Return-path: Received: from mail-pf0-f193.google.com ([209.85.192.193]:38807 "EHLO mail-pf0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751202AbdI3Ri3 (ORCPT ); Sat, 30 Sep 2017 13:38:29 -0400 Received: by mail-pf0-f193.google.com with SMTP id a7so1758460pfj.5 for ; Sat, 30 Sep 2017 10:38:28 -0700 (PDT) From: silexcommon@gmail.com To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Alagu Sankar Subject: [PATCH 01/11] ath10k_sdio: sdio htt data transfer fixes Date: Sat, 30 Sep 2017 23:07:38 +0530 Message-Id: <1506793068-27445-2-git-send-email-alagusankar@silex-india.com> (sfid-20170930_193754_250537_7239156C) In-Reply-To: <1506793068-27445-1-git-send-email-alagusankar@silex-india.com> References: <1506793068-27445-1-git-send-email-alagusankar@silex-india.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Alagu Sankar The ath10k sdio firmware does not allow transmitting packets with the reduced tx completion HI_ACS option. sdio firmware uses 1544 as alternate credit size, which is not big enough for the maximum sized mac80211 frames. Disable both these HI_ACS flags for SDIO. Transmit completion for SDIO is similar to PCIe, via the T2H message HTT_T2H_MSG_TYPE_TX_COMPL_IND. Modify the high latency path to allow SDIO modules to use the htt transmit completion path. This differs from the high latency path taken by the USB devices. Signed-off-by: Alagu Sankar --- drivers/net/wireless/ath/ath10k/core.c | 20 +++++++++++++++++--- drivers/net/wireless/ath/ath10k/htt_rx.c | 6 ++++-- drivers/net/wireless/ath/ath10k/htt_tx.c | 24 +++++++++++++++++++----- 3 files changed, 40 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 4351341..b4f66cd 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -494,11 +494,25 @@ static void ath10k_init_sdio(struct ath10k *ar) ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99); ath10k_bmi_read32(ar, hi_acs_flags, ¶m); - param |= (HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET | - HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET | - HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE); + /* Data transfer is not initiated, when reduced Tx completion + * is used for SDIO. disable it until fixed + */ + param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET; + + /* Alternate credit size of 1544 as used by SDIO firmware is + * not big enough for mac80211 / native wifi frames. disable it + */ + param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE; + param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; ath10k_bmi_write32(ar, hi_acs_flags, param); + + /* Explicitly set fwlog prints to zero as target may turn it on + * based on scratch registers. + */ + ath10k_bmi_read32(ar, hi_option_flag, ¶m); + param |= HI_OPTION_DISABLE_DBGLOG; + ath10k_bmi_write32(ar, hi_option_flag, param); } static int ath10k_init_configure_target(struct ath10k *ar) diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 569edd0..f025363 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1764,7 +1764,9 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar, * Note that with only one concurrent reader and one concurrent * writer, you don't need extra locking to use these macro. */ - if (!kfifo_put(&htt->txdone_fifo, tx_done)) { + if (ar->hif.bus == ATH10K_BUS_SDIO) { + ath10k_txrx_tx_unref(htt, &tx_done); + } else if (!kfifo_put(&htt->txdone_fifo, tx_done)) { ath10k_warn(ar, "txdone fifo overrun, msdu_id %d status %d\n", tx_done.msdu_id, tx_done.status); ath10k_txrx_tx_unref(htt, &tx_done); @@ -2541,7 +2543,7 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) break; } case HTT_T2H_MSG_TYPE_TX_COMPL_IND: - if (!ar->is_high_latency) + if (!(ar->hif.bus == ATH10K_BUS_USB)) ath10k_htt_rx_tx_compl_ind(htt->ar, skb); break; case HTT_T2H_MSG_TYPE_SEC_IND: { diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index c74fc13..d7f59a2 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -153,7 +153,7 @@ void ath10k_htt_tx_txq_update(struct ieee80211_hw *hw, void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt) { - if (htt->ar->is_high_latency) + if (htt->ar->hif.bus == ATH10K_BUS_USB) return; lockdep_assert_held(&htt->tx_lock); @@ -165,7 +165,7 @@ void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt) int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt) { - if (htt->ar->is_high_latency) + if (htt->ar->hif.bus == ATH10K_BUS_USB) return 0; lockdep_assert_held(&htt->tx_lock); @@ -454,7 +454,7 @@ void ath10k_htt_tx_destroy(struct ath10k_htt *htt) return; ath10k_htt_tx_free_cont_txbuf(htt); - if (!htt->ar->is_high_latency) + if (!(htt->ar->hif.bus == ATH10K_BUS_USB)) ath10k_htt_tx_free_txq(htt); ath10k_htt_tx_free_cont_frag_desc(htt); ath10k_htt_tx_free_txdone_fifo(htt); @@ -475,7 +475,8 @@ void ath10k_htt_tx_free(struct ath10k_htt *htt) void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb) { - dev_kfree_skb_any(skb); + if (!(ar->hif.bus == ATH10K_BUS_SDIO)) + dev_kfree_skb_any(skb); } void ath10k_htt_hif_tx_complete(struct ath10k *ar, struct sk_buff *skb) @@ -975,6 +976,7 @@ int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txmode, u8 tid = ath10k_htt_tx_get_tid(msdu, is_eth); u8 flags0 = 0; u16 flags1 = 0; + u16 msdu_id = 0; data_len = msdu->len; @@ -1022,6 +1024,18 @@ int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txmode, } } + if (ar->hif.bus == ATH10K_BUS_SDIO) { + flags1 |= HTT_DATA_TX_DESC_FLAGS1_POSTPONED; + spin_lock_bh(&htt->tx_lock); + res = ath10k_htt_tx_alloc_msdu_id(htt, msdu); + spin_unlock_bh(&htt->tx_lock); + if (res < 0) { + ath10k_err(ar, "msdu_id allocation failed %d\n", res); + goto out; + } + msdu_id = res; + } + skb_push(msdu, sizeof(*cmd_hdr)); skb_push(msdu, sizeof(*tx_desc)); cmd_hdr = (struct htt_cmd_hdr *)msdu->data; @@ -1031,7 +1045,7 @@ int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txmode, tx_desc->flags0 = flags0; tx_desc->flags1 = __cpu_to_le16(flags1); tx_desc->len = __cpu_to_le16(data_len); - tx_desc->id = 0; + tx_desc->id = __cpu_to_le16(msdu_id); tx_desc->frags_paddr = 0; /* always zero */ /* Initialize peer_id to INVALID_PEER because this is NOT * Reinjection path -- 1.9.1