Return-path: Received: from mail-wm0-f65.google.com ([74.125.82.65]:53661 "EHLO mail-wm0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932329AbdJ0VDU (ORCPT ); Fri, 27 Oct 2017 17:03:20 -0400 Received: by mail-wm0-f65.google.com with SMTP id r196so5985982wmf.2 for ; Fri, 27 Oct 2017 14:03:19 -0700 (PDT) Subject: Re: rtlwifi oops To: James Cameron Cc: Larry Finger , linux-wireless@vger.kernel.org References: <20171018223320.GB641@us.netrek.org> <20171027045716.GH9888@us.netrek.org> From: nirinA raseliarison Message-ID: <7532bb89-9f58-f2e2-e9c3-baa4be24da81@gmail.com> (sfid-20171027_230327_877169_1937551A) Date: Sat, 28 Oct 2017 00:02:30 +0300 MIME-Version: 1.0 In-Reply-To: <20171027045716.GH9888@us.netrek.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 10/27/2017 07:57 AM, James Cameron wrote: > On Fri, Oct 27, 2017 at 04:08:48AM +0300, nirinA raseliarison wrote: >> hi all, >> i applied the patch against 4.13.8. i still got some trouble, dmesg >> is below. > > As this new event does not have "disabled by hub (EMI?)", it is a > different problem to your 19th October post, so I don't think the > patch is relevant. > >> after i plugged the device, it seems to be detected and all modules >> loaded, but when i tried to connect to an access point, by using >> wicd, it halted after a while. at this point, all usb ports are >> broken, there was no more log in dmesg, > > If the other USB ports are not responding, then your problem is > probably wider than the wireless device, and the wireless device > is acting as the "canary in the mine"; failing first because it is > the most active. > > Can you test to exclude possibility of damaged USB host controller or > hub? yes, dmesg below with an usb audio adapter and a usb mouse plugged at boot time. then the rtl8192cu plugged, and i'm using it to retrieve and send this mail. my first guess was also about a damaged device or usb port as those random crashes are recent. note that the device i'm using here is not the same as the one that triggered the previous errors. >> lsusb still showed the device even after being unplugged. it got >> even worse as reboot failed. > > Yes, once a USB host controller is failed, organised reboot can be > difficult. lsusb not updated confirms host controller not responding. > >> i cannot really trace the error as right now all thing works fine. > > Your dmesg looks like you removed and reinserted the wireless device > several times. Did you do that, or did the system do it without any > physical action? no, the device was always connected. i've only removed it long after i noticed something went wrong and just before i tried reboot. > A full dmesg from boot may be interesting, at least to better > understand the USB host controller. > here it is. thanks, ## [ 0.000000] random: get_random_bytes called from start_kernel+0x2a/0x413 with crng_init=0 [ 0.000000] Linux version 4.13.8.20171019 (root@supernova) (gcc version 7.2.0 (GCC)) #1 SMP Thu Oct 19 03:53:05 EAT 2017 [ 0.000000] Command line: BOOT_IMAGE=nirinA ro root=802 vt.default_utf8=0 console=tty0 raid=noautodetect [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cdf30fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cdf31000-0x00000000ce25afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ce25b000-0x00000000ce25bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ce25c000-0x00000000ce373fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ce374000-0x00000000ce6d8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ce6d9000-0x00000000ce6d9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ce6da000-0x00000000ce71cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ce71d000-0x00000000cee19fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cee1a000-0x00000000ceff1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ceff2000-0x00000000ceffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./ONDA H61V Ver:4.01, BIOS 4.6.5 01/07/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 5 base 21F800000 mask FFF800000 uncachable [ 0.000000] 6 base 21F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] BRK [0x02145000, 0x02145fff] PGTABLE [ 0.000000] BRK [0x02146000, 0x02146fff] PGTABLE [ 0.000000] BRK [0x02147000, 0x02147fff] PGTABLE [ 0.000000] BRK [0x02148000, 0x02148fff] PGTABLE [ 0.000000] BRK [0x02149000, 0x02149fff] PGTABLE [ 0.000000] BRK [0x0214a000, 0x0214afff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000CE362070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000CE36B698 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000CE362170 009526 (v02 ALASKA A M I 00000660 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000CE372F80 000040 [ 0.000000] ACPI: APIC 0x00000000CE36B790 000062 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000CE36B7F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000CE36B840 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000CE36B880 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000CE36B8B8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000CE36BC28 000860 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000CE36C488 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000cdf30fff] [ 0.000000] node 0: [mem 0x00000000ce6d9000-0x00000000ce6d9fff] [ 0.000000] node 0: [mem 0x00000000ce71d000-0x00000000cee19fff] [ 0.000000] node 0: [mem 0x00000000ceff2000-0x00000000ceffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff] [ 0.000000] On node 0 totalpages: 2021848 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13137 pages used