [shafi] ok, I see the extended stats structure is introduced for 10.4 and i was thinking its good to have two seperate API's for updating the rx_duration .. > > > > > *We get periodic events from firmware updating 'ath10k_debug_fw_stats_process' > > > > *Fetch rx_duration from 'ath10k_wmi_pull_fw_stats(ar, skb, &stats)' > > > > {certainly 'stats' object is for this particular update only, and freed > > > > up later) > > > > *Update immediately using 'ath10k_sta_update_rx_duration' > > > > > > > > 'ath10k_wmi_pull_fw_stats' has a slightly different implementation > > > > for 10.2 and 10.4 (the later supporting extended peer stats) > > > > > > I see that 10.2.4's ath10k_wmi_10_2_4_op_pull_fw_stats() > > > passes the rx_duration as part of the wmi_10_2_4_ext_peer_stats > > > element which is basically a carbon-copy of wmi_10_2_4_peer_stats > > > (but with one extra __le32 for the rx_duration at the end.) > > > This rx_duration is then used to set the rx_duration field in the > > > generated ath10k_fw_stats_peer struct. [shafi] ok > > > > > > 10.4's ath10k_wmi_10_4_op_pull_fw_stats() has a "fixed" wmi_10_4_peer_stats > > > element and uses an separate "fixed" wmi_10_4_peer_extd_stats element for > > > the communicating the rx_duration to the driver. [shafi] ok > > > > > > Thing is, both function have the same signature. They produce the same > > > struct ath10k_fw_stats_peer for the given data in the sk_buff input. So > > > why does 10.4 need to have it's peer_extd infrastructure, when it can use > > > the existing rx_duration field in the *universal* ath10k_fw_stats_peer? > > > > [shafi] agreed we need to fix that, it would have been easier if 10.2.4 > > and 10.4 had the same definitions. > Ok, I don't know the internals of the firmware to know what's the difference > between 10.2.4 and 10.4's rx_duration (how both firmwares define them > differently in this context) ? From what I can tell, it's just that > the entry has moved from the peer stats to extended peer stats. > Of course, this is based on the logic that both 10.2.4 and 10.4 rx_durations > end up being added to arsta->rx_duration in the same way. There's no scaling > or a comment that would indicate a difference. [shafi] ok > > > > > > > What's with the extra layers / HAL here? Because it looks like it's merged > > > back together in the same manner into the same arsta->rx_duration? > > > [ath10k_sta_update_stats_rx_duration() vs. > > > ath10k_sta_update_extd_stats_rx_duration() - they are almost carbon copies too] [shafi] my concern was for updating 'rx_duration' we just iterate over the list and update the same. > > > > > > > > diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c > > > > > index c893314a191f..c7ec7b9e9b55 100644 > > > > > --- a/drivers/net/wireless/ath/ath10k/wmi.c > > > > > +++ b/drivers/net/wireless/ath/ath10k/wmi.c > > > > > @@ -3044,23 +3044,41 @@ static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar, > > > > > if ((stats_id & WMI_10_4_STAT_PEER_EXTD) == 0) > > > > > return 0; > > > > > > > > > > - stats->extended = true; > > > > > - > > > > > for (i = 0; i < num_peer_stats; i++) { > > > > > const struct wmi_10_4_peer_extd_stats *src; > > > > > - struct ath10k_fw_extd_stats_peer *dst; > > > > > + struct ath10k_fw_stats_peer *dst; > > > > > > > > > > src = (void *)skb->data; > > > > > if (!skb_pull(skb, sizeof(*src))) > > > > > return -EPROTO; > > > > > > > > > > - dst = kzalloc(sizeof(*dst), GFP_ATOMIC); > > > > > - if (!dst) > > > > > - continue; > > > > > + /* Because the stat data may exceed htc-wmi buffer > > > > > + * limit the firmware might split the stats data > > > > > + * and delivers it in multiple update events. > > > > > + * if we can't find the entry in the current event > > > > > + * payload, we have to look in main list as well. > > > > > + */ > > > > [shafi] thanks ! sorry i might have missed this bug, did you happen > > to see this condition being hit ? > This was copied from ath10k_debug_fw_stats_process() [2]. I've added Michal > Kazior to the discussion since his patch "ath10k: fix fw stats processing" > added this in debug.c. I think he knows the firmware internals well enough > to tell if this is a problem or not. As it stands now, it is and will be > in the