Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]:35800 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S940478AbdDTIwE (ORCPT ); Thu, 20 Apr 2017 04:52:04 -0400 From: Kalle Valo To: Ryan Hsu CC: "linux-wireless@vger.kernel.org" , "ath10k@lists.infradead.org" Subject: Re: ath10k: ath10k: bump up FW API to 6 Date: Thu, 20 Apr 2017 08:52:00 +0000 Message-ID: <87fuh35umo.fsf@kamboji.qca.qualcomm.com> (sfid-20170420_105209_320776_D361E75F) References: <1491944688-5795-1-git-send-email-ryanhsu@qca.qualcomm.com> <8a9bab5f36e8456bafa8d872012bcf3a@euamsexm01a.eu.qualcomm.com> In-Reply-To: <8a9bab5f36e8456bafa8d872012bcf3a@euamsexm01a.eu.qualcomm.com> (Kalle Valo's message of "Wed, 19 Apr 2017 16:07:07 +0200") Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Kalle Valo writes: > ryanhsu@qti.qualcomm.com wrote: >> From: Ryan Hsu >>=20 >> For QCA6174 hw3.0, since WLAN.RM.4.4-00022-QCARMSWPZ-2, it starts to >> support the board ID information from otp, with some devices released on >> the market that didn't calibrated with OTP, will have 0 for board ID >> information, which cause the backward compatibility issue and was fixed >> in commit 'd2e202c06ca4 ("ath10k: ignore configuring the incorrect board= _id")' >>=20 >> So bump the fw api version to differentiate the latest firmware support. >>=20 >> Signed-off-by: Ryan Hsu > > Patch applied to ath-next branch of ath.git, thanks. > > aad1fd7f7677 ath10k: bump up FW API to 6 And I renamed the RM.4.4 firmware image also: https://github.com/kvalo/ath10k-firmware/commit/da1564dafe1c8175faf694482d1= 649f56229ae96 --=20 Kalle Valo=