for memmap [ 0.000000] DMA32 zone: 840764 pages, LIFO batch:31 [ 0.000000] Normal zone: 18392 pages used for memmap [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000cfa00000-0x00000000df9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcdf31000-0xce25afff] [ 0.000000] PM: Registered nosave memory: [mem 0xce25b000-0xce25bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xce25c000-0xce373fff] [ 0.000000] PM: Registered nosave memory: [mem 0xce374000-0xce6d8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xce6da000-0xce71cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcee1a000-0xceff1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xcf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 37 pages/cpu @ffff88021f200000 s111192 r8192 d32168 u1048576 [ 0.000000] pcpu-alloc: s111192 r8192 d32168 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1990234 [ 0.000000] Kernel command line: BOOT_IMAGE=nirinA ro root=802 vt.default_utf8=0 console=tty0 raid=noautodetect [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7863988K/8087392K available (9617K kernel code, 1116K rwdata, 3012K rodata, 1440K init, 660K bss, 223404K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 36813 entries in 144 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2594.066 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.13 BogoMIPS (lpj=2594066) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170531 [ 0.005766] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.005787] Security Framework initialized [ 0.005817] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.005843] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.005982] CPU: Physical Processor ID: 0 [ 0.005986] CPU: Processor Core ID: 0 [ 0.005991] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.006003] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.006009] mce: CPU supports 7 MCE banks [ 0.006018] CPU0: Thermal monitoring enabled (TM1) [ 0.006028] process: using mwait in idle threads [ 0.006032] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.006035] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.006111] Freeing SMP alternatives memory: 36K [ 0.007054] smpboot: Max logical packages: 1 [ 0.007467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.017646] TSC deadline timer enabled [ 0.017648] smpboot: CPU0: Intel(R) Celeron(R) CPU G1610 @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.017701] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.017726] ... version: 3 [ 0.017728] ... bit width: 48 [ 0.017731] ... generic registers: 8 [ 0.017734] ... value mask: 0000ffffffffffff [ 0.017737] ... max period: 00007fffffffffff [ 0.017740] ... fixed-purpose events: 3 [ 0.017743] ... event mask: 00000007000000ff [ 0.017772] Hierarchical SRCU implementation. [ 0.017840] smp: Bringing up secondary CPUs ... [ 0.017888] x86: Booting SMP configuration: [ 0.017892] .... node #0, CPUs: #1 [ 0.078018] smp: Brought up 1 node, 2 CPUs [ 0.078018] smpboot: Total of 2 processors activated (10379.97 BogoMIPS) [ 0.079123] devtmpfs: initialized [ 0.079123] x86/mm: Memory block size: 128MB [ 0.079489] PM: Registering ACPI NVS region [mem 0xce25c000-0xce373fff] (1146880 bytes) [ 0.079489] PM: Registering ACPI NVS region [mem 0xce6da000-0xce71cfff] (274432 bytes) [ 0.079489] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.079489] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.079489] pinctrl core: initialized pinctrl subsystem [ 0.079489] NET: Registered protocol family 16 [ 0.080026] cpuidle: using governor ladder [ 0.080026] cpuidle: using governor menu [ 0.080026] PCCT header not found. [ 0.080048] ACPI: bus type PCI registered [ 0.080052] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.080082] PCI: Using configuration type 1 for base access [ 0.080122] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.083368] ACPI: Added _OSI(Module Device) [ 0.083368] ACPI: Added _OSI(Processor Device) [ 0.083368] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.083368] ACPI: Added _OSI(Processor Aggregator Device) [ 0.083368] ACPI: Executed 1 blocks of module-level executable AML code [ 0.086305] ACPI: Dynamic OEM Table Load: [ 0.086314] ACPI: SSDT 0xFFFF880216669000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.086395] ACPI: Dynamic OEM Table Load: [ 0.086395] ACPI: SSDT 0xFFFF88021642DC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.087030] ACPI: Dynamic OEM Table Load: [ 0.087035] ACPI: SSDT 0xFFFF880216708200 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.087379] ACPI: Interpreter enabled [ 0.087401] ACPI: (supports S0 S1 S3 S4 S5) [ 0.087404] ACPI: Using IOAPIC for interrupt routing [ 0.087428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.092821] ACPI: Power Resource [FN00] (off) [ 0.092884] ACPI: Power Resource [FN01] (off) [ 0.092945] ACPI: Power Resource [FN02] (off) [ 0.093005] ACPI: Power Resource [FN03] (off) [ 0.093066] ACPI: Power Resource [FN04] (off) [ 0.093467] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.093474] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.093596] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.093955] PCI host bridge to bus 0000:00 [ 