Return-path: Received: from out4-smtp.messagingengine.com ([66.111.4.28]:49533 "EHLO out4-smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1431350AbdDYSkq (ORCPT ); Tue, 25 Apr 2017 14:40:46 -0400 From: Mark Greer To: Samuel Ortiz Cc: linux-wireless@vger.kernel.org, linux-nfc@lists.01.org, devicetree@vger.kernel.org, Mark Greer Subject: [PATCH v4 7/9] NFC: trf7970a: Enable pins are active high not active low Date: Tue, 25 Apr 2017 11:40:34 -0700 Message-Id: <20170425184036.1212-8-mgreer@animalcreek.com> (sfid-20170425_204109_337293_8F9F17CE) In-Reply-To: <20170425184036.1212-1-mgreer@animalcreek.com> References: <20170425184036.1212-1-mgreer@animalcreek.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: The example DTS code for the trf7970a sets the GPIOs for the EN and EN2 pins to active low when they are really active high so correct the error. Acked-by: Rob Herring Signed-off-by: Mark Greer --- Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 57cb52c94783..a24a93a4b010 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -36,8 +36,8 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): spi-max-frequency = <2000000>; interrupt-parent = <&gpio2>; interrupts = <14 0>; - ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, - <&gpio2 5 GPIO_ACTIVE_LOW>; + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, + <&gpio2 5 GPIO_ACTIVE_HIGH>; vin-supply = <&ldo3_reg>; vdd-io-supply = <&ldo2_reg>; autosuspend-delay = <30000>; -- 2.12.0