Return-path: Received: from mx1.redhat.com ([209.132.183.28]:45200 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753783AbdGLQr3 (ORCPT ); Wed, 12 Jul 2017 12:47:29 -0400 Message-ID: <1499878022.6577.4.camel@redhat.com> (sfid-20170712_184732_897222_9174C09B) Subject: [PATCH] ipw2100: don't return positive values to PCI probe on error From: Dan Williams To: linux-wireless@vger.kernel.org Cc: Stanislav Yakovlev Date: Wed, 12 Jul 2017 11:47:02 -0500 Content-Type: text/plain; charset="UTF-8" Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Causes the PCI stack to complain, and then eventually call the PCI remove function, which ipw2100 is not expecting. It then tries to unregister an already-released netdev and other nasty things, leading to a panic. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1185518 Signed-off-by: Dan Williams --- drivers/net/wireless/intel/ipw2x00/ipw2100.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c index f922859..7819959 100644 --- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c @@ -1724,7 +1724,7 @@ static const struct libipw_geo ipw_geos[] = { static int ipw2100_up(struct ipw2100_priv *priv, int deferred) { unsigned long flags; - int rc = 0; + int err = 0; u32 lock; u32 ord_len = sizeof(lock); @@ -1757,33 +1757,33 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred) if (priv->status & STATUS_POWERED || (priv->status & STATUS_RESET_PENDING)) { /* Power cycle the card ... */ - if (ipw2100_power_cycle_adapter(priv)) { + err = ipw2100_power_cycle_adapter(priv); + if (err) { printk(KERN_WARNING DRV_NAME ": %s: Could not cycle adapter.\n", priv->net_dev->name); - rc = 1; goto exit; } } else priv->status |= STATUS_POWERED; /* Load the firmware, start the clocks, etc. */ - if (ipw2100_start_adapter(priv)) { + err = ipw2100_start_adapter(priv); + if (err) { printk(KERN_ERR DRV_NAME ": %s: Failed to start the firmware.\n", priv->net_dev->name); - rc = 1; goto exit; } ipw2100_initialize_ordinals(priv); /* Determine capabilities of this particular HW configuration */ - if (ipw2100_get_hw_features(priv)) { + err = ipw2100_get_hw_features(priv); + if (err) { printk(KERN_ERR DRV_NAME ": %s: Failed to determine HW features.\n", priv->net_dev->name); - rc = 1; goto exit; } @@ -1792,11 +1792,11 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred) priv->ieee->freq_band = LIBIPW_24GHZ_BAND; lock = LOCK_NONE; - if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) { + err = ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len); + if (err) { printk(KERN_ERR DRV_NAME ": %s: Failed to clear ordinal lock.\n", priv->net_dev->name); - rc = 1; goto exit; } @@ -1820,21 +1820,21 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred) /* Send all of the commands that must be sent prior to * HOST_COMPLETE */ - if (ipw2100_adapter_setup(priv)) { + err = ipw2100_adapter_setup(priv); + if (err) { printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n", priv->net_dev->name); - rc = 1; goto exit; } if (!deferred) { /* Enable the adapter - sends HOST_COMPLETE */ - if (ipw2100_enable_adapter(priv)) { + err = ipw2100_enable_adapter(priv); + if (err) { printk(KERN_ERR DRV_NAME ": " "%s: failed in call to enable adapter.\n", priv->net_dev->name); ipw2100_hw_stop_adapter(priv); - rc = 1; goto exit; } @@ -1844,7 +1844,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred) } exit: - return rc; + return err; } static void ipw2100_down(struct ipw2100_priv *priv) -- 2.9.4