0.093960] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.093963] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.093967] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.093972] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.093978] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.093983] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.093988] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.093993] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.093998] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.094002] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.094012] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.094090] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.094100] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.094105] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.094109] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.094202] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.094227] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit] [ 0.094298] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.094370] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.094391] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c08000-0xf7c083ff] [ 0.094474] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.094540] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.094558] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.094623] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.094688] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.094764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.094834] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.094909] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.094983] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.095004] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff] [ 0.095086] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.095153] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100 [ 0.095317] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.095335] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.095342] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.095350] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.095357] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.095364] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.095371] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c06000-0xf7c067ff] [ 0.095411] pci 0000:00:1f.2: PME# supported from D3hot [ 0.095471] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.095489] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit] [ 0.095509] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.095626] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.095700] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000 [ 0.095725] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.095758] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.095778] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.095870] pci 0000:02:00.0: supports D1 D2 [ 0.095871] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.098023] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.098032] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.098042] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.098071] pci_bus 0000:00: on NUMA node 0 [ 0.098356] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.098402] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.098448] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.098490] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.098533] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.098578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.098623] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.098666] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.098825] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.098882] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.098882] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.098882] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.098882] vgaarb: loaded [ 0.098882] SCSI subsystem initialized [ 0.099002] libata version 3.00 loaded. [ 0.099005] ACPI: bus type USB registered [ 0.099023] usbcore: registered new interface driver usbfs [ 0.099033] usbcore: registered new interface driver hub [ 0.099043] usbcore: registered new device driver usb [ 0.099057] EDAC MC: Ver: 3.0.0 [ 0.099114] PCI: Using ACPI for IRQ routing [ 0.099114] PCI: pci_cache_line_size set to 64 bytes [ 0.099114] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.099114] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.099114] e820: reserve RAM buffer [mem 0xcdf31000-0xcfffffff] [ 0.099114] e820: reserve RAM buffer [mem 0xce6da000-0xcfffffff] [ 0.099114] e820: reserve RAM buffer [mem 0xcee1a000-0xcfffffff] [ 0.099114] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff] [ 0.099114] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff] [ 0.099133] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.099133] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.101009] clocksource: Switched to clocksource hpet [ 0.106961] VFS: Disk quotas dquot_6.6.0 [ 0.106981] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.107043] pnp: PnP ACPI init [ 0.107133] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.107139] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.107197] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.107201] system 00:01: [io 0x0200-0x020f] has been reserved [ 0.107205] system 00:01: [io 0xffff] has been reserved [ 0.107209] system 00:01: [io 0xffff] has been reserved [ 