Return-path: Received: from mail-sn1nam02on0041.outbound.protection.outlook.com ([104.47.36.41]:47104 "EHLO NAM02-SN1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750740AbdE0TbW (ORCPT ); Sat, 27 May 2017 15:31:22 -0400 Subject: Re: [PATCH] Per chain RSSI reporting To: Michael Ney , "linux-wireless@vger.kernel.org" , "ath10k@lists.infradead.org" CC: Ben Greear , Adrian Chadd References: <21095854-07c7-7586-6a6e-e60c11932b84@candelatech.com> <4A8583B3-FFB2-4BDE-8041-9478CAD9EF73@vorklift.com> From: Norik Dzhandzhapanyan Message-ID: <27cddbb1-4c05-c014-e489-f005d38653d6@ethertronics.com> (sfid-20170527_213126_470757_84D34AC4) Date: Sat, 27 May 2017 12:31:14 -0700 MIME-Version: 1.0 In-Reply-To: <4A8583B3-FFB2-4BDE-8041-9478CAD9EF73@vorklift.com> Content-Type: text/plain; charset="utf-8"; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: Is there an enhanced or conflicting patch pending? On 05/27/2017 10:56 AM, Michael Ney wrote: > The submitted code also doesn't appear to handle RSSI per-peer which woul= d be needed for any use when configured as an access point. > >> On May 27, 2017, at 12:39 PM, Adrian Chadd wrote: >> >> On 27 May 2017 at 09:07, Ben Greear wrote: >>> At low encoding rates, especially if it switches to a single-chain enco= ding, >>> maybe the on-air signal really is stronger? >>> >>> Have you verified in some other manner than the signals reported by ath= 10k >>> are >>> wrong? >> Hiya, >> >> So yeah, multipath, higher TX rates =3D=3D weaker TX signal, TPC, etc ar= e >> all interesting to know about at the receiver. it's hard to separate >> that out from the noise sometimes, but in some controlled deployments >> its really obvious. >> >> >> >> -adrian >> >> _______________________________________________ >> ath10k mailing list >> ath10k@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/ath10k The contents of this transmission are Ethertronics Inc. Confidential and ma= y contain proprietary or legally privileged information which may not be di= sclosed, copied or distributed without the express written consent of Ether= tronics Inc. The information is intended to be for the use of the individua= l or entity named on this transmission. If you are not the intended recipie= nt, be aware that any disclosure, copying, distribution or use of the conte= nts of this information is prohibited. If you have received this transmissi= on in error, please notify us by telephone immediately so that we can arran= ge for the retrieval of the original documents at no cost to you. Alternati= vely, notify the sender by replying to this transmission and delete the mes= sage without disclosing it. Thank you