Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:4995 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932570AbdBVPci (ORCPT ); Wed, 22 Feb 2017 10:32:38 -0500 From: Mohammed Shafi Shajakhan To: CC: , , "Mohammed Shafi Shajakhan" Subject: [PATCH] ath10k: Disallow DFS simulation if DFS channel is not enabled Date: Wed, 22 Feb 2017 21:03:11 +0530 Message-ID: <1487777591-29743-1-git-send-email-mohammed@qca.qualcomm.com> (sfid-20170222_163242_196941_DCB52AC0) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Mohammed Shafi Shajakhan If DFS is not enabled in hostapd (ieee80211h=0) DFS channels shall not be available for use even though the hardware may have the capability to support DFS. With this configuration (DFS disabled in hostapd) trying to bring up ath10k device in DFS channel for AP mode fails and trying to simulate DFS in ath10k debugfs results in a warning in cfg80211 complaining invalid channel and this should be avoided in the driver itself rather than false propogating RADAR detection to mac80211/cfg80211. Fix this by checking for the first vif 'is_started' state(should work for client mode as well) as all the vifs shall be configured for the same channel sys/kernel/debug/ieee80211/phy1/ath10k# echo 1 > dfs_simulate_radar WARNING: at net/wireless/chan.c:265 cfg80211_radar_event+0x24/0x60 Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211] [] (warn_slowpath_null) from [] (cfg80211_radar_event+0x24/0x60 [cfg80211]) [] (cfg80211_radar_event [cfg80211]) from [] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211]) [] (ieee80211_dfs_radar_detected_work [mac80211]) from [] (process_one_work+0x20c/0x32c) WARNING: at net/wireless/nl80211.c:2488 nl80211_get_mpath+0x13c/0x4cc Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211] [] (warn_slowpath_null) from [] (cfg80211_radar_event+0x24/0x60 [cfg80211]) [] (cfg80211_radar_event [cfg80211]) from [] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211]) [] (ieee80211_dfs_radar_detected_work [mac80211]) from [] (process_one_work+0x20c/0x32c) Signed-off-by: Mohammed Shafi Shajakhan --- [thanks Kalle, Jouni and Tamizh for the first level review] drivers/net/wireless/ath/ath10k/debug.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index fb0ade3..ac9090b 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -1997,6 +1997,15 @@ static ssize_t ath10k_write_simulate_radar(struct file *file, size_t count, loff_t *ppos) { struct ath10k *ar = file->private_data; + struct ath10k_vif *arvif; + + /* Just check for for the first vif alone, as all the vifs will be + * sharing the same channel and if the channel is disabled, all the + * vifs will share the same 'is_started' state. + */ + arvif = list_first_entry(&ar->arvifs, typeof(*arvif), list); + if (!arvif->is_started) + return -EINVAL; ieee80211_radar_detected(ar->hw); -- 1.9.1