0.107212] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.107216] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.107219] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.107223] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.107227] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107245] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.107278] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.107282] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.107342] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.107346] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107376] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.107487] pnp 00:06: [dma 0 disabled] [ 0.107520] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.107553] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.107558] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107712] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.107716] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.107720] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.107724] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.107727] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.107731] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.107735] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.107739] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.107742] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.107746] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.107750] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.107754] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107866] system 00:09: [mem 0x20000000-0x201fffff] has been reserved [ 0.107870] system 00:09: [mem 0x40004000-0x40004fff] has been reserved [ 0.107874] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.107891] pnp: PnP ACPI: found 10 devices [ 0.113798] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.113825] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.113839] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.113845] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.113854] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.113865] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.113866] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.113867] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.113868] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.113869] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.113870] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.113871] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window] [ 0.113872] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window] [ 0.113873] pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff window] [ 0.113874] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.113875] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.113947] NET: Registered protocol family 2 [ 0.114057] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.114158] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.114341] TCP: Hash tables configured (established 65536 bind 65536) [ 0.114371] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.114399] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.114458] NET: Registered protocol family 1 [ 0.114555] RPC: Registered named UNIX socket transport module. [ 0.114559] RPC: Registered udp transport module. [ 0.114562] RPC: Registered tcp transport module. [ 0.114564] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.114579] pmd_set_huge: Cannot satisfy [mem 0xf7800000-0xf7a00000] with a huge-page mapping due to MTRR override. [ 0.114592] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.114611] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.147118] PCI: CLS 64 bytes, default 64 [ 0.147154] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.147158] software IO TLB [mem 0xc9f31000-0xcdf31000] (64MB) mapped at [ffff8800c9f31000-ffff8800cdf30fff] [ 0.147223] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 0.147228] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 0.147231] RAPL PMU: hw unit of domain package 2^-16 Joules [ 0.147234] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 0.147496] audit: initializing netlink subsys (disabled) [ 0.147530] audit: type=2000 audit(1509135453.147:1): state=initialized audit_enabled=0 res=1 [ 0.147671] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.148709] NFS: Registering the id_resolver key type [ 0.148718] Key type id_resolver registered [ 0.148721] Key type id_legacy registered [ 0.148725] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.148801] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.148830] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.150274] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.150303] io scheduler noop registered [ 0.150306] io scheduler deadline registered [ 0.150327] io scheduler cfq registered (default) [ 0.150330] io scheduler mq-deadline registered [ 0.150333] io scheduler kyber registered [ 0.150618] vesafb: mode is 1024x768x16, linelength=2048, pages=169 [ 0.150622] vesafb: scrolling: redraw [ 0.150625] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.150638] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000c00000, using 3072k, total 262080k [ 0.175394] Console: switching to colour frame buffer device 128x48 [ 0.198189] fb0: VESA VGA frame buffer device [ 0.198401] intel_idle: MWAIT substates: 0x1120 [ 0.198402] intel_idle: v0.4.1 model 0x3A [ 0.198455] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.198512] GHES: HEST is not enabled! [ 0.201091] brd: module loaded [ 0.201390] fnic: Cisco FCoE HBA Driver, ver 1.6.0.34 [ 0.201638] fnic: Successfully Initialized Trace Buffer [ 0.201906] fnic: Successfully Initialized FC_CTLR Trace Buffer [ 0.202354] Adaptec