Return-path: Received: from mail-pf0-f193.google.com ([209.85.192.193]:33648 "EHLO mail-pf0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751145AbdFBOPz (ORCPT ); Fri, 2 Jun 2017 10:15:55 -0400 Received: by mail-pf0-f193.google.com with SMTP id f27so11918746pfe.0 for ; Fri, 02 Jun 2017 07:15:54 -0700 (PDT) From: Amitkumar Karwar To: Kalle Valo Cc: linux-wireless@vger.kernel.org, Alexey.Brodkin@synopsys.com, Amitkumar Karwar , Prameela Rani Garnepudi , Amitkumar Karwar Subject: [PATCH 5/6] rsi: configure new boot parameters to device Date: Fri, 2 Jun 2017 19:43:04 +0530 Message-Id: <1496412785-8720-6-git-send-email-amit.karwar@redpinesignals.com> (sfid-20170602_161558_648201_4DA88428) In-Reply-To: <1496412785-8720-1-git-send-email-amit.karwar@redpinesignals.com> References: <1496412785-8720-1-git-send-email-amit.karwar@redpinesignals.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Prameela Rani Garnepudi Boot parameters are changed in new firmware. Also three new sdio sleep parameters are added for ultra low power save. Signed-off-by: Prameela Rani Garnepudi Signed-off-by: Amitkumar Karwar --- drivers/net/wireless/rsi/rsi_91x_mgmt.c | 20 +++++++++++++------- drivers/net/wireless/rsi/rsi_boot_params.h | 15 +++++++++------ 2 files changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c index fac87c0..b2950aa 100644 --- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c +++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c @@ -45,10 +45,10 @@ static struct bootup_params boot_params_20 = { } }, .switch_clk_g = { - .switch_clk_info = cpu_to_le16(BIT(3)), - .bbp_lmac_clk_reg_val = cpu_to_le16(0x121), - .umac_clock_reg_config = 0x0, - .qspi_uart_clock_reg_config = 0x0 + .switch_clk_info = cpu_to_le16(0xb), + .bbp_lmac_clk_reg_val = cpu_to_le16(0x111), + .umac_clock_reg_config = cpu_to_le16(0x48), + .qspi_uart_clock_reg_config = cpu_to_le16(0x1211) } }, { @@ -106,7 +106,10 @@ static struct bootup_params boot_params_20 = { .wdt_prog_value = 0x0, .wdt_soc_rst_delay = 0x0, .dcdc_operation_mode = 0x0, - .soc_reset_wait_cnt = 0x0 + .soc_reset_wait_cnt = 0x0, + .waiting_time_at_fresh_sleep = 0x0, + .max_threshold_to_avoid_sleep = 0x0, + .beacon_resedue_alg_en = 0, }; static struct bootup_params boot_params_40 = { @@ -139,7 +142,7 @@ static struct bootup_params boot_params_40 = { .switch_clk_info = cpu_to_le16(0x09), .bbp_lmac_clk_reg_val = cpu_to_le16(0x1121), .umac_clock_reg_config = cpu_to_le16(0x48), - .qspi_uart_clock_reg_config = 0x0 + .qspi_uart_clock_reg_config = cpu_to_le16(0x1211) } }, { @@ -197,7 +200,10 @@ static struct bootup_params boot_params_40 = { .wdt_prog_value = 0x0, .wdt_soc_rst_delay = 0x0, .dcdc_operation_mode = 0x0, - .soc_reset_wait_cnt = 0x0 + .soc_reset_wait_cnt = 0x0, + .waiting_time_at_fresh_sleep = 0x0, + .max_threshold_to_avoid_sleep = 0x0, + .beacon_resedue_alg_en = 0, }; static u16 mcs[] = {13, 26, 39, 52, 78, 104, 117, 130}; diff --git a/drivers/net/wireless/rsi/rsi_boot_params.h b/drivers/net/wireless/rsi/rsi_boot_params.h index 5e2721f..238ee96 100644 --- a/drivers/net/wireless/rsi/rsi_boot_params.h +++ b/drivers/net/wireless/rsi/rsi_boot_params.h @@ -24,19 +24,19 @@ #define WIFI_AFEPLL_CONFIGS BIT(7) #define WIFI_SWITCH_CLK_CONFIGS BIT(8) -#define TA_PLL_M_VAL_20 8 -#define TA_PLL_N_VAL_20 1 +#define TA_PLL_M_VAL_20 9 +#define TA_PLL_N_VAL_20 0 #define TA_PLL_P_VAL_20 4 #define PLL960_M_VAL_20 0x14 #define PLL960_N_VAL_20 0 #define PLL960_P_VAL_20 5 -#define UMAC_CLK_40MHZ 40 +#define UMAC_CLK_40MHZ 80 -#define TA_PLL_M_VAL_40 46 -#define TA_PLL_N_VAL_40 3 -#define TA_PLL_P_VAL_40 3 +#define TA_PLL_M_VAL_40 9 +#define TA_PLL_N_VAL_40 0 +#define TA_PLL_P_VAL_40 4 #define PLL960_M_VAL_40 0x14 #define PLL960_N_VAL_40 0 @@ -122,5 +122,8 @@ struct bootup_params { /* dcdc modes configs */ __le32 dcdc_operation_mode; __le32 soc_reset_wait_cnt; + __le32 waiting_time_at_fresh_sleep; + __le32 max_threshold_to_avoid_sleep; + u8 beacon_resedue_alg_en; } __packed; #endif -- 2.7.4