Return-path: Received: from alexa-out.qualcomm.com ([129.46.98.28]:37196 "EHLO alexa-out-lv-01.qualcomm.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752555AbdGaQcl (ORCPT ); Mon, 31 Jul 2017 12:32:41 -0400 Cc: Hamad Kadmany , linux-wireless@vger.kernel.org, wil6210@qca.qualcomm.com, Maya Erez From: Maya Erez To: Kalle Valo Subject: [PATCH 02/10] wil6210: allow configuring scan timers Date: Mon, 31 Jul 2017 19:32:25 +0300 Message-Id: <1501518753-6339-3-git-send-email-qca_merez@qca.qualcomm.com> (sfid-20170731_183245_889026_EC211B84) In-Reply-To: <1501518753-6339-1-git-send-email-qca_merez@qca.qualcomm.com> References: <1501518753-6339-1-git-send-email-qca_merez@qca.qualcomm.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Hamad Kadmany Allow setting scan timeout and scan dwell time through module parameters. Signed-off-by: Hamad Kadmany Signed-off-by: Maya Erez --- drivers/net/wireless/ath/wil6210/cfg80211.c | 17 ++++++++++++++--- drivers/net/wireless/ath/wil6210/wil6210.h | 2 +- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 77af749..d079533 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -26,6 +26,14 @@ module_param(disable_ap_sme, bool, 0444); MODULE_PARM_DESC(disable_ap_sme, " let user space handle AP mode SME"); +static uint scan_dwell_time = WMI_SCAN_DWELL_TIME_MS; +module_param(scan_dwell_time, uint, 0644); +MODULE_PARM_DESC(scan_dwell_time, " Scan dwell time (msec)"); + +static uint scan_timeout = WIL6210_SCAN_TO_SEC; +module_param(scan_timeout, uint, 0644); +MODULE_PARM_DESC(scan_timeout, " Scan timeout (seconds)"); + #define CHAN60G(_channel, _flags) { \ .band = NL80211_BAND_60GHZ, \ .center_freq = 56160 + (2160 * (_channel)), \ @@ -528,8 +536,9 @@ static int wil_cfg80211_scan(struct wiphy *wiphy, (void)wil_p2p_stop_discovery(wil); - wil_dbg_misc(wil, "Start scan_request 0x%p\n", request); - wil_dbg_misc(wil, "SSID count: %d", request->n_ssids); + wil_dbg_misc(wil, + "Start scan_request 0x%p, dwell_time %dms, timeout %dsec, SSID count %d\n", + request, scan_dwell_time, scan_timeout, request->n_ssids); for (i = 0; i < request->n_ssids; i++) { wil_dbg_misc(wil, "SSID[%d]", i); @@ -550,10 +559,12 @@ static int wil_cfg80211_scan(struct wiphy *wiphy, } wil->scan_request = request; - mod_timer(&wil->scan_timer, jiffies + WIL6210_SCAN_TO); + mod_timer(&wil->scan_timer, + jiffies + msecs_to_jiffies(1000U * scan_timeout)); memset(&cmd, 0, sizeof(cmd)); cmd.cmd.scan_type = WMI_ACTIVE_SCAN; + cmd.cmd.dwell_time = cpu_to_le32(scan_dwell_time); cmd.cmd.num_channels = 0; n = min(request->n_channels, 4U); for (i = 0; i < n; i++) { diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index d085ccf..ac32284 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -112,7 +112,7 @@ static inline u32 wil_mtu2macbuf(u32 mtu) #define WIL6210_ITR_RX_MAX_BURST_DURATION_DEFAULT (500) /* usec */ #define WIL6210_FW_RECOVERY_RETRIES (5) /* try to recover this many times */ #define WIL6210_FW_RECOVERY_TO msecs_to_jiffies(5000) -#define WIL6210_SCAN_TO msecs_to_jiffies(10000) +#define WIL6210_SCAN_TO_SEC 10 #define WIL6210_DISCONNECT_TO_MS (2000) #define WIL6210_RX_HIGH_TRSH_INIT (0) #define WIL6210_RX_HIGH_TRSH_DEFAULT \ -- 1.9.1