aacraid driver 1.2.1[50834]-custom [ 0.202601] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.203042] scsi: Detection failed (no card) [ 0.203293] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.00-k. [ 0.203682] Emulex LightPulse Fibre Channel SCSI driver 11.4.0.1 [ 0.203960] Copyright (C) 2017 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. [ 0.204583] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.1 [ 0.204927] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 0.205288] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 0.205618] megasas: 07.701.17.00-rc1 [ 0.205797] mpt3sas version 15.100.00.00 loaded [ 0.215058] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.224498] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 0.233996] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 0.243526] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 0.253071] ipr: IBM Power RAID SCSI Device Driver version: 2.6.4 (March 14, 2017) [ 0.262627] RocketRAID 3xxx/4xxx Controller driver v1.10.0 [ 0.272099] stex: Promise SuperTrak EX Driver version: 6.02.0000.01 [ 0.281704] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 0.291470] ahci 0000:00:1f.2: version 3.0 [ 0.291637] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 0.301535] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.314344] scsi host0: ahci [ 0.324214] scsi host1: ahci [ 0.333812] scsi host2: ahci [ 0.343146] scsi host3: ahci [ 0.352316] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 24 [ 0.361837] ata2: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06180 irq 24 [ 0.371288] ata3: DUMMY [ 0.380649] ata4: DUMMY [ 0.390440] scsi host4: pata_legacy [ 0.399689] ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 [ 0.708585] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.718014] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.727274] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.736604] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170531/psparse-550) [ 0.746153] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.755718] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170531/psparse-550) [ 0.765606] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100 [ 0.775609] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133 [ 0.785624] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.797067] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.807493] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170531/psparse-550) [ 0.818177] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.828867] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170531/psparse-550) [ 0.839762] ata2.00: configured for UDMA/100 [ 0.850477] ata1.00: configured for UDMA/133 [ 1.183036] tsc: Refined TSC clocksource calibration: 2594.107 MHz [ 1.193411] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns [ 2.207229] clocksource: Switched to clocksource tsc [ 3.231153] floppy0: no floppy controllers found [ 3.241619] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5 [ 3.252177] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.262613] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.273018] sd 0:0:0:0: [sda] Write Protect is off [ 3.273021] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224BB SB00 PQ: 0 ANSI: 5 [ 3.293731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.293742] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.319639] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.330204] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.340791] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.343079] sda: sda1 sda2 sda3 sda5 sda6 [ 3.353800] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.364320] scsi host4: pata_legacy [ 3.374453] ata6: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 [ 3.543439] Fusion MPT base driver 3.04.20 [ 3.553407] Copyright (c) 1999-2008 LSI Corporation [ 3.563330] Fusion MPT SPI Host driver 3.04.20 [ 3.573403] Fusion MPT FC Host driver 3.04.20 [ 3.583554] Fusion MPT SAS Host driver 3.04.20 [ 3.593795] Fusion MPT misc device (ioctl) driver 3.04.20 [ 3.604011] mptctl: Registered with Fusion MPT base driver [ 3.614354] mptctl: /dev/mptctl @ (major,minor=10,220) [ 3.624610] Fusion MPT LAN driver 3.04.20 [ 3.635049] usbcore: registered new interface driver usbserial [ 3.645608] usbcore: registered new interface driver usbserial_generic [ 3.656060] usbserial: USB Serial support registered for generic [ 3.666540] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.677252] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.688678] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.699471] mousedev: PS/2 mouse device common for all mice [ 3.710012] rtc_cmos 00:02: RTC can wake from S4 [ 3.720448] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 3.730561] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.740760] intel_pstate: Intel P-state driver initializing [ 3.751077] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.766645] Initializing XFRM netlink socket [ 3.776445] NET: Registered protocol family 17 [ 3.786018] Key type dns_resolver registered [ 3.795546] microcode: sig=0x306a9, pf=0x2, revision=0x10 [ 3.804839] microcode: Microcode Update Driver: v2.2. [ 3.804849] sched_clock: Marking stable (3804833789, 0)->(3805320172, -486383) [ 3.823571] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.823649] registered taskstats version 1 [ 3.865260] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 3.917720] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.932431] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 