Return-path: Received: from mail-pf0-f178.google.com ([209.85.192.178]:34252 "EHLO mail-pf0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750975AbdAMFWX (ORCPT ); Fri, 13 Jan 2017 00:22:23 -0500 Received: by mail-pf0-f178.google.com with SMTP id 127so24910540pfg.1 for ; Thu, 12 Jan 2017 21:22:22 -0800 (PST) From: Matt Ranostay To: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, devicetree@vger.kernel.org Cc: tony@atomide.com, Matt Ranostay Subject: [PATCH v2 1/2] devicetree: document vmmc-supply and mmc-pwrseq options Date: Thu, 12 Jan 2017 21:22:17 -0800 Message-Id: <20170113052218.10534-2-matt@ranostay.consulting> (sfid-20170113_062238_908611_7EA1AC38) In-Reply-To: <20170113052218.10534-1-matt@ranostay.consulting> References: <20170113052218.10534-1-matt@ranostay.consulting> Sender: linux-wireless-owner@vger.kernel.org List-ID: Cc: devicetree@vger.kernel.org Signed-off-by: Matt Ranostay --- Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 980b16df74c3..0854451ff91d 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -1,4 +1,4 @@ -Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices +Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices ------ This node provides properties for controlling the Marvell SDIO/PCIE wireless device. @@ -8,6 +8,7 @@ connects the device to the system. Required properties: - compatible : should be one of the following: + * "marvell,sd8787" * "marvell,sd8897" * "marvell,sd8997" * "pci11ab,2b42" @@ -34,6 +35,9 @@ Optional properties: so that the wifi chip can wakeup host platform under certain condition. during system resume, the irq will be disabled to make sure unnecessary interrupt is not received. + - vmmc-supply: a phandle of a regulator, supplying VCC to the card + - mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*" + for documentation of MMC power sequence bindings. Example: @@ -46,6 +50,7 @@ so that firmware can wakeup host using this device side pin. &mmc3 { status = "okay"; vmmc-supply = <&wlan_en_reg>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; cap-power-off-card; keep-power-in-suspend; -- 2.10.2