future. [shafi] sure. > > > > > > + list_for_each_entry(dst, &stats->peers, list) { > > > > > + if (ether_addr_equal(dst->peer_macaddr, > > > > > + src->peer_macaddr.addr)) > > > > > + goto found; > > > > > + } > > > > > + > > > > [shafi] Again, we can simply cache the macaddress and rx_duration > > and deal with it later, rather than doing the whole lookup here ? > > Will it be an overhead for large number of clients ? > Well, show me how you would do it more efficiently otherwise? I don't > see how you can cache the macaddress and rx_duration since you are > basically forced to process all the peer stats first and later all > the extended peer stats. They don't mix. [shafi] hmmm, ok. > > As for how expensive it is: From what I can tell, the 10.4 firmware > sends the stat events every few seconds. So they are not part of any > rx or tx hot-paths. The list_for_each within the for > (i = 0; i < num_peers;i++) is actually in the O(1) class as far > as both loops go. This might sound funny at first, but the number of > extended peer list is limited by TARGET_10_4_MAX_PEER_EXT_STATS to 16. > And thanks to (***) the limit of num_peers is also 16. Furthermore > we can add a if (ath10k_peer_stats_enabled(ar)) guard to skip it > entirely if the stats are disabled. [shafi] ok. > > > > > > > +#ifdef CONFIG_ATH10K_DEBUGFS > > > > > + list_for_each_entry(dst, &ar->debug.fw_stats.peers, list) { > > > > > + if (ether_addr_equal(dst->peer_macaddr, > > > > > + src->peer_macaddr.addr)) > > > > > + goto found; > > > > > + } > > > > > +#endif > > > > [shafi] again, this could be handled seperately. > This is more expensive. As fw_stats.peers can contain more entries than 16. > However, this might be unnecessary if both peers and extended peers stats > entries in the wmi event are always for the same stations. [shafi] ok > > Note: There's an alternative way too. Instead of writing rx_duration into > ath10k_fw_stats, we could skip the middle man write it directly into > arsta->rx_duration. This would also mean that we can get rid of > ath10k_sta_update_extd_stats_rx_duration(), ath10k_sta_update_stats_rx_duration() > and ath10k_sta_update_rx_duration(). This has the benifit that we can > remove even more. > > > > > > + > > > > > + ath10k_dbg(ar, ATH10K_DBG_WMI, > > > > > + "Orphaned extended stats entry for station %pM.\n", > > > > > + src->peer_macaddr.addr); > > > > > + continue; > > > > > > > > > > - ether_addr_copy(dst->peer_macaddr, src->peer_macaddr.addr); > > > > > +found: > > > > > dst->rx_duration = __le32_to_cpu(src->rx_duration); > > > > > - list_add_tail(&dst->list, &stats->peers_extd); > > > > > } > > > > > > > > > > return 0; > > > > > > > > [shafi] Yes i am bit concerned about this change making 10.4 to update > > > > over the existing peer_stats structure, the idea is to maintain uniformity > > > > between the structures shared between ath10k and its corresponding to avoid > > > > confusion/ bugs in the future. Kindly let me know your thoughts, feel free > > > > to correct me if any of my analysis is incorrect. thank you ! > > > Isn't the point of the ath10k_wmi_10_*_op_pull_fw_stats() functions to make > > > a "universal" statistic (in your case a unified ath10k_fw_stats_peer structure) > > > that other functions can use, without caring about if the FW was 10.4 > > > or 10.2.4? > > > > > > There's no indication that the rx_duration field in wmi_10_2_4_ext_peer_stats > > > conveys any different information than the rx_duration in > > > wmi_10_4_peer_extd_stats. So, what's going on here? Can't you just make > > > wmi_10_4_peer_extd_stats's rx_duration use the existing field in > > > ath10k_fw_stats_peer? And if not: why exactly? > > > > > [shafi] I will soon test your change and keep you posted. We will also > > get Kalle's take/view on this. > Ok. That said, I added him to the CC from the beginning and so far > he silently agreed. [shafi] sure, I guess i quickly tested this change and I found things are fine, it would be good if you can share your test results as well please Yes we can discuss with Kalle and Michal ! If you guys think this is a more optimized version of updating the peer stats, I am fine with that as well. There is no doubt you guys know about open source better than me :-) > > Regards, > Christian > > [0] > [1] > [2] > >