3.954965] devtmpfs: mounted [ 3.965977] Freeing unused kernel memory: 1440K [ 3.977257] Write protecting the kernel read-only data: 14336k [ 3.986825] Freeing unused kernel memory: 616K [ 3.998082] Freeing unused kernel memory: 1084K [ 4.006960] rodata_test: all tests were successful [ 4.673130] random: crng init done [ 5.435976] udevd[153]: bind failed: Read-only file system [ 5.449739] udevd[153]: error binding udev control socket [ 5.593569] Adding 16787920k swap on /dev/sda3. Priority:-1 extents:1 across:16787920k [ 5.936881] fuse init (API version 7.26) [ 7.231377] EXT4-fs (sda2): re-mounted. Opts: (null) [ 7.270874] EXT4-fs (sda2): re-mounted. Opts: (null) [ 10.841139] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 10.987833] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 11.116467] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.455793] udevd[528]: starting eudev-3.2.4 [ 17.002954] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 17.002973] ACPI: Power Button [PWRB] [ 17.003147] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 17.003158] ACPI: Power Button [PWRF] [ 17.233207] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247) [ 17.233212] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.233214] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247) [ 17.233217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.233217] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247) [ 17.233220] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.233220] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247) [ 17.233222] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.233223] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 17.282124] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 17.288596] ehci-pci: EHCI PCI platform driver [ 17.288760] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 17.288813] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 17.288827] ehci-pci 0000:00:1a.0: debug port 2 [ 17.292722] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 17.292738] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c08000 [ 17.293717] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 17.314322] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 17.314343] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 17.314391] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 17.314392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.314393] usb usb1: Product: EHCI Host Controller [ 17.314394] usb usb1: Manufacturer: Linux 4.13.8.20171019 ehci_hcd [ 17.314395] usb usb1: SerialNumber: 0000:00:1a.0 [ 17.314493] hub 1-0:1.0: USB hub found [ 17.314498] hub 1-0:1.0: 2 ports detected [ 17.314705] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 17.314742] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 17.314753] ehci-pci 0000:00:1d.0: debug port 2 [ 17.318659] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 17.318671] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c07000 [ 17.325011] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 17.325038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 17.325039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.325041] usb usb2: Product: EHCI Host Controller [ 17.325042] usb usb2: Manufacturer: Linux 4.13.8.20171019 ehci_hcd [ 17.325042] usb usb2: SerialNumber: 0000:00:1d.0 [ 17.325136] hub 2-0:1.0: USB hub found [ 17.325140] hub 2-0:1.0: 2 ports detected [ 17.340999] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 17.355509] Linux agpgart interface v0.103 [ 17.423770] thermal LNXTHERM:00: registered as thermal_zone0 [ 17.423772] ACPI: Thermal Zone [TZ00] (28 C) [ 17.424000] thermal LNXTHERM:01: registered as thermal_zone1 [ 17.424014] ACPI: Thermal Zone [TZ01] (30 C) [ 17.580716] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 17.623013] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 17.640030] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 17.741402] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 17.741404] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 17.741545] hub 1-1:1.0: USB hub found [ 17.741646] hub 1-1:1.0: 4 ports detected [ 17.760429] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 17.760432] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 17.760682] hub 2-1:1.0: USB hub found [ 17.760773] hub 2-1:1.0: 6 ports detected [ 17.805182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 17.805541] r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc90000031000, 00:e0:66:84:16:a7, XID 00a00000 IRQ 26 [ 18.015031] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 18.031011] usb 2-1.3: new low-speed USB device number 3 using ehci-pci [ 18.116428] usb 2-1.3: New USB device found, idVendor=1c4f, idProduct=0034 [ 18.116431] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 18.116432] usb 2-1.3: Product: Usb Mouse [ 18.116434] usb 2-1.3: Manufacturer: SIGMACHIP [ 18.141508] i2c /dev entries driver [ 18.594623] [drm] Memory usable by graphics device = 2048M [ 18.594626] checking generic (e0000000 fff0000) vs hw (e0000000 10000000) [ 18.594627] fb: switching to inteldrmfb from VESA VGA [ 18.594651] Console: switching to colour dummy device 80x25 [ 18.594736] [drm] Replacing VGA console driver [ 18.601079] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 18.601080] [drm] Driver supports precise vblank timestamp query. [ 18.604169] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 18.608058] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 18.608403] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.608591] acpi device:49: registered as cooling_device7 [ 18.608642] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 18.625111] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 18.655772] usb 1-1.2: New USB device found, idVendor=1b3f, idProduct=2007 [ 18.655775] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 18.655776] usb 1-1.2: Product: USB Audio Device [ 18.655778] usb 1-1.2: Manufacturer: GeneralPlus [ 18.671440] fbcon: inteldrmfb (fb0) is primary device [ 18.733098] Console: switching to colour frame buffer device 170x48 [ 18.751719] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 19.250076] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 19.250078] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 19.250080] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 19.250081] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 19.250082] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x1e/0x0 [ 19.250083] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 19.250085] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 [ 19.250086] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 [ 19.250087] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 19.617638] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5 [ 19.617690] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6 [ 19.617720] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 [ 19.617752] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 19.617782] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 19.617813] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 19.617843] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 19.617873] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 20.392010] usb 2-1.3: USB disconnect, device number 3 [ 20.657288] hidraw: raw HID events driver (C) Jiri Kosina [ 20.703225] usbcore: registered new interface driver usbhid [ 20.703226] usbhid: USB HID core driver [ 20.734521] usb 1-1.2: 1:1: cannot get freq at ep 0x5 [ 20.735257] usb 1-1.2: 2:1: cannot get freq at ep 0x86 [ 20.751131] usbcore: registered new interface driver snd-usb-audio [ 20.907898] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.3/0003:1B3F:2007.0001/input/input13 [ 20.959334] hid-generic 0003:1B3F:2007.0001: input,hidraw0: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:1a.0-1.2/input3 [ 21.815028] usb 2-1.3: new low-speed USB device number 4 using ehci-pci [ 21.898249] usb 2-1.3: New USB device found, idVendor=1c4f, idProduct=0034 [ 21.898252] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 21.898254] usb 2-1.3: Product: Usb Mouse [ 21.898255] usb 2-1.3: Manufacturer: SIGMACHIP [ 21.900987] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1C4F:0034.0002/input/input14 [ 21.901152] hid-generic 0003:1C4F:0034.0002: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.0-1.3/input0 [ 23.193054] r8169 0000:02:00.0 eth0: link down [ 23.193070] r8169 0000:02:00.0 eth0: link down [ 23.589795] NET: Registered protocol family 10 [ 23.590227] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.590274] Segment Routing with IPv6 [ 24.516778] NFSD: the nfsdcld client tracking upcall will be removed in 3.10. Please transition to using nfsdcltrack. [ 24.516780] NFSD: starting 90-second grace period (net ffffffff81ee6400) [ 24.773386] r8169 0000:02:00.0 eth0: link up [ 24.773400] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 35.748078] nct6775: Found NCT6779D or compatible chip at 0x2e:0xa30 [ 36.252940] NET: Registered protocol family 4 [ 36.266545] NET: Registered protocol family 5 [ 145.887086] NFSD: Unable to end grace period: -110 [ 309.194881] usb 1-1.2: 1:1: cannot get freq at ep 0x5 [ 813.692026] usb 2-1.4: new high-speed USB device number 5 using ehci-pci [ 813.771752] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=8178 [ 813.771754] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 813.771756] usb 2-1.4: Product: 802.11n WLAN Adapter [ 813.771757] usb 2-1.4: Manufacturer: Realtek [ 813.771757] usb 2-1.4: SerialNumber: 00e04c000001 [ 813.954745] rtl8192cu: Chip version 0x11 [ 814.031127] rtl8192cu: Board Type 0 [ 814.031368] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 814.031398] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 814.031534] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 814.031712] usbcore: registered new interface driver rtl8192cu [ 814.034508] usbcore: registered new interface driver rtl8xxxu [ 814.114407] rtl8192cu 2-1.4:1.0 wlan125: renamed from wlan0 [ 814.119131] rtl8192cu 2-1.4:1.0 wlan1: renamed from wlan125 [ 872.272098] rtl8192cu: MAC auto ON okay! [ 872.304968] rtl8192cu: Tx queue select: 0x05 [ 872.906879] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 881.042276] rtl8192cu: MAC auto ON okay! [ 881.075282] rtl8192cu: Tx queue select: 0x05 [ 881.677711] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 881.840898] rtl8192cu: MAC auto ON okay! [ 881.874650] rtl8192cu: Tx queue select: 0x05 [ 882.478431] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 885.721281] wlan1: authenticate with 16:6b:72:6d:9d:fc [ 885.747759] wlan1: send auth to 16:6b:72:6d:9d:fc (try 1/3) [ 885.751276] wlan1: authenticated [ 885.752070] wlan1: associate with 16:6b:72:6d:9d:fc (try 1/3) [ 885.768967] wlan1: RX AssocResp from 16:6b:72:6d:9d:fc (capab=0x431 status=0 aid=1) [ 885.872798] wlan1: associated [ 885.873506] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready ## -- nirinA